Linux中ifconfig命令不显示IP地址
2015-01-08 10:21
232 查看
Linux中ifconfig命令不显示IP地址
$ ifconfig
bash: ifconfig: command not found
环境:
非root用户登录
$ lsb_release -a
LSB Version: :core-3.0-amd64:core-3.0-ia32:core-3.0-noarch:graphics-3.0-amd64:graphics-3.0-ia32:graphics-3.0-noarch
Distributor ID: CentOS
Description: CentOS release 4.3 (Final)
Release: 4.3
Codename: Final
解决:
$ whereis ifconfig
ifconfig: /sbin/ifconfig.old /sbin/ifconfig /usr/share/man/man8/ifconfig.8.gz /usr/share/man/man8/ifconfig.8
解决二:
查看登录用户的path:
$ echo $PATH
path中没有 /sbin/ifconfig ,添加到path中:
$ export PATH=$PATH:/sbin
再次执行:
$ ifconfig
eth1 Link encap:Ethernet HWaddr XXXXXXXXX
inet addr:XXXXXXXX Bcast:XXXXXXX Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:740213476 errors:0 dropped:398 overruns:0 frame:15
TX packets:1409138987 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:622508623742 (579.7 GiB) TX bytes:1299632841268 (1.1 TiB)
Interrupt:36
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:590326935 errors:0 dropped:0 overruns:0 frame:0
TX packets:590326935 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:121723122294 (113.3 GiB) TX bytes:121723122294 (113.3 GiB)
$ ifconfig
bash: ifconfig: command not found
环境:
非root用户登录
$ lsb_release -a
LSB Version: :core-3.0-amd64:core-3.0-ia32:core-3.0-noarch:graphics-3.0-amd64:graphics-3.0-ia32:graphics-3.0-noarch
Distributor ID: CentOS
Description: CentOS release 4.3 (Final)
Release: 4.3
Codename: Final
解决:
$ whereis ifconfig
ifconfig: /sbin/ifconfig.old /sbin/ifconfig /usr/share/man/man8/ifconfig.8.gz /usr/share/man/man8/ifconfig.8
$ /sbin/ifconfig eth1 Link encap:Ethernet HWaddr XXXXXXX inet addr:XXXXXXXXX Bcast:XXXXXXXX Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:740194638 errors:0 dropped:398 overruns:0 frame:15 TX packets:1409116497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:622505947542 (579.7 GiB) TX bytes:1299620061208 (1.1 TiB) Interrupt:36 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590278628 errors:0 dropped:0 overruns:0 frame:0 TX packets:590278628 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:121711705636 (113.3 GiB) TX bytes:121711705636 (113.3 GiB)
解决二:
查看登录用户的path:
$ echo $PATH
path中没有 /sbin/ifconfig ,添加到path中:
$ export PATH=$PATH:/sbin
再次执行:
$ ifconfig
eth1 Link encap:Ethernet HWaddr XXXXXXXXX
inet addr:XXXXXXXX Bcast:XXXXXXX Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:740213476 errors:0 dropped:398 overruns:0 frame:15
TX packets:1409138987 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:622508623742 (579.7 GiB) TX bytes:1299632841268 (1.1 TiB)
Interrupt:36
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:590326935 errors:0 dropped:0 overruns:0 frame:0
TX packets:590326935 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:121723122294 (113.3 GiB) TX bytes:121723122294 (113.3 GiB)
相关文章推荐
- ifconfig 命令显示HCA卡IP地址的问题
- 在linux下如何用正则表达式执行ifconfig命令,只提取IP地址!
- VMware 虚拟机 linux执行 ifconfig 命令 eth0没有IP地址(intet addr、Bcast、Mask) UP BROADCAST MULTICAST 问题
- ifconfig命令_Linux ifconfig 命令用法详解:配置和显示Linux系统网卡的网络参数
- VMware 虚拟机 linux执行 ifconfig 命令 eth0没有IP地址(intet addr、Bcast、Mask)问题
- linux中使用ifconfig命令查网卡信息显示为eth1,但network-scripts中只有ifcfg-eth0
- 解决虚拟机安装linux后首次输入ifconfig IP地址显示为127.0.0.1
- Linux 网络配置,ifconfig不显示ip地址的解决办法
- 安装Linux后首次输入ifconfig后IP地址显示为127.0.0.1
- linux系统ifconfig命令不显示IP地址或者只显示127.0.0.1
- VMware 虚拟机 linux执行 ifconfig 命令 eth0没有IP地址
- VMware 虚拟机 linux执行 ifconfig 命令 eth0没有IP地址(intet addr、Bcast、Mask) UP BROADCAST MULTICAST 问题
- Linux -- ifconfig命令找不到对应的ip地址的解决办法
- ifconfig命令,不显示IP地址
- 虚拟机下centos6.5系统输入ifconfig命令不能显示ip地址
- Linux下网络显示或设置命令--ifconfig
- VMware 虚拟机 linux执行 ifconfig 命令 eth0没有IP地址
- Linux下永久修改MAC地址和ifconfig命令总结(转)
- linux ifconfig 命令详解
- Linux命令:lsmod 显示已载入系统的模块