Program Remote Key For 2014 Ford Mustang Via SKP-900

1. Connect SKP-900 Key Programmer to the car. And then turn on the SKP-900 switch, it will enter into main menu, Click “SYSTEM SELECTION” and choose “IMMOBILIZER SYSTEM”



2. Insert the key into keyhole, and turn to the position “ON” (Note: Do not crank the engine)
3. After selecting “IMMOBILIZER SYSTEM”, it will pop out a new interface (shown below), just click “Yes” to continue.





4. Next, it enters into “FUNCTION SELECTION” interface and clicks
“DELETE KEY”, choose “Yes” to proceed. And then appears a message about
your current number of keys, click “Yes” again to continue (Note: Need
about 10 minutes to finish programming).
5. Subsequently, It appears message shown at following picture, just insert the 1st key and turn on the ignition.



6. You will find the light on (mark red).



7. Press “Yes”, it comes out message as below.



8. Insert next key, the light come on and off for a while after turning the ignition on (it turns out to be normal).



9. Therefore, click “NO” to exit. You can test the remote key whether is workable or not.

More key programmers,please visit:http://www.eobd2.fr/wholesale/programmateur-de-cls/