第五周项目四—静态成员的应用
2015-04-04 19:06
501 查看
/* * Copyright (c) 2014, 烟台大学计算机学院 * All rights reserved. * 文件名称:test.cpp * 作 者:刘佳琦 * 完成日期:2015年 4 月 4 日 * 版 本 号:v1.0 * * 问题描述:设计含有静态数据成员和成员函数的Time类。静态数据成员是类中所有的对象共有的数据,在下面的设计中,时钟要采用12小时制,还是要使用24小时制,显示时,不足两位的数字前是否前导0,都是“影响全局”的设置,适合作为类中的静态数据成员。 * 程序输入:时分秒 * 程序输出:增加后的时分秒 */ #include <iostream> using namespace std; class Time { public: Time(int=0,int=0,int=0); void show_time( ); //根据is_24和from0,输出适合形式-20:23:5/8:23:5 pm/08:23:05 pm void add_seconds(int); //增加n秒钟 void add_minutes(int); //增加n分钟 void add_hours(int); //增加n小时 static void change24(); //改变静态成员is_24,在12和24时制之间转换 static void changefrom0(); //改变静态成员from0,切换是否前导0 private: static bool is_24; //为true时,24小时制,如20:23:5;为flase,12小时制,显示为8:23:5 pm static bool from0; //为true时,前导0,8:23:5显示为08:23:05 int hour; int minute; int sec; }; bool Time::is_24=true; bool Time::from0=false; void Time::change24() { is_24=!is_24; } void Time::changefrom0() { from0=!from0; } Time::Time(int h,int m,int s) { hour=h; minute=m; sec=s; } void Time::show_time( ) { int h; if(is_24) h=hour; else h=hour%12; if (h<10&&from0) cout<<'0'; cout<<h<<':'; if(minute<10&&from0) cout<<'0'; cout<<minute<<':'; if(sec<10&&from0) cout<<'0'; cout<<sec; if(!is_24) { if (hour>12) cout<<" pm"; else cout<<" am"; } cout<<endl; } void Time::add_seconds(int n) { int a; sec+=n; if (sec>59) { a=sec/60; sec-=60*a; add_minutes(a); } } void Time::add_minutes(int n) { int a; minute+=n; if (minute>59) { a=minute/60; minute-=60*a; add_hours(a); } } void Time::add_hours(int n) { hour+=n; if (hour>23) hour%=24; } //下面写出静态成员的初始化及各成员函数的定义void Time::set_time( ) int main( ) { Time t1(23,14,25),t2(8,45,6); cout<<"24小时制,不能导0:"<<endl; cout<<"t1是:"; t1.show_time(); cout<<endl; cout<<"t2是:"; t2.show_time(); cout<<endl; cout<<"10小时后,切换是否前导0:"<<endl; t1.add_hours(10); t2.add_hours(10); Time::changefrom0(); cout<<"t1是:"; t1.show_time(); cout<<endl; cout<<"t2是:"; t2.show_time(); cout<<endl; cout<<"换一种制式:"<<endl; Time::change24(); cout<<"t1是:"; t1.show_time(); cout<<endl; cout<<"t2是:"; t2.show_time(); cout<<endl; cout<<"请按任意键继续..."<<endl; return 0; }
运行结果:
学习心得:在静态成员的应用上有了更深的了解,只有静态的成员函数才能更改静态成员的值,并且又复习了一遍bool型,也第一次使用bool型的成员而不是函数形式,先对bool型的成员赋初值然后再通过另一个静态成员函数进行改变,用if语句判断是否成立,然后输出,其实感觉bool型在OJ刷题上用的也很多。
相关文章推荐
- 第五周项目4-静态成员应用
- 第五周项目4-静态成员应用
- 第五周项目四静态成员应用
- 第五周 项目四--静态成员应用
- 第五周 项目4-静态成员应用
- 第五周项目4 静态成员应用
- 第五周项目四 静态成员应用
- 第五周项目3-静态成员应用
- 第五周项目:静态成员应用
- 第五周项目4-静态成员应用
- 第五周项目4:静态成员应用
- 第五周项目四 静态成员应用
- 第五周项目4 静态成员应用
- 第五周项目四——静态成员应用
- 第五周项目四——静态成员的应用
- 第五周项目4-静态成员应用
- 第五周项目四:静态成员应用
- 第五周上机项目4 静态成员应用
- 第五周项目四 -静态成员应用 由老师版本的完善版
- 第五周上机实践项目4——静态成员应用