nagios 监控 nginx

nagios 监控 nginx

开启防火墙161端口
252.10760.195.252.110
iptables -I INPUT -p udp -s 60.195.252.107 –dport 161 -j ACCEPT
iptables -I INPUT -p udp -s 60.195.252.110 –dport 161 -j ACCEPT

1.在被控端执行操作：把check_nginx插件放进/usr/local/nagios/libexec,并且授权属主和属组为nagios（这点非常关键）
[root@Jiechao libexec]# ll check_nginx
-rwxr-xr-x 1 nagios nagios 7636 Oct 23 22:48 check_nginx
2.vi /usr/local/nagios/etc/nrpe.cfg
添加这行：command[check_nginx]=/usr/local/nagios/libexec/check_nginx -w 15000 -c 20000

3.重启Nrpe:
killall -9 nrpe
/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d

4.被控端执行操作测试：
[root@Jiechao libexec]# ./check_nginx -H 192.168.0.100 -P 80 -p /var/run/ -n nginx.pid -s nginx_status -o /tmp/ -w 15000 -c 20000
OK - nginx is running. 1 requests per second, 1 connections per second (1.00 requests per connection) | 'reqpsec'=1 'conpsec'=1 'conpreq'=1.00 ]
--------------------------------------------------------------------------------------------------------------------------------------------------
下面在Nagios Server端操作：
1.vi /usr/local/nagios/etc/objects/service.cfg
添加：
define service{
use generic-service
host_name Nagios-server,Nagios-client
service_description check_nginx
check_command check_nrpe!check_nginx
max_check_attempts 3
normal_check_interval 3
retry_check_interval 3
check_period 24x7
notification_interval 5
notification_period 24x7
notification_options w,u,c,r
contact_groups admins
process_perf_data 1
action_url /nagios/pnp/index.php?host=$HOSTNAME$&srv=$SERVICEDESC$
}
添加完，保存退出，重启Nagios即可。
/etc/init.d/nagios relaod
/etc/init.d/nagios restart

2.测试：/usr/local/nagios/libexec/check_nrpe -H 192.168.0.100 -c check_nginx
OK - nginx is running. 1 requests per second, 1 connections per second (1.00 requests per connection) | 'reqpsec'=1 'conpsec'=1 'conpreq'=1.00 ]

#---------------------192.168.0.100是我被控端的ip地址------------------------------------------------------

下面是一些注意的地方--
1、关于nginx.pid
--在nginx.conf一定要加上,如:pid /opt/nginx.pid
2、如果出现以下提示.
--UNKNOWN - Local copy/copies of nginx_status is empty.
--可能就是在你的nginx.conf没有配置状态监控,如
server
{
listen 80;
server_name IP | 域名;
location /nginx_status {
stub_status on;
access_log off;
}
}

3.需要更改check_nginx 一个地方：
把hostname="localhost"改为：你需要监控的主机ip。
如：hostname="192.168.0.100"

check_nginx 脚本

#!/bin/sh

PROGNAME=`basename $0`
VERSION="Version 1.0,"
AUTHOR="2009, Mike Adolphs (http://www.matejunkie.com/)"

ST_OK=0
ST_WR=1
ST_CR=2
ST_UK=3
hostname="192.168.0.100"
port=80
path_pid=/var/run
name_pid="nginx.pid"
status_page="nginx_status"
output_dir=/tmp
pid_check=1
secure=0

print_version() {
echo "$VERSION $AUTHOR"
}

print_help() {
print_version $PROGNAME $VERSION
echo ""
echo "$PROGNAME is a Nagios plugin to check whether nginx is running."
echo "It also parses the nginx's status page to get requests and"
echo "connections per second as well as requests per connection. You"
echo "may have to alter your nginx configuration so that the plugin"
echo "can access the server's status page."
echo "The plugin is highly configurable for this reason. See below for"
echo "available options."
echo ""
echo "$PROGNAME -H localhost -P 80 -p /var/run -n nginx.pid "
echo " -s nginx_statut -o /tmp [-w INT] [-c INT] [-S] [-N]"
echo ""
echo "Options:"
echo " -H/--hostname)"
echo " Defines the hostname. Default is: localhost"
echo " -P/--port)"
echo " Defines the port. Default is: 80"
echo " -p/--path-pid)"
echo " Path where nginx's pid file is being stored. You might need"
echo " to alter this path according to your distribution. Default"
echo " is: /var/run"
echo " -n/--name_pid)"
echo " Name of the pid file. Default is: nginx.pid"
echo " -N/--no-pid-check)"
echo " Turn this on, if you don't want to check for a pid file"
echo " whether nginx is running, e.g. when you're checking a"
echo " remote server. Default is: off"
echo " -s/--status-page)"
echo " Name of the server's status page defined in the location"
echo " directive of your nginx configuration. Default is:"
echo " nginx_status"
echo " -o/--output-directory)"
echo " Specifies where to write the tmp-file that the check creates."
echo " Default is: /tmp"
echo " -S/--secure)"
echo " In case your server is only reachable via SSL, use this"
echo " this switch to use HTTPS instead of HTTP. Default is: off"
echo " -w/--warning)"
echo " Sets a warning level for requests per second. Default is: off"
echo " -c/--critical)"
echo " Sets a critical level for requests per second. Default is:"
echo " off"
exit $ST_UK
}

while test -n "$1"; do
case "$1" in
-help|-h)
print_help
exit $ST_UK
;;
--version|-v)
print_version $PROGNAME $VERSION
exit $ST_UK
;;
--hostname|-H)
hostname=$2
shift
;;
--port|-P)
port=$2
shift
;;
--path-pid|-p)
path_pid=$2
shift
;;
--name-pid|-n)
name_pid=$2
shift
;;
--no-pid-check|-N)
pid_check=0
;;
--status-page|-s)
status_page=$2
shift
;;
--output-directory|-o)
output_dir=$2
shift
;;
--secure|-S)
secure=1
;;
--warning|-w)
warning=$2
shift
;;
--critical|-c)
critical=$2
shift
;;
*)
echo "Unknown argument: $1"
print_help
exit $ST_UK
;;
esac
shift
done

get_wcdiff() {
if [ ! -z "$warning" -a ! -z "$critical" ]
then
wclvls=1

if [ ${warning} -gt ${critical} ]
then
wcdiff=1
fi
elif [ ! -z "$warning" -a -z "$critical" ]
then
wcdiff=2
elif [ -z "$warning" -a ! -z "$critical" ]
then
wcdiff=3
fi
}

val_wcdiff() {
if [ "$wcdiff" = 1 ]
then
echo "Please adjust your warning/critical thresholds. The warning \
must be lower than the critical level!"
exit $ST_UK
elif [ "$wcdiff" = 2 ]
then
echo "Please also set a critical value when you want to use \
warning/critical thresholds!"
exit $ST_UK
elif [ "$wcdiff" = 3 ]
then
echo "Please also set a warning value when you want to use \
warning/critical thresholds!"
exit $ST_UK
fi
}

check_pid() {
if [ -f "$path_pid/$name_pid" ]
then
retval=0
else
retval=1
fi
}

get_status() {
if [ "$secure" = 1 ]
then
wget --no-check-certificate -q -t 3 -T 3 \ http://${hostname}:${port}/${status_page} -O ${output_dir}/nginx-status.1
sleep 1
wget --no-check-certificate -q -t 3 -T 3 \ http://${hostname}:${port}/${status_page} -O ${output_dir}/nginx-status.2
else
wget -q -t 3 -T 3 http://${hostname}:${port}/${status_page} \
-O ${output_dir}/nginx-status.1
sleep 1
wget -q -t 3 -T 3 http://${hostname}:${port}/${status_page} \
-O ${output_dir}/nginx-status.2
fi

stat_output1=`stat -c %s ${output_dir}/nginx-status.1`
stat_output2=`stat -c %s ${output_dir}/nginx-status.2`
if [ "$stat_output1" = 0 -o "$stat_output2" = 0 ]
then
echo "UNKNOWN - Local copy/copies of $status_page is empty."
exit $ST_UK
fi
}

get_vals() {
tmp1_reqpsec=`grep '^ ' ${output_dir}/nginx-status.1|awk '{print $3}'`
tmp2_reqpsec=`grep '^ ' ${output_dir}/nginx-status.2|awk '{print $3}'`
reqpsec=`expr $tmp2_reqpsec - $tmp1_reqpsec`

tmp1_conpsec=`grep '^ ' ${output_dir}/nginx-status.1|awk '{print $2}'`
tmp2_conpsec=`grep '^ ' ${output_dir}/nginx-status.2|awk '{print $2}'`
conpsec=`expr $tmp2_conpsec - $tmp1_conpsec`

reqpcon=`echo "scale=2; $reqpsec / $conpsec" | bc -l`
if [ "$reqpcon" = ".99" ]
then
reqpcon="1.00"
fi
}

do_output() {
output="nginx is running. $reqpsec requests per second, $conpsec \
connections per second ($reqpcon requests per connection)"
}

do_perfdata() {
perfdata="'reqpsec'=$reqpsec 'conpsec'=$conpsec 'conpreq'=$reqpcon"
}

# Here we go!
get_wcdiff
val_wcdiff

if [ ${pid_check} = 1 ]
then
check_pid
if [ "$retval" = 1 ]
then
echo "There's no pid file for nginx. Is nginx running? Please \
also make sure whether your pid path and name is correct."
exit $ST_CR
fi
fi

get_status
get_vals
do_output
do_perfdata

if [ -n "$warning" -a -n "$critical" ]
then
if [ "$reqpsec" -ge "$warning" -a "$reqpsec" -lt "$critical" ]
then
echo "WARNING - ${output} | ${perfdata}"
exit $ST_WR
elif [ "$reqpsec" -ge "$critical" ]
then
echo "CRITICAL - ${output} | ${perfdata}"
exit $ST_CR
else
echo "OK - ${output} | ${perfdata} ]"
exit $ST_OK
fi
else
echo "OK - ${output} | ${perfdata}"
exit $ST_OK
fi