OK6410 nboot+eboot启动WinCE6.0串口输出消息

WinCE 6.0 Steploader for SMDK6410

Launch Eboot...

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Nov 4 2011 17:06:29

Microsoft Windows CE Bootloader for the Samsung SMDK6410 Version 2.4 Built Nov 4 2011

[FMD] ++FMD_Init() ****

[FMD:INF] FMD_Init() : Read ID = 0x0000ecd7

[FMD] FMD_Init() : NUM_OF_BLOCKS = 8192

[FMD] FMD_Init() : PAGES_PER_BLOCK = 128

[FMD] FMD_Init() : SECTORS_PER_PAGE = 8

[FMD] --FMD_Init()

[FMD] FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)

[FMD] FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 0 seconds.

Launching image from boot media ...

OEMPlatformInit: IMAGE_TYPE_RAMIMAGE

Loading Kernel......

..........................ECC_CorrectData 1, 1, a1, 40

.........ECC_CorrectData 1, 1, 138, 2

...........

System ready!

Preparing for download...

INFO: *** Device Name 'SMDK64100' ***

INFO: Using static IP address 0000.

INFO: Using subnet mask 2525250.

waitforconnect

INFO: using TOC[1] dwJumpAddress: 0x8015768c

INFO: OEMLaunch: Jumping to Physical Address 0x5015768Ch (Virtual Address 0x8015768Ch)...

Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 25 2009 at 11:04:23

[OAL] ++OEMInit()

[OAL] S3C6410_APLL_CLK : 532000000

[OAL] ARMCLK : 532000000

[OAL] HCLK : 133000000

[OAL] PCLK : 66500000

[OAL] InitializeGPIO()

[OAL] InitializeCLKSource()

[OAL] InitializeCLKGating()

[OAL] InitializeBlockPower()

DCache: 128 sets, 4 ways, 32 line size, 16384 size

ICache: 128 sets, 4 ways, 32 line size, 16384 size

Arguments area has some values

+OALTimerInit( 1, 33249, 0 )

-OALIntrRequestSysIntr(irq = 38, sysIntr = 16)

[OAL] --OEMInit()

[FMD] ++FMD_Init() ****

[FMD:INF] FMD_Init() : Read ID = 0x0000ecd7

[FMD] FMD_Init() : NUM_OF_BLOCKS = 8192

[FMD] FMD_Init() : PAGES_PER_BLOCK = 128

[FMD] FMD_Init() : SECTORS_PER_PAGE = 8

[FMD] --FMD_Init()

[FMD] FMD_OEMIoControl() : IOCTL_FMD_GET_INTERFACE

[FMD] FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)

[FMD] FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)

[FMD] FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)

[FMD:ERR] FMD_OEMIoControl() : Unknown IOCTL (0x00071c24)

[FMD] FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)

[OAL] Not Clear System Hive

[OAL] Not Clear User Hive

[OAL] Not Clear System Hive

[PWRCON] PWC_Init***

-OALIntrRequestSysIntr(irq = 11, sysIntr = 18)

-OALIntrRequestSysIntr(irq = 9, sysIntr = 19)

-OALIntrRequestSysIntr(irq = 40, sysIntr = 20)

-OALIntrRequestSysIntr(irq = 19, sysIntr = 21)

-OALIntrRequestSysIntr(irq = 23, sysIntr = 22)

-OALIntrRequestSysIntr(irq = 20, sysIntr = 23)

-OALIntrRequestSysIntr(irq = 88, sysIntr = 24)

-OALIntrRequestSysIntr(irq = 73, sysIntr = 25)

-OALIntrRequestSysIntr(irq = 74, sysIntr = 26)

[HSMMC0] Initializing the HSMMC Host Controller

-OALIntrRequestSysIntr(irq = 94, sysIntr = 27)

[HSMMC0] Turn OFF the F/B delay control.

[HSMMC1] Initializing the HSMMC Host Controller

-OALIntrRequestSysIntr(irq = 7, sysIntr = 28)

-OALIntrRequestSysIntr(irq = 95, sysIntr = 29)

[HSMMC0] Card is Inserted!

[HSMMC1] Turn OFF the F/B delay control.

[HSMMC1] Card is Inserted!

WARN: OALIoCtlHalGetHWEntropy: Buffer too small

[HSMMC0] Turn OFF the F/B delay control.

[HSMMC0] Setting for 1 bit mode , Clock Rate = 100000 Hz

[HSMMC0] Turn OFF the F/B delay control.

ERR CMD:5 : ERR CMD:1 : [HSMMC1] Turn OFF the F/B delay control.

[HSMMC1] Setting for 1 bit mode , Clock Rate = 100000 Hz

[HSMMC1] Turn OFF the F/B delay control.

ERR CMD:5 : ERR CMD:8 : ERR CMD:1 : ERR CMD:55 : [HSMMC1] CMD Timeout Error...

<Davicom DM9000A driver for WinCE 6.0>

<DM9:++MiniportIntialize>

[dm9: Tries to map io space with 18000000]

[dm9: The mapped address is D2E60000]

[dm9: Chip signature is 0A469000]

<DM9:--MiniportIntialize>

[UFNPDD] USB Serial Function Class Enabled

[USB] dii.dwIrq = 96

-OALIntrRequestSysIntr(irq = 96, sysIntr = 30)

Current Client "Serial_Cl[SDBUS] SD Card Spec Version : 2.00

ass"

[SDBUS] SD/SDHC doesn't support the high-speed mode.

[HSMMC0] Setting for 4 bit mode , Clock Rate = 25000000 Hz

[HSMMC0] Turn OFF the F/B delay control.

[UFNPDD] USB Serial Function Class Enabled

DEBUG: CreateSerialObject 3

-OALIntrRequestSysIntr(irq = 64, sysIntr = 31)

DEBUG: CreateSerialObject 2

-OALIntrRequestSysIntr(irq = 63, sysIntr = 32)

DEBUG: CreateSerialObject 1

-OALIntrRequestSysIntr(irq = 62, sysIntr = 33)

[USBH] HcdPdd_Init()

[USBH] ++InitializeOHCI()

[USBH] --InitializeOHCI() : Success

-OALIntrRequestSysIntr(irq = 13, sysIntr = 34)

-OALIntrRequestSysIntr(irq = 14, sysIntr = 36)

[MFC POWER] Power is up.

[MFC POWER] Power is down-OALIntrRequestSysIntr(irq = 26, sysIntr = 37)

MFC Interrupt has been initialized.

[MFC IOCTL_POWER_CAPABILITIES]

[MFC IOCTL_POWER_CAPABILITIES] leaving...

[MFC POWER] Power is up.

[MFC POWER] Power is down

LED - DLL_PROCESS_ATTACH

LED - DLL_PROCESS_ATTACH

ADC - DLL_PROCESS_ATTACH

ADC - DLL_PROCESS_ATTACH

BEE - DLL_PROCESS_ATTACH

BEE - DLL_PROCESS_ATTACH

TEM - DLL_PROCESS_ATTACH

TEM - DLL_PROCESS_ATTACH

-OALIntrRequestSysIntr(irq = 18, sysIntr = 38)

[DISPDRV] S3C6410Disp:Close FLprogressbar thread

[DISPDRV] S3C6410Disp::S3C6410Disp()

-OALIntrRequestSysIntr(irq = 21, sysIntr = 39)

2D Sysintr : 39

[DISPDRV:] S3C6410Disp() : m_pDispConReg->VIDTCON2 = efb1f

[OAL] LcdWidth(800) LcdHeight(480)

ChangeDisplaySettingsEx changed rotation angle to 0

++[KEYBD]KeybdDriverInitializeAddresses

++[KEYBD]KeyMatrix::KeybdPowerOn

+Select all column

--[KEYBD]KeyMatrix::KeybdPowerOn

+[KEYBD]IsrThreadStart:

-[KEYBD]IsrThreadStart:

-OALIntrRequestSysIntr(irq = 100, sysIntr = 40)

-OALIntrRequestSysIntr(irq = 37, sysIntr = 41)

TIME=[a25a7]

+[KEYBD]IsrThreadProc

-OALIntrRequestSysIntr(irq = 32, sysIntr = 42)

+[KEYBD]Enter Infinite Loop

ERR CMD:17 : DAT Timeout Error...

[UFNPDD] OTG Cable Attached

[UFNPDD] RESET Again

ERR CMD:17 : DAT Timeout Error...

ERR CMD:17 : DAT Timeout Error...

ERR CMD:17 : DAT Timeout Error...

ERR CMD:17 : DAT Timeout Error...

ERR CMD:17 : DAT Timeout Error...

ERR CMD:17 : DAT Timeout Error...

ERR CMD:17 : DAT Timeout Error...