openwrt 有线无线配置

先配置有线

设置lan ip(即访问路由的ip)

uci set network.lan.ipaddr=[lan ip]

复制代码
pppoe用户

uci set network.wan.proto=pppoe //设置wan口类型为pppoe

uci set network.wan.username=[上网帐户]

uci set network.wan.password=[上网密码] //这两行设置pppoe用户名和密码

复制代码
如果要挂在上级路由下面就这样

uci set network.wan.proto=none //关掉wan

uci set network.lan.gateway=[上级路由ip] //网关指向上级路由

uci set network.lan.dns=[上级路由ip] //dns指向上级路由

uci set dhcp.lan.ignore=1 //关掉lan的dhcp

复制代码
然后是无线

uci set wireless.@wifi-device[0].disabled=0 //打开无线

uci set wireless.@wifi-device[0].txpower=17 //设置功率为17dbm 太高会烧无线模块

uci set wireless.@wifi-device[0].channel=6 //设置无线信道为6

uci set wireless.@wifi-iface[0].mode=ap //设置无线模式为ap

uci set wireless.@wifi-iface[0].ssid=[自己设置SSID] //设置无线SSID

uci set wireless.@wifi-iface[0].network=lan //无线链接到lan上

uci set wireless.@wifi-iface[0].encryption=psk2 //设置加密为WPA2-PSK

uci set wireless.@wifi-iface[0].key=[密码] //设置无线密码

复制代码
最后应用配置

uci commit //应用

/etc/init.d/network restart //重启网络服务

复制代码