H3C S500交换机配置笔记

配置telnet登录

telnet server enable

user-interface vty 0 4

user privilege level 3

authentication-mode password

set authentication password simple 111

配置vlan

进入系统试图，创建vlan(10)：system-view;vlan 10
进入vlan试图，分配端口(端口10-20)：port GigabitEthernet 1/0/10 to GigabitEthernet 1/0/20
进入接口试图，分配IP(192.168.1.1/24)：ip address 192.168.1.1 255.255.255.0

配置DHCP

在全局配置下，开启dhcp：dhcp enable
在接口试图下：dhcp select server global-pool
dhcp server ip-pool vlan10
network 192.168.1.0 mask 255.255.255.0
gateway-list 192.168.1.1
dns-list 119.6.6.6 202.115.32.36 GigabitEthernet 1/0/1

配置链路聚合

进入系统试图：system-view
link-aggregation load-sharing mode source-mac destination-mac
创建二层聚合接口1，并配置为动态模式：

interface bridge-aggregation 1

link-aggregation mode dynamic
将端口1/0/1,1/0/2/加入到聚合口1中：

interface GigabitEthernet 1/0/1

portlink-aggregation group 1

[b] interface GigabitEthernet 1/0/2

portlink-aggregation group 1[/b]

配置端口镜像

创建镜像组1

system-view

mirroring-group 1 local
指定目的端口（1/0/1）

mirroring-group 1 monitor-port GigabitEthernet 1/0/1
指定源端口(1/0/2-1/0/5)

mirroring-group 1 mirroring-port GigabitEthernet 1/0/2 to GigabitEthernet 1/0/5 both

配置静态路由

ip route-static X.X.X.X(目的IP) X.X.X.X(mask) X.x.X.X(下一跳)

配置动态路由

配置RIP

rip 100(rip-pid)

network 192.168.1.0(0.0.0.0)

配置OSPF

ospf 100 router-id 192.168.4.100

area 0.0.0.1

network 192.168.4.0 0.0.0.255

network 192.168.10.0 0.0.0.255

network 192.168.20.0 0.0.0.255

network 192.168.30.0 0.0.0.255