CME/CUE实验之二: CUE安装

CME/CUE实验之二: CUE安装
实验设备
RT2610XM: Cisco 2610XM 32M Flash/128M DRAM
RT2610XM IOS:c2600-ipvoicek9-mz.124-15.T9.bin
CUE on RT2610XM: NM-CUE

安装准备工作
1.检查/准备CME的配置
a.尝试打开CME的GUI网页
http://192.168.2.1/ccme.html
b.在RT2610XM上执行show flash: 或dir flash:
以下文件应该存在于系统的闪存上：
· CiscoLogo.gif
· Delete.gif
· Plus.gif
· Tab.gif
· admin_user.html
· admin_user.js
· dom.js
· downarrow.gif
· ephone_admin.html
· logohome.gif
· normal_user.html
· normal_user.js
· sxiconad.gif
· telephony_service.html
· uparrow.gif
· xml-test.html
· xml.template
c.在RT2610XM上执行show running-config
以下或类似的配置应该存在：
ip http server
ip http path flash:
telephony-service
web admin system name <username> password <password>
or
web admin system name <username> secret 5 <encrypted-password>
2.配置/检查CME 和CUE之间的IP连接
在RT2610XM上执行show ip interface brief 或show running-config, 找到service-engine 接口号,然后配置service-engine接口:
interface service-engine 1/0
ip unnumbered FastEthernet 0/0.20
service-module ip address 192.168.2.10 255.255.255.0
service-module ip default-gateway 192.168.2.1
no shutdown
配置到service-module(CUE)的路由:
ip route 192.168.2.10 255.255.255.255 service-engine 1/0
从RT2610XM上ping CUE
从TFTP/FTP Servier 上ping CUE
登录到CUE:
service-module service-engine 1/0 session
如果提示输入用户名和密码，输入之
忘记或不知道用户名和密码，请参照《CME/CUE系列
之三– CUE密码恢复》
从CUE上ping RT2610XM
从CUE上ping TFTP/FTP Server
3.检查CME版本
a.在CME的GUI网页上选择help -> about
b.RT2610XM上执行show telephony-service
4.下载CUE软件包
参照以下网页上的table 1 选择与CME 兼容的CUE版本：
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm
从Cisco Download Center 下载相应的CUE软件包(需要CCO帐号)：
http://www.cisco.com/public/sw-center/index.shtml
主软件包
cue-vm-k9.nm-aim.7.0.3.zip
语言包
cue-vm-en_US-langpack.nm-aim.7.0.3.prt1
cue-vm-zh_CN-langpack.nm-aim.7.0.3.prt1
License 包
cue-vm-license_50mbx_cme_7.0.3.pkg
cue-vm-license_4port_ivr_7.0.3.pkg
5.安装文件准备
解压缩主软件包
将cue-installer.nm-aim.7.0.3 拷贝到TFTP Server 上的TFTP根目录下
将所有其它文件拷贝到FTP Server上，比如FTP根目录下的cue-7.0.3子目录下
++++++++++++++++++++++++++++++++++++++++
使用boothelper安装方式
1. 登录到CUE:
service-module service-engine 1/0 session
如果提示输入用户名和密码，输入之
忘记或不知道用户名和密码，请参照《CME/CUE系列之三– CUE密码恢复》
2. 重载系统，进入boot-loader模式:
se-192-168-2-10> reload
Are you sure you want to reload?
Doing a reload will cause any unsaved configuration data to be lost.
Continue[y]? : <enter>
......
Please enter '***' to change boot configuration: ***
3. 配置boot-loader参数：
ServicesEngine boot-loader> config
IP Address [10.229.77.5] >192.168.2.10
Subnet mask [255.255.255.0] > <enter>
TFTP server [10.194.84.55] >192.168.2.12
Gateway [10.229.77.1] >192.168.2.1
Default Helper-file [cue-installer.1.1.2] >cue-installer.nm-aim.7.0.3
Ethernet interface [internal] > <enter>
Default Boot [disk] ><enter>
Default bootloader [primary|secondary] [secondary] >primary
Updating flash with bootloader configuration
4. 使用boot-helper模式重启系统：
ServicesEngine boot-loader>boot helper
......
5. 开始安装软件
Please select from the following
1 Install software
2 Reload module
3 Disk cleanup
(Type '?' at any time for help)
Choice: Choice: 1
Package name: cue-vm-k9.nm-aim.7.0.3.pkg
Server url: ftp://192.168.2.11/cue-7.0.3/
Username: Anonymous
Password: <password>
......
WARNING:: Software installation will clear disk contents
Continue
? y
......
6. 选择要安装的语言包
输入所列可选语言前面的编号选择要安装的语言包，输入x 结束选择
......
7. 初始化配置
Do you wish to start configuration now (y,n)? y
Are you sure (y,n)? y
......
Would you like to restore the saved configuration? (y,n) n
......
(注：如果想保留原有配置，输入y)
Enter Hostname
(my-hostname, or enter to use se-192-168-2-10): <enter>
Enter Domain Name
(mydomain.com, or enter to use localdomain): <enter>
Using localdomain as default
......
Would you like to use DNS (y,n)?y
Enter IP Address of the Primary DNS Server
(IP address): 4.2.2.2
Found server 4.2.2.2
Enter IP Address of the Secondary DNS Server (other than Primary)
(IP address, or enter to bypass): <enter>
Enter Fully Qualified Domain Name(FQDN: e.g. myhost.mydomain.com)
or IP address of the Primary NTP server
(FQDN or IP address, or enter for 192.168.2.1): 10.10.10.2
Found server 10.10.10.2
Enter Fully Qualified Domain Name(FQDN: e.g. myhost.mydomain.com)
or IP address of the Secondary NTP Server
(FQDN or IP address, or enter to bypass): <enter>
输入所列大陆/洋前面的编号选择所在大陆/洋
输入所列国家前面的编号选择所在国家
输入所列时区前面的编号选择所在时区
(Summary of selections)
Is the above information OK?
1) Yes
2) No
#? 1
......
(此处需要等待时间比较长)
8. 创建管理员帐户
Enter administrator user ID:
(user ID): admin
Enter password for admin:
(password): <password>
Confirm password for admin by reentering it:
(password): <password>
9. 安装成功，恭喜!!!
SYSTEM ONLINE
se-192-168-2-10>
+++++++++++++++++++++++++++++++++++
Clean 安装方式
1. 登录到CUE:
service-module service-engine 1/0 session
如果提示输入用户名和密码，输入之
忘记或不知道用户名和密码，请参照《CME/CUE系列之三– CUE密码恢复》
2. 从FTP Server 上下载安装包(可选)
se-192-168-2-10>Software download clean url ftp://192.168.2.11/cue-7.0.3/cue-vm-k9.nm-aim.7.0.3.pkg username Anonymous password <password>
3. 检查下载状态
se-192-168-2-10>Software download status
4. 安装
Software install clean cue-vm-k9.nm-aim.7.0.3.pkg

升级安装方式
1. 登录到CUE:
service-module service-engine 1/0 session
如果提示输入用户名和密码，输入之
忘记或不知道用户名和密码，请参照《CME/CUE系列之三– CUE密码恢复》
2. 从FTP Server 上下载安装包(可选)
se-192-168-2-10>Software download clean url ftp://192.168.2.11/cue-7.0.3/cue-vm-k9.nm-aim.7.0.3.pkg username Anonymous password <password>
3. 检查下载状态
se-192-168-2-10>Software download status
4. 安装
Software install upgrade cue-vm-k9.nm-aim.7.0.3.pkg
安装Licenses
se-192-168-2-10>software install clean url ftp://192.168.2.12/cue-7.0.3/cue-vm-license_50mbx_cme_7.0.3.pkg username Anonymous password <password>
se-192-168-2-10>software install clean url ftp://192.168.2.12/cue-7.0.3/cue-vm-license_4port_ivr_7.0.3.pkg username Anonymous password <password>