华为三层交换Vlan配置

Vlan配置学习目的
了解vlan的意义

理解vlan的安全表现

掌握vlan的配置

掌握Access接口与Trunk接口的配置

掌握将接口与vlan关联的配置

掌握Hybrid接口的配置

拓扑图



场景：
你是公司的网络管理员。当前网络中需要部署vlan。购置了两台交换机。你需要部署vlan和其它特性。
学习任务
步骤一.Eth-trunk链路聚合
实验之前，需要关闭部分设备接口，避免影响本次实验。
本次实验需要关闭S3的E0/0/1、E0/0/23接口，另外需要关闭S4的E0/0/14接口。
S1与S2之间的两条链路，如果开启STP，则会有一条链路被禁用，造成带宽的浪费；如果不适用STP，则会造成环路。但是如果使用Eth-trunk，则可以很好的解决这个问题。
配置Eth-trunk之前，必须清楚接口原有配置信息。
配置Eth-trunk时，可以将物理接口加入Eth-trunk组，也可以在Eth-trunk配置模式下，添加物理接口。
S1使用第一种模式配置Eth-trunk与物理接口之间的关联关系。
[Huawei]sysname S1
[S1]interface eth-trunk 1
[S1-Eth-Trunk1]q
[S1]interface g0/0/9
[S1-GigabitEthernet0/0/9]eth-trunk 1
[S1-GigabitEthernet0/0/9]interface g0/0/10
[S1-GigabitEthernet0/0/10]eth-trunk 1
Info: This operation may take a fewseconds. Please wait for a moment...done.
S2使用第二种模式配置Eth-trunk与物理接口之间的关联关系。
[Huawei]sysnam S2
[S2]interface eth-trunk 1
[S2-Eth-Trunk1]trunkport g0/0/9
Info: This operation may take a fewseconds. Please wait for a moment...done.
[S2-Eth-Trunk1]trunkport g0/0/10
Info: This operation may take a fewseconds. Please wait for a moment...done.
接口默认的链路类型黑Hybird类型，可以直接修改链路类型为trunk类型。另外需要注意的是，默认情况下，接口的trunk功能禁止所有vlan的数据传输过去。
[S1]interface Eth-Trunk 1
[S1-Eth-Trunk1]port link-type trunk
[S1-Eth-Trunk1]port trunk allow-pass vlanall

[S2]interface Eth-Trunk 1
[S2-Eth-Trunk1]port link-type trunk
[S2-Eth-Trunk1]port trunk allow-pass vla
步骤二.配置vlan
实验中S3、R1、R3、S4模拟为主机进行测试。其中S3属于vlan3、R1、R3属于vlan4、S4属于vlan5
配置号码连续的多个vlan的方式有两种。实验中分别演示。
定义vlan与接口的对应关系也有两种，试验中分别演示。
[S1]interface g0/0/13
[S1-GigabitEthernet0/0/13]port link-typeaccess
[S1-GigabitEthernet0/0/13]interface g0/0/1
[S1-GigabitEthernet0/0/1]port link-typeaccess
[S1-GigabitEthernet0/0/1]vlan 3
[S1-vlan3]port gi0/0/13
[S1-vlan3]vlan 4
[S1-vlan4]port gi0/0/1
[S1-vlan4]vlan 5

[S2]vlan batch 3 to 5
[S2]interface g0/0/2
[S2-GigabitEthernet0/0/2]port link-typeaccess
[S2-GigabitEthernet0/0/2]port default vlan4
[S2-GigabitEthernet0/0/2]interface g0/0/22
[S2-GigabitEthernet0/0/22]port link-typeaccess
[S2-GigabitEthernet0/0/22]port default vlan5
步骤三.规划地址
R1、R3、S3和S4模拟为客户端，测试vlan配置效果。
需要各自配置接口地址、其中交换机物理接口无法配置地址。在vlanif1接口配置IP地址。
[Huawei]sysname S3
[S3]interface vlanif 1
[S3-Vlanif1]ip add 10.0.3.3 24

[Huawei]sysname R1
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]ip add 10.0.4.1 24
[R1-GigabitEthernet0/0/1]

[Huawei]sysname R3
[R3]interface g0/0/2
[R3-GigabitEthernet0/0/2]ip add 10.0.4.3 24

[Huawei]sysname S4
[S4]interface vlanif 1
[S4-Vlanif1]ip add 10.0.5.4 24

步骤四.测试
使用ping命令，正常情况下，同属于vlan4的R1与R3之间可以通讯，其余两两相互不能通讯。
<R3>ping 10.0.4.1
PING 10.0.4.1: 56 data bytes,press CTRL_C to break
Reply from 10.0.4.1: bytes=56 Sequence=1 ttl=255 time=150 ms
Reply from 10.0.4.1: bytes=56 Sequence=2 ttl=255 time=50 ms
Reply from 10.0.4.1: bytes=56 Sequence=3 ttl=255 time=60 ms
Reply from 10.0.4.1: bytes=56 Sequence=4 ttl=255 time=80 ms
Reply from 10.0.4.1: bytes=56 Sequence=5 ttl=255 time=70 ms

---10.0.4.1 ping statistics ---
5packet(s) transmitted
5packet(s) received
0.00% packet loss
round-tripmin/avg/max = 50/82/150 ms其余设备之间则无法相互通讯，可以测试R1与R3之间、R3与R4之间通讯情况 在S1上为每个vlan配置一个管理地址。相当于在S1连接了三台客户端，属于vlan3、4、5.
[S1]interface vlanif 3
[S1-Vlanif3]ip add 10.0.3.11 24
[S1-Vlanif3]interface vlanif 4
[S1-Vlanif4]ip add 10.0.4.11 24.
[S1-Vlanif4]interface vlanif 5
[S1-Vlanif5]ip add 10.0.5.11 24
[S1-Vlanif5]q
配置完成后，可以在S1上测试所有vlan内部客户端是否正常通讯。
[S1]ping 10.0.3.3
PING 10.0.3.3: 56 data bytes,press CTRL_C to break
Reply from 10.0.3.3: bytes=56 Sequence=1 ttl=255 time=260 ms
Reply from 10.0.3.3: bytes=56 Sequence=2 ttl=255 time=40 ms
Reply from 10.0.3.3: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 10.0.3.3: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 10.0.3.3: bytes=56 Sequence=5 ttl=255 time=20 ms

---10.0.3.3 ping statistics ---
5packet(s) transmitted
5packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/82/260 ms

[S1]ping 10.0.4.1
PING 10.0.4.1: 56 data bytes,press CTRL_C to break
Reply from 10.0.4.1: bytes=56 Sequence=1 ttl=255 time=70 ms
Reply from 10.0.4.1: bytes=56 Sequence=2 ttl=255 time=50 ms
Reply from 10.0.4.1: bytes=56 Sequence=3 ttl=255 time=40 ms
Reply from 10.0.4.1: bytes=56 Sequence=4 ttl=255 time=50 ms
Reply from 10.0.4.1: bytes=56 Sequence=5 ttl=255 time=30 ms

---10.0.4.1 ping statistics ---
5packet(s) transmitted
5packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/48/70 ms

[S1]ping 10.0.4.3
PING 10.0.4.3: 56 data bytes,press CTRL_C to break
Reply from 10.0.4.3: bytes=56 Sequence=1 ttl=255 time=110 ms
Reply from 10.0.4.3: bytes=56 Sequence=2 ttl=255 time=70 ms
Reply from 10.0.4.3: bytes=56 Sequence=3 ttl=255 time=60 ms
Reply from 10.0.4.3: bytes=56 Sequence=4 ttl=255 time=50 ms
Reply from 10.0.4.3: bytes=56 Sequence=5 ttl=255 time=80 ms

---10.0.4.3 ping statistics ---
5packet(s) transmitted
5packet(s) received
0.00% packet loss
round-trip min/avg/max = 50/74/110 ms

[S1]ping 10.0.5.4
PING 10.0.5.4: 56 data bytes,press CTRL_C to break
Reply from 10.0.5.4: bytes=56 Sequence=1 ttl=255 time=110 ms
Reply from 10.0.5.4: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 10.0.5.4: bytes=56 Sequence=3 ttl=255 time=40 ms
Reply from 10.0.5.4: bytes=56 Sequence=4 ttl=255 time=90 ms
Reply from 10.0.5.4: bytes=56 Sequence=5 ttl=255 time=60 ms

---10.0.5.4 ping statistics ---
5packet(s) transmitted
5packet(s) received
0.00% packet loss
round-tripmin/avg/max = 40/72/110 ms步骤五.掌握Hybrid接口的配置
Hybrid接口与trunk接口类似。但是增加了一些功能，可以实现在不同vlan的用户通讯，比如实验中S3与R3设备。当前他们首先需要在同一网段。
修改S3与R3地址[S3]interface vlanif 1
[S3-Vlanif1]ip add 10.0.6.3 24
[S3-Vlanif1]

[R3]interface g0/0/2
[R3-GigabitEthernet0/0/2]ip add 10.0.6.4 24

定义S1的G0/0/13/接口为Hybird接口，属于vlan3.对vlan3和vlan4定义为Untagged。注意修改链路类型之前，需要删除接口的额外配置。
[S1]interface g0/0/13
[S1-GigabitEthernet0/0/13]undo port defaultvlan
[S1-GigabitEthernet0/0/13]port link-typehybrid
[S1-GigabitEthernet0/0/13]port hybrid pvidvlan 3
[S1-GigabitEthernet0/0/13]port hybriduntagged vlan 3 to 4
定义S2的G0/0/2接口为Hybird接口，属于vlan4.对vlan3和vlan4定义为Untagged。
[S2]interface g0/0/2
[S2-GigabitEthernet0/0/2]undo port defaultvlan
[S2-GigabitEthernet0/0/2]port link-typehybrid
[S2-GigabitEthernet0/0/2]port hybrid pvidvlan 4
[S2-GigabitEthernet0/0/2]port hybriduntagged vlan 3 to 4
此时S3与R3虽然在不同网段，但是可以实现互通。
<S3>ping 10.0.6.4
PING 10.0.6.4: 56 data bytes,press CTRL_C to break
Reply from 10.0.6.4: bytes=56 Sequence=1 ttl=255 time=170 ms
Reply from 10.0.6.4: bytes=56 Sequence=2 ttl=255 time=90 ms
Reply from 10.0.6.4: bytes=56 Sequence=3 ttl=255 time=60 ms
Reply from 10.0.6.4: bytes=56 Sequence=4 ttl=255 time=60 ms
Reply from 10.0.6.4: bytes=56 Sequence=5 ttl=255 time=90 ms

---10.0.6.4 ping statistics ---
5packet(s) transmitted
5packet(s) received
0.00% packet loss
round-trip min/avg/max = 60/94/170 ms

附件：http://down.51cto.com/data/2364612