回环网线制作--单个http://www.ortizonline.com/publications/april2004/loopback.htm网口故障测试
2014-02-24 19:51
357 查看
http://www.ortizonline.com/publications/april2004/loopback.htm
Step 2. Leave approximately 1/2 inch at end and start twisting, very tightly.
![](http://www.ortizonline.com/publications/april2004/begin-twisting.jpg)
Note: If your fingers start to hurt, you may want to use a tool to help with the twisting. Notice how tightly wound the cable is. If the twists are not close enough the loopback will not work. Please
twist to match picture.
![](http://www.ortizonline.com/publications/april2004/twist-with-tool.jpg)
Step 3. After twisting is done, fold cable and line up the ends. Cut if you must to line up cables. Line up the cables so that the cables are in the proper alignment to prepare for
insertion into RJ-45 end.
![](http://www.ortizonline.com/publications/april2004/zoom-in-to-cable.jpg)
![](http://www.ortizonline.com/publications/april2004/twistedandlinedup.jpg)
Step 4: Insert cable into RJ-45 end. (do not crimp yet.) Remember, 1236 pins.
![](http://www.ortizonline.com/publications/april2004/no-jacket.jpg)
Step 5. Insert plastic tubing over the wire and into the RJ-45 end. Now crimp the end with a crimping tool.
![](http://www.ortizonline.com/publications/april2004/completed-picture.jpg)
Note: When you first plug in the loopback cable, wait approximately 10 seconds to get a link light. No more carrying around a hub just to get a link light.
Enjoy!
By Efrain Ortiz
Loopback Cable
How do I create a loopback cable?
I have tested this cable only up to 100Mb. I do not know if this will work on a 1000Mb Nic. Use at your own risk.In our day to day jobs we find ourselves lugging around more and more hardware; pda, laptop, cell phone, and sometimes even hubs. Why do we carry a hub around when sometimes all we need is a link on our ethernet cards so that all the applications on the system work. Yes, yes, I know you could setup a loopback software adapter. But if you are looking to have the system configured as close to the real setup as possible and you don't want to carry a hub around, just to get a link light on your NIC. Consider building yourself a loopback cable. |
What is a loopback cable? A loopback cable redirects the output back into itself. This effectively gives the NIC the impression that it is communicating on a network, since its able to transmit and receive communications. How to build the loopback cable simplified? If you are handy with building ethernet cables, the simple explanation is; 1. Redirect Pin 1 to Pin 3 and Pin 2 to Pin 6. 2. Make sure you create tight twists to account for signal interference at such a short length. |
How to build a loopback cable illustrated? Step 1. Get a pair of approximately 4 inches in length of cat 5 cable. ![]() |
![](http://www.ortizonline.com/publications/april2004/begin-twisting.jpg)
Note: If your fingers start to hurt, you may want to use a tool to help with the twisting. Notice how tightly wound the cable is. If the twists are not close enough the loopback will not work. Please
twist to match picture.
![](http://www.ortizonline.com/publications/april2004/twist-with-tool.jpg)
Step 3. After twisting is done, fold cable and line up the ends. Cut if you must to line up cables. Line up the cables so that the cables are in the proper alignment to prepare for
insertion into RJ-45 end.
![](http://www.ortizonline.com/publications/april2004/zoom-in-to-cable.jpg)
![](http://www.ortizonline.com/publications/april2004/twistedandlinedup.jpg)
Step 4: Insert cable into RJ-45 end. (do not crimp yet.) Remember, 1236 pins.
![](http://www.ortizonline.com/publications/april2004/no-jacket.jpg)
Step 5. Insert plastic tubing over the wire and into the RJ-45 end. Now crimp the end with a crimping tool.
![](http://www.ortizonline.com/publications/april2004/completed-picture.jpg)
Note: When you first plug in the loopback cable, wait approximately 10 seconds to get a link light. No more carrying around a hub just to get a link light.
Enjoy!
By Efrain Ortiz
相关文章推荐
- ASIHTTPRequest官方文档
- 小记NodeJS两项小技巧(与HTTP相关)
- ListView GridView ViewPager 异步 加载网络图片 缓存到本地
- QQ空间营销十天实战日记
- 异步 HttpContext.Current实现取值的方法(解决异步Application,Session,Cache...等失效的问题)
- 暗黑世界 网络游戏从0开始搭建
- ASIHTTPRequest实现断点续传
- java网络编程(5):SMTP
- The type javax.servlet.http.HttpServletRequest cannot be resolved. It is indirectly referenced fro
- java网络编程(4):FTP
- Http协议:get和post区别
- TCP经受时延的ACK
- WinSock网络编程学习笔记(四)网络转换函数的实现
- http错误403.14 forbidden如何解决
- 使用C#下载网络文件
- java网络编程(3):HTTP协议调用SOAP
- 【Android网络开发の4】解析和生成JSON数据
- Android Asynchronous Http Client - 开源http 多线程引擎
- Charles(最强大的http调试工具)详细教程(下)
- Charles(最强大的http调试工具)详细教程(上)