AIX HACMP系统错误--NODE同步配置错误
2015-03-31 12:05
501 查看
AIX HACMP系统错误--NODE同步配置错误环境:操作系统: AIX 5300-08集群软件: CRS 10.2.0.1数据库: Oracle 10.2.0.1故障现象: 在构建AXI RAC时,从一个node同步hacmp配置到另一个node时,出现以下错误:
Verification to be performed on the following:
Cluster Topology
Cluster Resources
Verification will automatically correct verification errors.
Retreiving data from available cluster nodes. This could take a few minutes....
Verifying Cluster Topology...
ERROR: Invalid loopback or localhost address on node: aix215.
ERROR: Invalid loopback or localhost address on node: aix216.
Verifying Cluster Resources...
processing RG: oradata10g
ERROR: The HACMP timestamp file for shared volume group: racvg is inconsistent
with the time stamp in the VGDA for the following nodes: aix215 aix216
Starting Corrective Action: cl_resource_modify_vg_time_stamp.
<01> Setting HACMP timestamp for volume group: racvg to 53df30970aea2ef4 on node: aix215: PASS
<02> Setting HACMP timestamp for volume group: racvg to 53df30970aea2ef4 on node: aix216: PASS
-----------------------------------------------------------------
1 problem(s) were resolved.
Verification exiting with error count: 2
cldare: Failures detected during verification. Please correct
the errors and retry this command.
Verification has completed normally.
解决方法:
检查发现,/etc/hosts被修改:
[root@aix215 /]# cat /etc/hosts
127.0.0.1 localhost
192.168.8.215 aix215
192.168.8.216 aix216
192.168.8.209 aix215-vip
192.168.8.210 aix216-vip
10.10.10.215 aix215-priv
10.10.10.216 aix216-priv
更改为:
127.0.0.1 loopback localhost # loopback (lo0) name/address192.168.8.215 aix215192.168.8.216 aix216192.168.8.209 aix215-vip192.168.8.210 aix216-vip10.10.10.215 aix215-priv10.10.10.216 aix216-priv
@重新同步hacmp,问题解决!
本文出自 “天涯客的blog” 博客,请务必保留此出处http://tiany.blog.51cto.com/513694/1536086
Verification to be performed on the following:
Cluster Topology
Cluster Resources
Verification will automatically correct verification errors.
Retreiving data from available cluster nodes. This could take a few minutes....
Verifying Cluster Topology...
ERROR: Invalid loopback or localhost address on node: aix215.
ERROR: Invalid loopback or localhost address on node: aix216.
Verifying Cluster Resources...
processing RG: oradata10g
ERROR: The HACMP timestamp file for shared volume group: racvg is inconsistent
with the time stamp in the VGDA for the following nodes: aix215 aix216
Starting Corrective Action: cl_resource_modify_vg_time_stamp.
<01> Setting HACMP timestamp for volume group: racvg to 53df30970aea2ef4 on node: aix215: PASS
<02> Setting HACMP timestamp for volume group: racvg to 53df30970aea2ef4 on node: aix216: PASS
-----------------------------------------------------------------
1 problem(s) were resolved.
Verification exiting with error count: 2
cldare: Failures detected during verification. Please correct
the errors and retry this command.
Verification has completed normally.
解决方法:
检查发现,/etc/hosts被修改:
[root@aix215 /]# cat /etc/hosts
127.0.0.1 localhost
192.168.8.215 aix215
192.168.8.216 aix216
192.168.8.209 aix215-vip
192.168.8.210 aix216-vip
10.10.10.215 aix215-priv
10.10.10.216 aix216-priv
更改为:
127.0.0.1 loopback localhost # loopback (lo0) name/address192.168.8.215 aix215192.168.8.216 aix216192.168.8.209 aix215-vip192.168.8.210 aix216-vip10.10.10.215 aix215-priv10.10.10.216 aix216-priv
@重新同步hacmp,问题解决!
本文出自 “天涯客的blog” 博客,请务必保留此出处http://tiany.blog.51cto.com/513694/1536086
相关文章推荐
- AIX HACMP系统错误--NODE同步配置错误
- AIX系统维护手册二.双机配置,HACMP
- 使用otter实现MySQL跨机房双向同步 工作流程 环境 目标 名词解释 安装 配置 配置mysql 导入 manager 系统表 导入 node 同步算法依赖的系统表 管理配置 添加zookee
- Awstats日志系统配置文件和错误归纳
- Linux中配置MySQL随系统的启动和关闭同步
- AIX 系统参数配置
- 修复错误配置fstab文件导致系统无法正常启动
- 系统日志W32Time错误-NtpClient 配置
- sharepoint 2010 配置用户同步连接出现错误信息" Unable to process Create message"的一个解决方法
- 水晶报表中"已达到系统管理员配置的最大报表处理作业数限制"错误的处理
- Word编程出现ComException错误:系统配置类型不正确,系统无法开始服务器进程,请检查用户名,密码
- AIX 系统参数配置
- AIX系统参数配置
- [转载]关于wm系统同步时ActiveSync出现85010014错误号的解决办法
- redhat /etc/fstab配置错误导致系统无法启动
- 转水晶报表中"已达到系统管理员配置的最大报表处理作业数限制"错误的处理
- evolution错误--Ubuntu手记之系统配置
- 解决关于"因为配置类型不正确,系统无法开始服务器进程..."的错误
- 配置系统未能初始化 错误的解决方案
- vista bcdedit“无法打开启动配置数据存储,系统找不到指定的文件”错误