Linux命令exit - 退出当前shell
2014-05-25 23:46
801 查看
exit命令用于退出当前shell,在shell脚本中可以终止当前脚本执行。 常用参数格式:exit n退出。设…
退出。设置退出码为n。(Cause the shell to exit with a status of n.)
格式:exit
退出。退出码不变,即为最后一个命令的退出码。(If n is omitted, the exit status is that of the last command executed. )
格式:$?
上一个命令的退出码。
格式:trap "commands" EXIT
退出时执行commands指定的命令。( A trap on EXIT is executed before the shell terminates.)
退出码(exit status,或exit code)的约定:
0表示成功(Zero - Success)
非0表示失败(Non-Zero - Failure)
2表示用法不当(Incorrect Usage)
127表示命令没有找到(Command Not Found)
126表示不是可执行的(Not an executable)
>=128 信号产生
man 3 exit 写道
The C standard specifies two constants, EXIT_SUCCESS and EXIT_FAILURE, that may be passed to exit() to indicate
successful or unsuccessful termination, respectively.
以下摘自/usr/include/stdlib.h
C代码
#define EXIT_FAILURE 1 /* Failing exit status. */
#define EXIT_SUCCESS 0 /* Successful exit status. */
BSD试图对退出码标准化。
man 3 exit 写道
BSD has attempted to standardize exit codes; see the file <sysexits.h>.
以下摘自/usr/include/sysexits.h
C代码
#define EX_OK 0 /* successful termination */
#define EX__BASE 64 /* base value for error messages */
#define EX_USAGE 64 /* command line usage error */
#define EX_DATAERR 65 /* data format error */
#define EX_NOINPUT 66 /* cannot open input */
#define EX_NOUSER 67 /* addressee unknown */
#define EX_NOHOST 68 /* host name unknown */
#define EX_UNAVAILABLE 69 /* service unavailable */
#define EX_SOFTWARE 70 /* internal software error */
#define EX_OSERR 71 /* system error (e.g., can't fork) */
#define EX_OSFILE 72 /* critical OS file missing */
#define EX_CANTCREAT 73 /* can't create (user) output file */
#define EX_IOERR 74 /* input/output error */
#define EX_TEMPFAIL 75 /* temp failure; user is invited to retry */
#define EX_PROTOCOL 76 /* remote error in protocol */
#define EX_NOPERM 77 /* permission denied */
#define EX_CONFIG 78 /* configuration error */
#define EX__MAX 78 /* maximum listed value */
示例一 退出当前shell
[root@new55 ~]#
[root@new55 ~]# exit
logout
示例二 在脚本中,进入脚本所在目录,否则退出
Bash代码
cd $(dirname $0) || exit 1
示例三 在脚本中,判断参数数量,不匹配就打印使用方式,退出
Bash代码
if [ "$#" -ne "2" ]; then
echo "usage: $0 <area> <hours>"
exit 2
fi
示例四 在脚本中,退出时删除临时文件
Bash代码
trap "rm -f tmpfile; echo Bye." EXIT
示例五 检查上一命令的退出码
Bash代码
./mycommand.sh
EXCODE=$?
if [ "$EXCODE" == "0" ]; then
echo "O.K"
fi
Linux exit 命令
【2】曲径通幽
[概念]exit n
【3】Linux大学
Bash Shell Exit Status Tutorial with Practical Examples
用途说明
exit命令用于退出当前shell,在shell脚本中可以终止当前脚本执行。常用参数
格式:exit n退出。设置退出码为n。(Cause the shell to exit with a status of n.)
格式:exit
退出。退出码不变,即为最后一个命令的退出码。(If n is omitted, the exit status is that of the last command executed. )
格式:$?
上一个命令的退出码。
格式:trap "commands" EXIT
退出时执行commands指定的命令。( A trap on EXIT is executed before the shell terminates.)
退出码(exit status,或exit code)的约定:
0表示成功(Zero - Success)
非0表示失败(Non-Zero - Failure)
2表示用法不当(Incorrect Usage)
127表示命令没有找到(Command Not Found)
126表示不是可执行的(Not an executable)
>=128 信号产生
man 3 exit 写道
The C standard specifies two constants, EXIT_SUCCESS and EXIT_FAILURE, that may be passed to exit() to indicate
successful or unsuccessful termination, respectively.
以下摘自/usr/include/stdlib.h
C代码
#define EXIT_FAILURE 1 /* Failing exit status. */
#define EXIT_SUCCESS 0 /* Successful exit status. */
BSD试图对退出码标准化。
man 3 exit 写道
BSD has attempted to standardize exit codes; see the file <sysexits.h>.
以下摘自/usr/include/sysexits.h
C代码
#define EX_OK 0 /* successful termination */
#define EX__BASE 64 /* base value for error messages */
#define EX_USAGE 64 /* command line usage error */
#define EX_DATAERR 65 /* data format error */
#define EX_NOINPUT 66 /* cannot open input */
#define EX_NOUSER 67 /* addressee unknown */
#define EX_NOHOST 68 /* host name unknown */
#define EX_UNAVAILABLE 69 /* service unavailable */
#define EX_SOFTWARE 70 /* internal software error */
#define EX_OSERR 71 /* system error (e.g., can't fork) */
#define EX_OSFILE 72 /* critical OS file missing */
#define EX_CANTCREAT 73 /* can't create (user) output file */
#define EX_IOERR 74 /* input/output error */
#define EX_TEMPFAIL 75 /* temp failure; user is invited to retry */
#define EX_PROTOCOL 76 /* remote error in protocol */
#define EX_NOPERM 77 /* permission denied */
#define EX_CONFIG 78 /* configuration error */
#define EX__MAX 78 /* maximum listed value */
使用示例
示例一 退出当前shell
[root@new55 ~]#[root@new55 ~]# exit
logout
示例二 在脚本中,进入脚本所在目录,否则退出
Bash代码cd $(dirname $0) || exit 1
示例三 在脚本中,判断参数数量,不匹配就打印使用方式,退出
Bash代码if [ "$#" -ne "2" ]; then
echo "usage: $0 <area> <hours>"
exit 2
fi
示例四 在脚本中,退出时删除临时文件
Bash代码trap "rm -f tmpfile; echo Bye." EXIT
示例五 检查上一命令的退出码
Bash代码./mycommand.sh
EXCODE=$?
if [ "$EXCODE" == "0" ]; then
echo "O.K"
fi
问题思考
相关资料
【1】91linuxLinux exit 命令
【2】曲径通幽
[概念]exit n
【3】Linux大学
Bash Shell Exit Status Tutorial with Practical Examples
相关文章推荐
- Linux命令之exit - 退出当前shell【返回值状态】
- exit命令_Linux exit 命令用法详解:退出当前的shell
- Linux命令之exit - 退出当前shell
- Linux命令exit - 退出当前shell
- Linux命令之exit - 退出当前shell
- Linux命令之exit - 退出当前shell【返回值状态】
- 我使用过的Linux命令之exit - 退出当前shell
- logout命令_Linux logout 命令用法详解:退出当前登录的Shell
- Linux exit退出目前的shell命令详解
- 【Unix/Linux.Shell Script】退出状态,exit命令
- Linux Shell学习笔记:exit退出状态代码
- Linux下多线程编程__线程的创建pthread_create与退出pthread_exit,等待当前线程退出pthread_join,获取线程ID pthread_self
- linux在退出当前用户的时候需要完成的命令
- 在Linux命令行下查询当前所使用的shell版本与种类的方法
- LINUX退出当前进程——比较return、exit()和_exit()函数
- Shell中的特殊变量$?-查看上一条Shell命令的退出状态码(exit status)
- linux命令之查看当前shell环境变量-env
- shell中exit命令不退出脚本
- control + D 退出linux 当前命令(行)
- 〖Linux〗以后台方式启动/结束指定程序/命令(不受 exit 或点击窗口关闭按钮等终端退出操作的影响)