AIX 安装 RAC 无法发现节点(再续)
2014-02-26 14:41
369 查看
AIX 安装 RAC 无法发现节点(再续)
在节点上运行root.sh 时,出现以下错误:
[root@aix213 /]#/u01/crs_1/root.sh
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default private interconnect name aix213 for node 1.
assigning default private interconnect name aix214 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: aix213 aix213 aix213
node 2: aix214 aix214 aix214
clscfg: Arguments check out successfully.
----这里主机显示应该是:(节点名 私有ip节点名 主机名)
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
aix213
CSS is inactive on these nodes.
aix214
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons
修改root.sh 配置文件:
[root@aix213 /]#vi /u01/crs_1/install/rootconfig
"/u01/crs_1/install/rootconfig" [Read only] 1013 lines, 32409 characters
#!/bin/sh
#
# rootconfig.sh for Oracle CRS homes
#
# This is run once per node during the Oracle CRS install.
# This script does the following:
# 1) Stop if any GSDs are running from 9.x oracle homes
# 2) Initialize new OCR device or upgrade the existing OCR device
# 3) Setup OCR for running CRS stack
# 4) Copy the CRS init script to init.d for init process to start
# 5) Start the CRS stack
# 6) Configure NodeApps if CRS is up and running on all nodes
#
# NOTE: Use sample paramfile in $ORA_CRS_HOME/srvm/admin/paramfile.sample for
# setting CRS parameters
# The following commands need to be run before Oracle Cluster Registry is
# populated.
# This is run during CRS installation and not during RAC
#!/bin/sh
#
# rootconfig.sh for Oracle CRS homes
#
# This is run once per node during the Oracle CRS install.
# This script does the following:
# 1) Stop if any GSDs are running from 9.x oracle homes
# 2) Initialize new OCR device or upgrade the existing OCR device
# 3) Setup OCR for running CRS stack
# 4) Copy the CRS init script to init.d for init process to start
# 5) Start the CRS stack
# 6) Configure NodeApps if CRS is up and running on all nodes
#
# NOTE: Use sample paramfile in $ORA_CRS_HOME/srvm/admin/paramfile.sample for
# setting CRS parameters
# The following commands need to be run before Oracle Cluster Registry is
# populated.
# This is run during CRS installation and not during RAC
SILENT=false
ORA_CRS_HOME=/u01/crs_1
CRS_ORACLE_OWNER=oracle
CRS_DBA_GROUP=oinstall
CRS_VNDR_CLUSTER=true
CRS_OCR_LOCATIONS=/dev/rrac_ocr
CRS_CLUSTER_NAME=crs
CRS_HOST_NAME_LIST=aix213,1,aix214,2
CRS_NODE_NAME_LIST=aix213,1,aix214,2
CRS_PRIVATE_NAME_LIST=aix213-priv,,aix214-priv,
----这里出现错误
应该改为:
CRS_PRIVATE_NAME_LIST=aix213-priv,1,aix214-priv, 2
CRS_LANGUAGE_ID='AMERICAN_AMERICA.WE8ISO8859P1'
CRS_VOTING_DISKS=/dev/rrac_vote
CRS_NODELIST=aix213,aix214
CRS_NODEVIPS='aix213/aix213-vip/255.255.255.0/en0,aix214/aix214-vip/255.255.255.0/en0'
修改后,重新运行root.sh
[root@aix213 /]#/u01/crs_1/root.sh
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: aix213 aix213-priv aix213
node 2: aix214 aix214-priv aix214
----显示正常
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
aix213
CSS is inactive on these nodes.
aix214
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
[root@aix213 /]#
本文出自 “天涯客的blog” 博客,请务必保留此出处http://tiany.blog.51cto.com/513694/1363776
在节点上运行root.sh 时,出现以下错误:
[root@aix213 /]#/u01/crs_1/root.sh
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default private interconnect name aix213 for node 1.
assigning default private interconnect name aix214 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: aix213 aix213 aix213
node 2: aix214 aix214 aix214
clscfg: Arguments check out successfully.
----这里主机显示应该是:(节点名 私有ip节点名 主机名)
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
aix213
CSS is inactive on these nodes.
aix214
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons
修改root.sh 配置文件:
[root@aix213 /]#vi /u01/crs_1/install/rootconfig
"/u01/crs_1/install/rootconfig" [Read only] 1013 lines, 32409 characters
#!/bin/sh
#
# rootconfig.sh for Oracle CRS homes
#
# This is run once per node during the Oracle CRS install.
# This script does the following:
# 1) Stop if any GSDs are running from 9.x oracle homes
# 2) Initialize new OCR device or upgrade the existing OCR device
# 3) Setup OCR for running CRS stack
# 4) Copy the CRS init script to init.d for init process to start
# 5) Start the CRS stack
# 6) Configure NodeApps if CRS is up and running on all nodes
#
# NOTE: Use sample paramfile in $ORA_CRS_HOME/srvm/admin/paramfile.sample for
# setting CRS parameters
# The following commands need to be run before Oracle Cluster Registry is
# populated.
# This is run during CRS installation and not during RAC
#!/bin/sh
#
# rootconfig.sh for Oracle CRS homes
#
# This is run once per node during the Oracle CRS install.
# This script does the following:
# 1) Stop if any GSDs are running from 9.x oracle homes
# 2) Initialize new OCR device or upgrade the existing OCR device
# 3) Setup OCR for running CRS stack
# 4) Copy the CRS init script to init.d for init process to start
# 5) Start the CRS stack
# 6) Configure NodeApps if CRS is up and running on all nodes
#
# NOTE: Use sample paramfile in $ORA_CRS_HOME/srvm/admin/paramfile.sample for
# setting CRS parameters
# The following commands need to be run before Oracle Cluster Registry is
# populated.
# This is run during CRS installation and not during RAC
SILENT=false
ORA_CRS_HOME=/u01/crs_1
CRS_ORACLE_OWNER=oracle
CRS_DBA_GROUP=oinstall
CRS_VNDR_CLUSTER=true
CRS_OCR_LOCATIONS=/dev/rrac_ocr
CRS_CLUSTER_NAME=crs
CRS_HOST_NAME_LIST=aix213,1,aix214,2
CRS_NODE_NAME_LIST=aix213,1,aix214,2
CRS_PRIVATE_NAME_LIST=aix213-priv,,aix214-priv,
----这里出现错误
应该改为:
CRS_PRIVATE_NAME_LIST=aix213-priv,1,aix214-priv, 2
CRS_LANGUAGE_ID='AMERICAN_AMERICA.WE8ISO8859P1'
CRS_VOTING_DISKS=/dev/rrac_vote
CRS_NODELIST=aix213,aix214
CRS_NODEVIPS='aix213/aix213-vip/255.255.255.0/en0,aix214/aix214-vip/255.255.255.0/en0'
修改后,重新运行root.sh
[root@aix213 /]#/u01/crs_1/root.sh
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: aix213 aix213-priv aix213
node 2: aix214 aix214-priv aix214
----显示正常
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
aix213
CSS is inactive on these nodes.
aix214
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
[root@aix213 /]#
本文出自 “天涯客的blog” 博客,请务必保留此出处http://tiany.blog.51cto.com/513694/1363776
相关文章推荐
- AIX 安装 RAC 无法发现节点(后遗症。。。)
- AIX 安装 RAC 无法发现节点
- AIX 安装 RAC 无法发现节点(后遗症。。。)
- AIX 安装 RAC 无法发现节点(再续)
- AIX 安装 RAC 无法发现节点
- AIX 安装 RAC 错误集锦(2)之--not public ip
- rac 11g_第二个节点重启后无法启动实例:磁盘组dismount问题
- 10g r2 rac for Aix5.3常见安装升级问题解决方法
- Oracle11gR2 RAC for Windows安装上篇:Grid Infrastructure + ASM 两节点安装 简要步骤及安装问题总结
- Oracle 11g RAC 安装数据库软件找不到节点的解决
- ElasticSearch集群未连接 无法发现节点(windows环境)以及windows环境下设置服务 不能自动启动的问题
- ORACLE 11.2.0.2 RAC on AIX 6.1 安装报错
- ubuntu安装时发现GPT分区表,无法安装问题
- RHRL7.0安装RAC11.2.0.4----ohasd服务无法启动
- oracle 11gr2 rac在aix5.3上的安装(简单记录)
- aix安装后无法使用串口登陆
- 【RAC】安装cluster软件 在节点2执行root.sh脚本
- AIX下RAC搭建 Oracle10G(三)hacmp安装并配置
- 单节点rac无法启动
- Linux6平台Oracle11g RAC 安装GI PSU后无法打开