There is an error while getting planid. No Free partitions available
2014-10-07 21:45
1606 查看
问题概述
Oracle Advanced Supply Chain Planning最初的设置职责的时候有点问题,不知是不是要打什么补丁或其它配置什么东东,,
这个提示,,但我查到的分区是还有可用分区的,里面的逻辑关系有点搞乱
解决方法
原因:因为 ORA-02149: 指定的分区不存在
ORA-06512: 在 "SYSTEM.AD_DDL", line 165
ORA-06512: 在 "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 348
ORA-14074: 分区界限必须调整为高于最后一个分区界
Note: 313642.1 - Create Aps Partitions Fails With Ora-2149 Ora-6512 Ora-14501
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=313642.1
Create Aps Partitions Fails With ORA-2149 ORA-6512 ORA-14501 (文档 ID 313642.1)
改动时间:2013-12-16类型:PROBLEM
In this DocumentSymptoms
Cause
Solution
References
--------------------------------------------------------------------------------
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process and therefore has not been subject to an independent technical review.
Applies to:
Oracle Advanced Supply Chain Planning - Version 11.5.8 and later
Information in this document applies to any platform.
EXECUTABLE:MSCCRPAR - Create APS Partitions
***Checked for relevance on 16-DEC-2013***
Symptoms
When attempting to create an ASCP plan name the following error message is generated:
There is an error while getting plan id. No free partitions available.
Profile option MSC:Share Plan Partitions = No
Create APS partitions program - MSCCRPAR - with parameters 0 for instance and 1 for plan fails with the following:
ORACLE error 2149 in FDPSTP
Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
ORA-06512: at "SYSTEM.AD_DDL", line 154
ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 256
ORA-14501: object is not partitioned
Cause
Table msc_exc_details_all is not partitioned
This is one of several tables that must be partitioned and when the MSCCRPAR process goes out to
create a Plan partition, it checks to make sure all of the tables are partitioned first before
creating the new partition. Since this one table is not partitioned, the program errored.
Solution
1. Run the following script to determine which tables owned by MSC are partitioned:
select a.table_name,a.partition_name,a.num_rows
from all_tab_partitions a,dba_part_tables b
where a.table_name = b.table_name
and b.owner = 'MSC'
order by 1,2;
2. Match the output of step 1 with the list of tables in note 137293.1 Appendix B. In this particular case, it was found that table msc_exc_details_all was not partitioned.
3. In order to make this table partitioned, the latest Memory Based Planning Engine patch for 11.5.8 needs to be applied per Section I of note 223026.1. Rerun step 1 to confirm table partitioning after
application of the patch.
4. Rerun MSCCRPAR - Create APS Partitions
References
NOTE:137293.1 - How to Manage APS Partitions in the MSC Schema
NOTE:223026.1 - List of High Priority Patches for the Value Chain Planning (aka APS - Advanced Planning & Scheduling) Applications
Oracle Advanced Supply Chain Planning最初的设置职责的时候有点问题,不知是不是要打什么补丁或其它配置什么东东,,
这个提示,,但我查到的分区是还有可用分区的,里面的逻辑关系有点搞乱
解决方法
原因:因为 ORA-02149: 指定的分区不存在
ORA-06512: 在 "SYSTEM.AD_DDL", line 165
ORA-06512: 在 "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 348
ORA-14074: 分区界限必须调整为高于最后一个分区界
Note: 313642.1 - Create Aps Partitions Fails With Ora-2149 Ora-6512 Ora-14501
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=313642.1
Create Aps Partitions Fails With ORA-2149 ORA-6512 ORA-14501 (文档 ID 313642.1)
改动时间:2013-12-16类型:PROBLEM
In this DocumentSymptoms
Cause
Solution
References
--------------------------------------------------------------------------------
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process and therefore has not been subject to an independent technical review.
Applies to:
Oracle Advanced Supply Chain Planning - Version 11.5.8 and later
Information in this document applies to any platform.
EXECUTABLE:MSCCRPAR - Create APS Partitions
***Checked for relevance on 16-DEC-2013***
Symptoms
When attempting to create an ASCP plan name the following error message is generated:
There is an error while getting plan id. No free partitions available.
Profile option MSC:Share Plan Partitions = No
Create APS partitions program - MSCCRPAR - with parameters 0 for instance and 1 for plan fails with the following:
ORACLE error 2149 in FDPSTP
Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
ORA-06512: at "SYSTEM.AD_DDL", line 154
ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 256
ORA-14501: object is not partitioned
Cause
Table msc_exc_details_all is not partitioned
This is one of several tables that must be partitioned and when the MSCCRPAR process goes out to
create a Plan partition, it checks to make sure all of the tables are partitioned first before
creating the new partition. Since this one table is not partitioned, the program errored.
Solution
1. Run the following script to determine which tables owned by MSC are partitioned:
select a.table_name,a.partition_name,a.num_rows
from all_tab_partitions a,dba_part_tables b
where a.table_name = b.table_name
and b.owner = 'MSC'
order by 1,2;
2. Match the output of step 1 with the list of tables in note 137293.1 Appendix B. In this particular case, it was found that table msc_exc_details_all was not partitioned.
3. In order to make this table partitioned, the latest Memory Based Planning Engine patch for 11.5.8 needs to be applied per Section I of note 223026.1. Rerun step 1 to confirm table partitioning after
application of the patch.
4. Rerun MSCCRPAR - Create APS Partitions
References
NOTE:137293.1 - How to Manage APS Partitions in the MSC Schema
NOTE:223026.1 - List of High Priority Patches for the Value Chain Planning (aka APS - Advanced Planning & Scheduling) Applications
相关文章推荐
- There is an error while getting planid. No Free partitions available
- There is an internal error in the React performance measurement code.Did not expect componentDidMount timer to start while render timer is still in progress for another instance
- Error 010096:there is no spatial analyst license currently available or enabled
- [原]openstack-kilo--issue(十九) ImportError: Could not import settings 'openstack_dashboard.settings' (Is it on sys.path? Is there an import error in the settings file?): No module named main
- ERROR 010096: There is no Spatial Analyst license currently available or enabled.
- There was an error getting information about “/” while copying to desktop
- Jetty7.6.X java.err.nojdk 错误,jetty8.1There is an error in invoking javac解决方法
- There is no READABLE property named 'day' in class 'java.lang.String';You have an error in your SQL
- 运行rails server 出现There was an error while trying to load the gem 'uglifier'. (Bundler::GemRequireErr
- xsession 登陆失败,查看日志后解决问题 错误为[ERROR] X server -- no display in range is available
- org.apache.jasper.JasperException: PWC6345: There is an error in invoking javac. A full JDK (not ju
- [ERROR] The goal you specified requires a project to execute but there is no POM in this directory
- jetty访问jsp页面出现PWC6345: There is an error in invoking javac. A full JDK (not just JRE) is required
- eth0: ERROR while getting interface flags: No such device
- 关于there is no cource code available for the current的解决方法
- There is no source code available for the current location.
- Manage Metadata Service Error: There are no addresses available for this application
- There is no source code available for the current location
- debian There is no publickey available forthe following key IDs:
- psycopg2.ProgrammingError: execute cannot be used while an asynchronous query is underway