Android_自动化测试工具_Calabash(1)
2015-03-20 16:49
447 查看
转:http://blog.csdn.net/jiguanghoverli/article/details/9701165
原博主博客中有关于Calabash的入门级学习,值得推荐! 本人先收藏
I found Calabash the simplest platform that supports cross platform mobile application
automation testing. Another requirement I had was to have the ability to test applications developed using the Mono for Android/ IOS frameworks. Calabash comes in two flavors Calabash-Android and Calabash-IOS and
it also had the option to test in the cloud environment through less-painful which apparently had been acquired by Xamarin.
This post covers only the details of setting up the test environment for Android apps.
Calabash-Android
Calabash supports behavior driven test case development using Cucumber. While the high level test case can be written using predefined step definitions in Cucumber, more complex steps can be defined in Ruby.
Calabash-Android provides lot of predefined steps that supports lot of input steps, gestures, touch, snapshot etc.
Installation
The first step is to setup Ruby. At the time of writing this post(July 1st 2013), Ruby
1.9.3 is the version supported by Calabash-Android. When Installing Ruby make sure the installed directory is set in the environment path(the last step in the installer prompts for this)
After installing Ruby 1.9.3, install the Development kit. Download the correct version of development kit as defined in the Ruby
download page. For Ruby 1.8.6 to 1.9.3, tdm-32-4.5.2 is
the suggested devkit.
Follow the detailed instructions as given here to
setup the devkit. Its basically these steps
Extracting the Devkit installer(7-zip archive) to a <Install> directory.
In the Cmd prompt, enter Cd <Install> , where <Install> is the extracted directory
in the previous step
Then enter, ruby dk.rb init . This would generate the config.yml file which has details about the installed ruby
packages on the system. You can verify that the Ruby 1.9.3 is present in this file
Then enter ruby dk.rb install to finalize the devkit installation
The next step is to install the Calabash-android gem. Enter gem install calabash-android in
the cmd prompt.
Testing the App
Now that the Calabash-android framework is installed and setup the next step is to get the App ready to test. Calabash-Android provides a command utility to easily set up the test project
for the app.
In the cmd prompt, enter the directory in which you want to store the test cases. Let this be the <TestDir>.
Enter cd <TestDir> in
the Cmd prompt.
Then type calabash-android gen to generate the stub files for the test cases.
it would generate the files in this format
features
原博主博客中有关于Calabash的入门级学习,值得推荐! 本人先收藏
I found Calabash the simplest platform that supports cross platform mobile application
automation testing. Another requirement I had was to have the ability to test applications developed using the Mono for Android/ IOS frameworks. Calabash comes in two flavors Calabash-Android and Calabash-IOS and
it also had the option to test in the cloud environment through less-painful which apparently had been acquired by Xamarin.
This post covers only the details of setting up the test environment for Android apps.
Calabash-Android
Calabash supports behavior driven test case development using Cucumber. While the high level test case can be written using predefined step definitions in Cucumber, more complex steps can be defined in Ruby.
Calabash-Android provides lot of predefined steps that supports lot of input steps, gestures, touch, snapshot etc.
Installation
The first step is to setup Ruby. At the time of writing this post(July 1st 2013), Ruby
1.9.3 is the version supported by Calabash-Android. When Installing Ruby make sure the installed directory is set in the environment path(the last step in the installer prompts for this)
After installing Ruby 1.9.3, install the Development kit. Download the correct version of development kit as defined in the Ruby
download page. For Ruby 1.8.6 to 1.9.3, tdm-32-4.5.2 is
the suggested devkit.
Follow the detailed instructions as given here to
setup the devkit. Its basically these steps
Extracting the Devkit installer(7-zip archive) to a <Install> directory.
In the Cmd prompt, enter Cd <Install> , where <Install> is the extracted directory
in the previous step
Then enter, ruby dk.rb init . This would generate the config.yml file which has details about the installed ruby
packages on the system. You can verify that the Ruby 1.9.3 is present in this file
Then enter ruby dk.rb install to finalize the devkit installation
The next step is to install the Calabash-android gem. Enter gem install calabash-android in
the cmd prompt.
Testing the App
Now that the Calabash-android framework is installed and setup the next step is to get the App ready to test. Calabash-Android provides a command utility to easily set up the test project
for the app.
In the cmd prompt, enter the directory in which you want to store the test cases. Let this be the <TestDir>.
Enter cd <TestDir> in
the Cmd prompt.
Then type calabash-android gen to generate the stub files for the test cases.
it would generate the files in this format
features
|_support | |_app_installation_hooks.rb | |_app_life_cycle_hooks.rb | |_env.rb |_step_definitions | |_calabash_steps.rb |_my_first.feature
The .feature file will have the cucumber style test case like this
Feature: Login feature Scenario: As a valid user I can log into my app When I press "Login" Then I see "Welcome to MyApp"
Assuming your app has the welcome screen with Login button and the welcome text, running the login feature test case would succeed without any changes. But typically you
would want to change the login feature file by providing valid login credentials and ensuring that we see the success message. You can achieve this with the Predefined Steps defined by the calabash framework. Assuming you have gone through the calabash android framework fair enough and wrote the required steps to validate the login scenario of your app, you have to sign the .apk file(say com.fun.myapp.apk) with the debug key to test the app.
The following steps need to be followed to run the test
To help the setup process easier, set the Java SDK path and the Android SDK path in the JAVA_HOME and ANDROID_HOME variables. type the following cmd, cd %JAVA_HOME%\bin jarsigner.exe -verbose -sigalg MD5withRSA -digestalg SHA1 -keystore debug.keystore -storepass android -keypass android %~dp0\com.fun.myapp.apk androiddebugkey 3. Allign the .apk file with the following comman cd %ANDROID_HOME%\tools\ zipalign -v 4 %~dp0\com.fun.myapp.apk %~dp0\com.fun.myapp_allign.apk 4. Run the tests and export the report to .html file and also logging the output in the console calabash-android run com.fun.myapp_allign.apk --format html --out report.html --format pretty
You can combine all these steps in a batch to make it convenient to run each time. here is a snapshot of the batch file
Now you should be able to see the output in either the report.html file or in the console. Their report format is really cool and it shows the list of features run and what succeeded and failed with color highlights.http://programmersjunk.blogspot.com/2013/07/android-automation-testing.html
相关文章推荐
- Android_自动化测试工具_Calabash(1)
- Android自动化测试工具 calabash-android
- 自动化测试工具_Calabash-android调研
- Android_自动化测试工具_Calabash(2)
- Android_自动化测试工具_Calabash-android调研
- Android自动化压力测试图解教程——Monkey工具
- Android自动化测试工具——Monkey
- Android自动化测试工具 UiAutomator使用详解
- android 自动化测试工具之monkey
- Android 自动化测试断言工具 fest-android 和多设备测试任务分发工具 Spoon
- Android之自动化压力测试工具:Monkey的使用
- android自动化测试工具
- android自动化测试工具--Monkey介绍
- 国产APP自动化测试工具AndroidRobot下载地址
- android自动化测试工具【UiAutomator】——UiScrollable
- UiAutomator——Android自动化测试工具简要介绍
- Android自动化测试工具实现简述
- ANDROID自动化测试工具合集
- android自动化测试工具之DroidPilot