告别数据线,ADB 的无线使用
2015-03-11 11:28
183 查看
adb is usually used over USB. However, it is also possible to use over Wi-Fi, as described here.
Connect Android device and adb host computer to a common Wi-Fi network accessible to both. We have found that not all access points are suitable; you may need to use an access point whose firewall is configured properly to support adb.
Connect the device with USB cable to host.
Make sure adb is running in USB mode on host.
Connect to the device over USB.
Restart host adb in tcpip mode.
Find out the IP address of the Android device: Settings -> About tablet -> Status -> IP address. Remember the IP address, of the form #.#.#.#.
Connect adb host to device:
Remove USB cable from device, and confirm you can still access device:
You’re now good to go!
If the adb connection is ever lost:
Make sure that your host is still connected to the same Wi-Fi network your Android device is.
Reconnect by executing the “adb connect” step again.
Or if that doesn’t work, reset your adb host:
adb kill-server
and then start over from the beginning.
a1eb
Connect Android device and adb host computer to a common Wi-Fi network accessible to both. We have found that not all access points are suitable; you may need to use an access point whose firewall is configured properly to support adb.
Connect the device with USB cable to host.
Make sure adb is running in USB mode on host.
$ adb usb restarting in USB mode
Connect to the device over USB.
$ adb devices List of devices attached ######## device
Restart host adb in tcpip mode.
$ adb tcpip 5555 restarting in TCP mode port: 5555
Find out the IP address of the Android device: Settings -> About tablet -> Status -> IP address. Remember the IP address, of the form #.#.#.#.
Connect adb host to device:
$ adb connect #.#.#.# connected to #.#.#.#:5555
Remove USB cable from device, and confirm you can still access device:
$ adb devices List of devices attached #.#.#.#:5555 device
You’re now good to go!
If the adb connection is ever lost:
Make sure that your host is still connected to the same Wi-Fi network your Android device is.
Reconnect by executing the “adb connect” step again.
Or if that doesn’t work, reset your adb host:
adb kill-server
and then start over from the beginning.
Reference
https://developer.android.com/tools/help/adb.html#wirelessa1eb
相关文章推荐
- Android开发真机调试-告别数据线-使用无线真机调试
- 告别数据线,使用无线进行真机测试
- 备忘:使用无线连接adb调试
- Adb使用Wifi 无线调试Android
- Android_adb_Wifi_无线调试,脱离数据线/
- 无线adb--不用数据线照样拷贝文件
- 使用adb无线连接手机的步骤
- 放开数据线,让wifi来!AndroidStudio使用adb wifi调试
- minicom 的使用 和 无线adb 调试
- android studio adbwifi 调试android程序 告别数据线
- 使用adb connect对appium进行无线自动化测试
- 使用adb命令进行无线安装调试apk
- adb常见问题整理和使用无线连接调试程序
- adb 常用命令使用+adb 无线调试
- androidstudio中使用adb命令进行无线调试
- Android使用adb实现无线调试
- android sutdio调试无线连接,直正的丢掉数据线 ADB WIFI
- android 无线模式下使用ADB调试
- android 无线模式下使用ADB调试
- 使用adb无线连接手机进行开发和调试,适用于usb host/accessory设备调试