64BASE编解码
2014-03-19 00:25
344 查看
/*********************************************************************\
MODULE NAME: b64
AUTHOR: Bob Trower 08/04/01
PROJECT: Crypt Data Packaging
COPYRIGHT: Copyright (c) Trantor Standard Systems Inc., 2001
NOTE: This source code may be used as you wish, subject to
the MIT license. See the LICENCE section below.
DESCRIPTION:
This little utility implements the Base64
Content-Transfer-Encoding standard described in
RFC1113 (http://www.faqs.org/rfcs/rfc1113.html).
This is the coding scheme used by MIME to allow
binary data to be transferred by SMTP mail.
Groups of 3 bytes from a binary stream are coded as
groups of 4 bytes in a text stream.
The input stream is 'padded' with zeros to create
an input that is an even multiple of 3.
A special character ('=') is used to denote padding so
that the stream can be decoded back to its exact size.
Encoded output is formatted in lines which should
be a maximum of 72 characters to conform to the
specification. This program defaults to 72 characters,
but will allow more or less through the use of a
switch. The program enforces a minimum line size
of 4 characters.
Example encoding:
The stream 'ABCD' is 32 bits long. It is mapped as
follows:
ABCD
A (65) B (66) C (67) D (68) (None) (None)
01000001 01000010 01000011 01000100
16 (Q) 20 (U) 9 (J) 3 (D) 17 (R) 0 (A) NA (=) NA (=)
010000 010100 001001 000011 010001 000000 000000 000000
QUJDRA==
Decoding is the process in reverse. A 'decode' lookup
table has been created to avoid string scans.
DESIGN GOALS: Specifically:
Code is a stand-alone utility to perform base64
encoding/decoding. It should be genuinely useful
when the need arises and it meets a need that is
likely to occur for some users.
Code acts as sample code to show the author's
design and coding style.
Generally:
This program is designed to survive:
Everything you need is in a single source file.
It compiles cleanly using a vanilla ANSI C compiler.
It does its job correctly with a minimum of fuss.
The code is not overly clever, not overly simplistic
and not overly verbose.
Access is 'cut and paste' from a web page.
Terms of use are reasonable.
VALIDATION: Non-trivial code is never without errors. This
file likely has some problems, since it has only
been tested by the author. It is expected with most
source code that there is a period of 'burn-in' when
problems are identified and corrected. That being
said, it is possible to have 'reasonably correct'
code by following a regime of unit test that covers
the most likely cases and regression testing prior
to release. This has been done with this code and
it has a good probability of performing as expected.
Unit Test Cases:
case 0:empty file:
CASE0.DAT -> ->
(Zero length target file created
on both encode and decode.)
case 1:One input character:
CASE1.DAT A -> QQ== -> A
case 2:Two input characters:
CASE2.DAT AB -> QUJD -> AB
case 3:Three input characters:
CASE3.DAT ABC -> QUJD -> ABC
case 4:Four input characters:
case4.dat ABCD -> QUJDRA== -> ABCD
case 5:All chars from 0 to ff, linesize set to 50:
AAECAwQFBgcICQoLDA0ODxAREhMUFRYXGBkaGxwdHh8gISIj
JCUmJygpKissLS4vMDEyMzQ1Njc4OTo7PD0+P0BBQkNERUZH
SElKS0xNTk9QUVJTVFVWV1hZWltcXV5fYGFiY2RlZmdoaWpr
bG1ub3BxcnN0dXZ3eHl6e3x9fn+AgYKDhIWGh4iJiouMjY6P
kJGSk5SVlpeYmZqbnJ2en6ChoqOkpaanqKmqq6ytrq+wsbKz
tLW2t7i5uru8vb6/wMHCw8TFxsfIycrLzM3Oz9DR0tPU1dbX
2Nna29zd3t/g4eLj5OXm5+jp6uvs7e7v8PHy8/T19vf4+fr7
/P3+/w==
case 6:Mime Block from e-mail:
(Data same as test case 5)
case 7: Large files:
Tested 28 MB file in/out.
case 8: Random Binary Integrity:
This binary program (b64.exe) was encoded to base64,
back to binary and then executed.
case 9 Stress:
All files in a working directory encoded/decoded
and compared with file comparison utility to
ensure that multiple runs do not cause problems
such as exhausting file handles, tmp storage, etc.
-------------
Syntax, operation and failure:
All options/switches tested. Performs as
expected.
case 10:
No Args -- Shows Usage Screen
Return Code 1 (Invalid Syntax)
case 11:
One Arg (invalid) -- Shows Usage Screen
Return Code 1 (Invalid Syntax)
case 12:
One Arg Help (-?) -- Shows detailed Usage Screen.
Return Code 0 (Success -- help request is valid).
case 13:
One Arg Help (-h) -- Shows detailed Usage Screen.
Return Code 0 (Success -- help request is valid).
case 14:
One Arg (valid) -- Uses stdin/stdout (filter)
Return Code 0 (Sucess)
case 15:
Two Args (invalid file) -- shows system error.
Return Code 2 (File Error)
case 16:
Encode non-existent file -- shows system error.
Return Code 2 (File Error)
case 17:
Out of disk space -- shows system error.
Return Code 3 (File I/O Error)
-------------
Compile/Regression test:
gcc compiled binary under Cygwin
Microsoft Visual Studio under Windows 2000
Microsoft Version 6.0 C under Windows 2000
DEPENDENCIES: None
LICENCE: Copyright (c) 2001 Bob Trower, Trantor Standard Systems Inc.
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated
documentation files (the "Software"), to deal in the
Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so,
subject to the following conditions:
The above copyright notice and this permission notice shall
be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
VERSION HISTORY:
Bob Trower 08/04/01 -- Create Version 0.00.00B
LAST MODIFIED: cheungmine@gmail.com 2009-08-17
\******************************************************************* */
#include <stdio.h>
#include <stdlib.h>
#define B64_DEF_LINE_SIZE 72
#define B64_MIN_LINE_SIZE 4
/*
** Translation Table as described in RFC1113
*/
static const char cb64[]="ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
/*
** Translation Table to decode (created by author)
*/
static const char cd64[]="|$$$}rstuvwxyz{$$$$$$$>?@ABCDEFGHIJKLMNOPQRSTUVW$$$$$$XYZ[\\]^_`abcdefghijklmnopq";
/*
** encodeblock
**
** encode 3 8-bit binary bytes as 4 '6-bit' characters
*/
static void encodeblock( unsigned char in[3], unsigned char out[4], int len )
{
out[0] = cb64[ in[0] >> 2 ];
out[1] = cb64[ ((in[0] & 0x03) << 4) | ((in[1] & 0xf0) >> 4) ];
out[2] = (unsigned char) (len > 1 ? cb64[ ((in[1] & 0x0f) << 2) | ((in[2] & 0xc0) >> 6) ] : '=');
out[3] = (unsigned char) (len > 2 ? cb64[ in[2] & 0x3f ] : '=');
}
/*
** encode
**
** base64 encode a stream adding padding and line breaks as per spec.
*/
static void b64_encode_stream( FILE *infile, FILE *outfile, int linesize )
{
unsigned char in[3], out[4];
int i, len, blocksout = 0;
while( !feof( infile ) ) {
len = 0;
for( i = 0; i < 3; i++ ) {
in[i] = (unsigned char) getc( infile );
if( !feof( infile ) ) {
len++;
}
else {
in[i] = 0;
}
}
if( len ) {
encodeblock( in, out, len );
for( i = 0; i < 4; i++ ) {
putc( out[i], outfile );
}
blocksout++;
}
if( blocksout >= (linesize/4) || feof( infile ) ) {
if( blocksout ) {
fprintf( outfile, "\r\n" );
}
blocksout = 0;
}
}
}
/*
** encode
**
** base64 encode bytes
** by cheungmine
** outstr is allocated by caller
** length of encoded string is returned (not including end closing '\0')
*/
static int b64_encode_string( const unsigned char *instr, int inlen, unsigned char* outstr )
{
unsigned char in[3], out[4];
int inc=0, outc=0, i, len;
/* only size of buffer required */
if (!outstr){
while( inc < inlen ) {
len = 0;
for( i = 0; i < 3; i++ ) {
if( inc++<inlen ){
len++;
}
}
if( len ) {
outc += 4;
}
}
return outc;
}
assert(outstr);
while( inc < inlen ) {
len = 0;
for( i = 0; i < 3; i++ ) {
in[i] = instr[inc];
if( inc++<inlen ){
len++;
}
else {
in[i] = 0;
}
}
if( len ) {
encodeblock( in, out, len );
for( i = 0; i < 4; i++ ) {
outstr[outc++] = out[i];
}
}
}
return outc;
}
/*
** decodeblock
**
** decode 4 '6-bit' characters into 3 8-bit binary bytes
*/
static void decodeblock( unsigned char in[4], unsigned char out[3] )
{
out[ 0 ] = (unsigned char ) (in[0] << 2 | in[1] >> 4);
out[ 1 ] = (unsigned char ) (in[1] << 4 | in[2] >> 2);
out[ 2 ] = (unsigned char ) (((in[2] << 6) & 0xc0) | in[3]);
}
/*
** decode
**
** decode a base64 encoded stream discarding padding, line breaks and noise
*/
static void b64_decode_stream( FILE *infile, FILE *outfile )
{
unsigned char in[4], out[3], v;
int i, len;
while( !feof( infile ) ) {
for( len = 0, i = 0; i < 4 && !feof( infile ); i++ ) {
v = 0;
while( !feof( infile ) && v == 0 ) {
v = (unsigned char) getc( infile );
v = (unsigned char) ((v < 43 || v > 122) ? 0 : cd64[ v - 43 ]);
if( v ) {
v = (unsigned char) ((v == '$') ? 0 : v - 61);
}
}
if( !feof( infile ) ) {
len++;
if( v ) {
in[ i ] = (unsigned char) (v - 1);
}
}
else {
in[i] = 0;
}
}
if( len ) {
decodeblock( in, out );
for( i = 0; i < len - 1; i++ ) {
putc( out[i], outfile );
}
}
}
}
/*
* add by cheungmine
*/
static int b64_decode_string( const unsigned char *instr, int inlen, unsigned char *outstr )
{
unsigned char in[4], out[3], v;
int inc=0, outc=0, i, len;
/* only size of buffer required */
if (!outstr){
while( inc < inlen ) {
for( len = 0, i = 0; i < 4 && inc<inlen; i++ ) {
v = 0;
while( (inc<inlen) && (v==0) ) {
v = instr[inc++];
v = (unsigned char) ((v < 43 || v > 122) ? 0 : cd64[ v - 43 ]);
if( v ) {
v = (unsigned char) ((v == '$') ? 0 : v - 61);
}
}
if( inc<inlen ) {
len++;
}
}
if( len>1 ) {
outc += (len-1);
}
}
return outc;
}
assert(outstr);
while( inc < inlen ) {
for( len = 0, i = 0; i < 4 && inc<inlen; i++ ) {
v = 0;
while( (inc<inlen) && (v==0) ) {
v = instr[inc++];
v = (unsigned char) ((v < 43 || v > 122) ? 0 : cd64[ v - 43 ]);
if( v ) {
v = (unsigned char) ((v == '$') ? 0 : v - 61);
}
}
if( inc<inlen ) {
len++;
if( v ) {
in[ i ] = (unsigned char) (v - 1);
}
}
else {
in[i] = 0;
}
}
if( len ) {
decodeblock( in, out );
for( i = 0; i < len - 1; i++ ) {
outstr[outc++] = out[i];
}
}
}
return outc;
}
/*
** returnable errors
**
** Error codes returned to the operating system.
**
*/
#define B64_SYNTAX_ERROR 1
#define B64_FILE_ERROR 2
#define B64_FILE_IO_ERROR 3
#define B64_ERROR_OUT_CLOSE 4
#define B64_LINE_SIZE_TO_MIN 5
/*
** b64_message
**
** Gather text messages in one place.
**
*/
static char *b64_message( int errcode )
{
#define B64_MAX_MESSAGES 6
char *msgs[ B64_MAX_MESSAGES ] = {
"b64:000:Invalid Message Code.",
"b64:001:Syntax Error -- check help for usage.",
"b64:002:File Error Opening/Creating Files.",
"b64:003:File I/O Error -- Note: output file not removed.",
"b64:004:Error on output file close.",
"b64:004:linesize set to minimum."
};
char *msg = msgs[ 0 ];
if( errcode > 0 && errcode < B64_MAX_MESSAGES ) {
msg = msgs[ errcode ];
}
return( msg );
}
/*
* Example by cheungmine
*
int main()
{
int size_out;
int size_ret;
char *b64_out;
char *b64_outB;
char b64_in[] = "hello world shanghai";
// Base64 编码字符串
size_out = b64_encode_string((const unsigned char*)b64_in, (int)strlen(b64_in), 0);
b64_out = (char*) malloc(size_out+1);
size_ret = b64_encode_string((const unsigned char*)b64_in, (int)strlen(b64_in), (unsigned char*)b64_out);
b64_out[size_ret] = 0;
assert(size_ret==size_out);
// Base64 解码字符串
size_out = b64_decode_string((const unsigned char*)b64_out, size_ret, 0);
b64_outB = (char*) malloc(size_out+1);
size_ret = b64_decode_string((const unsigned char*)b64_out, size_ret, (unsigned char*)b64_outB);
b64_outB[size_ret] = 0;
assert(size_ret==size_out);
assert(strcmp(b64_outB, b64_in)==0);
free(b64_out);
free(b64_outB);
return 0;
}
*/
本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/cheungmine/archive/2009/08/17/4455375.aspx
MODULE NAME: b64
AUTHOR: Bob Trower 08/04/01
PROJECT: Crypt Data Packaging
COPYRIGHT: Copyright (c) Trantor Standard Systems Inc., 2001
NOTE: This source code may be used as you wish, subject to
the MIT license. See the LICENCE section below.
DESCRIPTION:
This little utility implements the Base64
Content-Transfer-Encoding standard described in
RFC1113 (http://www.faqs.org/rfcs/rfc1113.html).
This is the coding scheme used by MIME to allow
binary data to be transferred by SMTP mail.
Groups of 3 bytes from a binary stream are coded as
groups of 4 bytes in a text stream.
The input stream is 'padded' with zeros to create
an input that is an even multiple of 3.
A special character ('=') is used to denote padding so
that the stream can be decoded back to its exact size.
Encoded output is formatted in lines which should
be a maximum of 72 characters to conform to the
specification. This program defaults to 72 characters,
but will allow more or less through the use of a
switch. The program enforces a minimum line size
of 4 characters.
Example encoding:
The stream 'ABCD' is 32 bits long. It is mapped as
follows:
ABCD
A (65) B (66) C (67) D (68) (None) (None)
01000001 01000010 01000011 01000100
16 (Q) 20 (U) 9 (J) 3 (D) 17 (R) 0 (A) NA (=) NA (=)
010000 010100 001001 000011 010001 000000 000000 000000
QUJDRA==
Decoding is the process in reverse. A 'decode' lookup
table has been created to avoid string scans.
DESIGN GOALS: Specifically:
Code is a stand-alone utility to perform base64
encoding/decoding. It should be genuinely useful
when the need arises and it meets a need that is
likely to occur for some users.
Code acts as sample code to show the author's
design and coding style.
Generally:
This program is designed to survive:
Everything you need is in a single source file.
It compiles cleanly using a vanilla ANSI C compiler.
It does its job correctly with a minimum of fuss.
The code is not overly clever, not overly simplistic
and not overly verbose.
Access is 'cut and paste' from a web page.
Terms of use are reasonable.
VALIDATION: Non-trivial code is never without errors. This
file likely has some problems, since it has only
been tested by the author. It is expected with most
source code that there is a period of 'burn-in' when
problems are identified and corrected. That being
said, it is possible to have 'reasonably correct'
code by following a regime of unit test that covers
the most likely cases and regression testing prior
to release. This has been done with this code and
it has a good probability of performing as expected.
Unit Test Cases:
case 0:empty file:
CASE0.DAT -> ->
(Zero length target file created
on both encode and decode.)
case 1:One input character:
CASE1.DAT A -> QQ== -> A
case 2:Two input characters:
CASE2.DAT AB -> QUJD -> AB
case 3:Three input characters:
CASE3.DAT ABC -> QUJD -> ABC
case 4:Four input characters:
case4.dat ABCD -> QUJDRA== -> ABCD
case 5:All chars from 0 to ff, linesize set to 50:
AAECAwQFBgcICQoLDA0ODxAREhMUFRYXGBkaGxwdHh8gISIj
JCUmJygpKissLS4vMDEyMzQ1Njc4OTo7PD0+P0BBQkNERUZH
SElKS0xNTk9QUVJTVFVWV1hZWltcXV5fYGFiY2RlZmdoaWpr
bG1ub3BxcnN0dXZ3eHl6e3x9fn+AgYKDhIWGh4iJiouMjY6P
kJGSk5SVlpeYmZqbnJ2en6ChoqOkpaanqKmqq6ytrq+wsbKz
tLW2t7i5uru8vb6/wMHCw8TFxsfIycrLzM3Oz9DR0tPU1dbX
2Nna29zd3t/g4eLj5OXm5+jp6uvs7e7v8PHy8/T19vf4+fr7
/P3+/w==
case 6:Mime Block from e-mail:
(Data same as test case 5)
case 7: Large files:
Tested 28 MB file in/out.
case 8: Random Binary Integrity:
This binary program (b64.exe) was encoded to base64,
back to binary and then executed.
case 9 Stress:
All files in a working directory encoded/decoded
and compared with file comparison utility to
ensure that multiple runs do not cause problems
such as exhausting file handles, tmp storage, etc.
-------------
Syntax, operation and failure:
All options/switches tested. Performs as
expected.
case 10:
No Args -- Shows Usage Screen
Return Code 1 (Invalid Syntax)
case 11:
One Arg (invalid) -- Shows Usage Screen
Return Code 1 (Invalid Syntax)
case 12:
One Arg Help (-?) -- Shows detailed Usage Screen.
Return Code 0 (Success -- help request is valid).
case 13:
One Arg Help (-h) -- Shows detailed Usage Screen.
Return Code 0 (Success -- help request is valid).
case 14:
One Arg (valid) -- Uses stdin/stdout (filter)
Return Code 0 (Sucess)
case 15:
Two Args (invalid file) -- shows system error.
Return Code 2 (File Error)
case 16:
Encode non-existent file -- shows system error.
Return Code 2 (File Error)
case 17:
Out of disk space -- shows system error.
Return Code 3 (File I/O Error)
-------------
Compile/Regression test:
gcc compiled binary under Cygwin
Microsoft Visual Studio under Windows 2000
Microsoft Version 6.0 C under Windows 2000
DEPENDENCIES: None
LICENCE: Copyright (c) 2001 Bob Trower, Trantor Standard Systems Inc.
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated
documentation files (the "Software"), to deal in the
Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so,
subject to the following conditions:
The above copyright notice and this permission notice shall
be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
VERSION HISTORY:
Bob Trower 08/04/01 -- Create Version 0.00.00B
LAST MODIFIED: cheungmine@gmail.com 2009-08-17
\******************************************************************* */
#include <stdio.h>
#include <stdlib.h>
#define B64_DEF_LINE_SIZE 72
#define B64_MIN_LINE_SIZE 4
/*
** Translation Table as described in RFC1113
*/
static const char cb64[]="ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
/*
** Translation Table to decode (created by author)
*/
static const char cd64[]="|$$$}rstuvwxyz{$$$$$$$>?@ABCDEFGHIJKLMNOPQRSTUVW$$$$$$XYZ[\\]^_`abcdefghijklmnopq";
/*
** encodeblock
**
** encode 3 8-bit binary bytes as 4 '6-bit' characters
*/
static void encodeblock( unsigned char in[3], unsigned char out[4], int len )
{
out[0] = cb64[ in[0] >> 2 ];
out[1] = cb64[ ((in[0] & 0x03) << 4) | ((in[1] & 0xf0) >> 4) ];
out[2] = (unsigned char) (len > 1 ? cb64[ ((in[1] & 0x0f) << 2) | ((in[2] & 0xc0) >> 6) ] : '=');
out[3] = (unsigned char) (len > 2 ? cb64[ in[2] & 0x3f ] : '=');
}
/*
** encode
**
** base64 encode a stream adding padding and line breaks as per spec.
*/
static void b64_encode_stream( FILE *infile, FILE *outfile, int linesize )
{
unsigned char in[3], out[4];
int i, len, blocksout = 0;
while( !feof( infile ) ) {
len = 0;
for( i = 0; i < 3; i++ ) {
in[i] = (unsigned char) getc( infile );
if( !feof( infile ) ) {
len++;
}
else {
in[i] = 0;
}
}
if( len ) {
encodeblock( in, out, len );
for( i = 0; i < 4; i++ ) {
putc( out[i], outfile );
}
blocksout++;
}
if( blocksout >= (linesize/4) || feof( infile ) ) {
if( blocksout ) {
fprintf( outfile, "\r\n" );
}
blocksout = 0;
}
}
}
/*
** encode
**
** base64 encode bytes
** by cheungmine
** outstr is allocated by caller
** length of encoded string is returned (not including end closing '\0')
*/
static int b64_encode_string( const unsigned char *instr, int inlen, unsigned char* outstr )
{
unsigned char in[3], out[4];
int inc=0, outc=0, i, len;
/* only size of buffer required */
if (!outstr){
while( inc < inlen ) {
len = 0;
for( i = 0; i < 3; i++ ) {
if( inc++<inlen ){
len++;
}
}
if( len ) {
outc += 4;
}
}
return outc;
}
assert(outstr);
while( inc < inlen ) {
len = 0;
for( i = 0; i < 3; i++ ) {
in[i] = instr[inc];
if( inc++<inlen ){
len++;
}
else {
in[i] = 0;
}
}
if( len ) {
encodeblock( in, out, len );
for( i = 0; i < 4; i++ ) {
outstr[outc++] = out[i];
}
}
}
return outc;
}
/*
** decodeblock
**
** decode 4 '6-bit' characters into 3 8-bit binary bytes
*/
static void decodeblock( unsigned char in[4], unsigned char out[3] )
{
out[ 0 ] = (unsigned char ) (in[0] << 2 | in[1] >> 4);
out[ 1 ] = (unsigned char ) (in[1] << 4 | in[2] >> 2);
out[ 2 ] = (unsigned char ) (((in[2] << 6) & 0xc0) | in[3]);
}
/*
** decode
**
** decode a base64 encoded stream discarding padding, line breaks and noise
*/
static void b64_decode_stream( FILE *infile, FILE *outfile )
{
unsigned char in[4], out[3], v;
int i, len;
while( !feof( infile ) ) {
for( len = 0, i = 0; i < 4 && !feof( infile ); i++ ) {
v = 0;
while( !feof( infile ) && v == 0 ) {
v = (unsigned char) getc( infile );
v = (unsigned char) ((v < 43 || v > 122) ? 0 : cd64[ v - 43 ]);
if( v ) {
v = (unsigned char) ((v == '$') ? 0 : v - 61);
}
}
if( !feof( infile ) ) {
len++;
if( v ) {
in[ i ] = (unsigned char) (v - 1);
}
}
else {
in[i] = 0;
}
}
if( len ) {
decodeblock( in, out );
for( i = 0; i < len - 1; i++ ) {
putc( out[i], outfile );
}
}
}
}
/*
* add by cheungmine
*/
static int b64_decode_string( const unsigned char *instr, int inlen, unsigned char *outstr )
{
unsigned char in[4], out[3], v;
int inc=0, outc=0, i, len;
/* only size of buffer required */
if (!outstr){
while( inc < inlen ) {
for( len = 0, i = 0; i < 4 && inc<inlen; i++ ) {
v = 0;
while( (inc<inlen) && (v==0) ) {
v = instr[inc++];
v = (unsigned char) ((v < 43 || v > 122) ? 0 : cd64[ v - 43 ]);
if( v ) {
v = (unsigned char) ((v == '$') ? 0 : v - 61);
}
}
if( inc<inlen ) {
len++;
}
}
if( len>1 ) {
outc += (len-1);
}
}
return outc;
}
assert(outstr);
while( inc < inlen ) {
for( len = 0, i = 0; i < 4 && inc<inlen; i++ ) {
v = 0;
while( (inc<inlen) && (v==0) ) {
v = instr[inc++];
v = (unsigned char) ((v < 43 || v > 122) ? 0 : cd64[ v - 43 ]);
if( v ) {
v = (unsigned char) ((v == '$') ? 0 : v - 61);
}
}
if( inc<inlen ) {
len++;
if( v ) {
in[ i ] = (unsigned char) (v - 1);
}
}
else {
in[i] = 0;
}
}
if( len ) {
decodeblock( in, out );
for( i = 0; i < len - 1; i++ ) {
outstr[outc++] = out[i];
}
}
}
return outc;
}
/*
** returnable errors
**
** Error codes returned to the operating system.
**
*/
#define B64_SYNTAX_ERROR 1
#define B64_FILE_ERROR 2
#define B64_FILE_IO_ERROR 3
#define B64_ERROR_OUT_CLOSE 4
#define B64_LINE_SIZE_TO_MIN 5
/*
** b64_message
**
** Gather text messages in one place.
**
*/
static char *b64_message( int errcode )
{
#define B64_MAX_MESSAGES 6
char *msgs[ B64_MAX_MESSAGES ] = {
"b64:000:Invalid Message Code.",
"b64:001:Syntax Error -- check help for usage.",
"b64:002:File Error Opening/Creating Files.",
"b64:003:File I/O Error -- Note: output file not removed.",
"b64:004:Error on output file close.",
"b64:004:linesize set to minimum."
};
char *msg = msgs[ 0 ];
if( errcode > 0 && errcode < B64_MAX_MESSAGES ) {
msg = msgs[ errcode ];
}
return( msg );
}
/*
* Example by cheungmine
*
int main()
{
int size_out;
int size_ret;
char *b64_out;
char *b64_outB;
char b64_in[] = "hello world shanghai";
// Base64 编码字符串
size_out = b64_encode_string((const unsigned char*)b64_in, (int)strlen(b64_in), 0);
b64_out = (char*) malloc(size_out+1);
size_ret = b64_encode_string((const unsigned char*)b64_in, (int)strlen(b64_in), (unsigned char*)b64_out);
b64_out[size_ret] = 0;
assert(size_ret==size_out);
// Base64 解码字符串
size_out = b64_decode_string((const unsigned char*)b64_out, size_ret, 0);
b64_outB = (char*) malloc(size_out+1);
size_ret = b64_decode_string((const unsigned char*)b64_out, size_ret, (unsigned char*)b64_outB);
b64_outB[size_ret] = 0;
assert(size_ret==size_out);
assert(strcmp(b64_outB, b64_in)==0);
free(b64_out);
free(b64_outB);
return 0;
}
*/
本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/cheungmine/archive/2009/08/17/4455375.aspx
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- base 64 编解码
- 64BASE编解码(转载)
- iOS 自带的base64 编码与解码
- UrlEncode以及Base-64编解码简介
- 64BASE编解码(转载)
- C# base 64图片编码解码
- 图片 base 64 的编码与解码
- 用js编解码base64
- 文本文件BASE-64编码解码
- [VB.NET]MD5/SHA1/Base64
- C# Base 64 编码/解码实现代码
- base-64 字符数组的无效长度
- Java中的BASE64
- Cannot find a valid baseurl for repo: base/7/x86_64
- Base64
- 四十三 常用内建模块 base64
- vs2013 上传碰到的问题：“输入的不是有效的 Base-64 字符串 ”
- MP3解码之DCT(32→64)快速算法的展开
- base-122编码，比base-64更加高效
- BASE64