linux mint13 android使用错误修改记录

android4.0 在我的115里面，下载，修改 .mp3 为.tar.zg，解压并编译，收集错误如下：

如果有人需要可以留言，留下邮箱。

ubuntu 下编译android源码错误解决记录

Ubuntu12.064位源码编译Android4.0

第一次make报错：

********************************************************************************************

问题 1、

CHK include/linux/version.h

CHK include/generated/utsrelease.h

make[1]: `include/generated/mach-types.h' is up to date.

CC kernel/bounds.s

cc1: error: unrecognized command line option "-mlittle-endian"

cc1: error: unrecognized command line option "-mapcs"

cc1: error: unrecognized command line option "-mno-sched-prolog"

cc1: error: unrecognized command line option "-mabi=apcs-gnu"

kernel/bounds.c:1: error: bad value (armv4t) for -march= switch

kernel/bounds.c:1: error: bad value (arm9tdmi) for -mtune= switch

类似问题 解决办法

make ARCH=arm CROSS_COMPILE='编译器位置'

由于是再pc x86环境下编译所以修改为：ARCH=x86 CROSS_COMPILE=

没有交叉编译器的话，可以随便下载一个，我们是模拟的仅仅是学习一下所以无所谓了。

********************************************************************************************

问题2、

CC kernel/cgroup_freezer.o

CC kernel/cpuset.o

kernel/cpuset.c: In function ‘cpuset_can_attach’:

kernel/cpuset.c:1386:18: error: ‘task’ undeclared (first use in this function)

kernel/cpuset.c:1386:18: note: each undeclared identifier is reported only once for each function it appears in

make[1]: *** [kernel/cpuset.o] Error 1

make: *** [kernel] Error 2

解决办法

在kernel/cpuset.c:1380 将task 改成tsk
即：task -->tsk

********************************************************************************************
问题3、

drivers/hello/hello.c:233:2: error: implicit declaration of function ‘init_MUTEX’

解决方法: 注释掉drivers/hello/hello.c:init_MUTEX(&(dev->sem));

********************************************************************************************

问题4、

used [-Wunused-function]

CC [M] drivers/gpio/sch_gpio.o

CC [M] drivers/gpio/rdc321x-gpio.o

CC [M] drivers/gpio/janz-ttl.o

drivers/gpio/janz-ttl.c: In function ‘ttl_set_value’:

drivers/gpio/janz-ttl.c:107:2: error: implicit declaration of function ‘iowrite16be’ [-Werror=implicit-function-declaration]

cc1: some warnings being treated as errors

make[2]: *** [drivers/gpio/janz-ttl.o] Error 1

make[1]: *** [drivers/gpio] Error 2

make: *** [drivers] Error 2

解决方法：

down voteaccepted

Try including this header #include<asm/io.h> If it doesn't work then look at this for all the definitions of iowrite16be http://lxr.free-electrons.com/ident?i=iowrite16be Choose the appropriate header based on your architecture. EDIT : Generally implicit declaration of function xyz() is a warning. May be in your system its been forced to an error with -Werror-implicit-function-declaration . You can search for this in your build structure and try to take it off ( Though itsnot a good practice, but anyways you can do it, if you want the work done ) But if iowrite16be is really missing, then even this method wont help you from the linker's wrath. share|improve this answer edited Mar 13 '12 at 14:30 answered Mar 13 '12 at 12:53 Pavan Manjunath 7,82411338

including the header #include<asm/io.h> didn't fix the error, but i will try the remaining headers, thanks for your response. – usama yaseen Mar 13 '12 at 13:08 removing -Werror-implicit-function-declaration from the makefile fixed the error, thanks for your continuous help. :) – usama yaseen Mar 14 '12 at 12:58 @usamayaseen Glad to hear that :) – Pavan ManjunathMar 14 '12 at 13:02

解决方法：

leo linux-2.6.36-android # grep -r Werror=implicit-function-declaration . //搜索错误提示

./arch/arm/kernel/asm-offsets.s:@ -Werror=implicit-function-declaration -Wno-format-security

./kernel/bounds.s:@ -Werror=implicit-function-declaration -Wno-format-security

leo linux-2.6.36-android #

修改：1、将-Werror=implicit-function-declaration -Wno-format-security // 将错误提示删掉，像做手术一样哪里出问题，切哪里，

从/arch/arm/kernel/asm-offsets.s:@ -Werror=implicit-function-declaration -Wno-format-security中删掉

删除位置：@ -Wundef -Wstrict-prototypes -Wno-trigraphs

@ -Werror=implicit-function-declaration -Wno-format-security

@ -Wframe-larger-than=1024 -Wdeclaration-after-statement -Wno-pointer-sign

2、将-Werror=implicit-function-declaration -Wno-format-security

从/kernel/bounds.中删掉

删除位置：@ -Wundef -Wstrict-prototypes -Wno-trigraphs

@ -Werror=implicit-function-declaration -Wno-format-security

@ -Wframe-larger-than=1024 -Wdeclaration-after-statement -Wno-pointer-sign

以上方法都是了，还是不可以，然后找到这个错误是出现在janz-ttl这个模块，由于我们这时第一次编译这个系统，可能用不到这个模块，为了下一步的进展我就在janz-ttl目录里的makefile里面将这个模块屏蔽了。

补充：

implicit declaration of function 这种警告问题的原因及解决方法

1 没有把函数所在的c文件生成.o目标文件

2 在函数所在的c文件中定义了，但是没有在与之相关联的.h文件中声明
这个问题没有解决 换成了x86环境 继续编译

********************************************************************************************

问题5、此错误是在x86环境下编译（即：ARCH=x86
CROSS_COMPILE=）出现的错误：

VDSO arch/x86/vdso/vdso.so.dbg

gcc: error: elf_x86_64: No such file or directory

OBJCOPY arch/x86/vdso/vdso.so

objcopy: 'arch/x86/vdso/vdso.so.dbg': No such file

make[2]: *** [arch/x86/vdso/vdso.so] Error 1

make[1]: *** [arch/x86/vdso] Error 2

make: *** [arch/x86] Error 2

leo linux-2.6.36-android #

解决方法：

这个问题是由于 gcc 4.6 不再支持 linker-style 架构。讲 arch/x86/vdso/Makefile中，

将以 VDSO_LDFLAGS_vdso.lds 开头所在行的 "-m elf_x86_64" 替换为 "-m64"。 (只修改这一步，就可以了)

将以 VDSO_LDFLAGS_vdso32.lds 开头所在行的 "-m elf_x86" 替换为 "-m32"。

********************************************************************************************

问题6、

drivers/misc/pmem.c:1226:2: warning: (near initialization for ‘debug_fops.open’) [enabled by default]

drivers/misc/pmem.c: In function ‘pmem_setup’:

drivers/misc/pmem.c:1301:60: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

cc1: some warnings being treated as errors

make[2]: *** [drivers/misc/pmem.o] Error 1

make[1]: *** [drivers/misc] Error 2

make: *** [drivers] Error 2

leo linux-2.6.36-android #

解决方法：

********************************************************************************************

问题7、

Your display is too small to run Menuconfig

　　因工作需要，现在要编译Ubuntu系统的内核。在编译的过程中，遇到“Your display is too small to run Menuconfig”的问题，刚遇到时一阵紧张，怎么又出问题呢？后来，搜索之后一颗悬着的心才算落下。

　　首先，看一下详细的错误信息，如下所示：

　　Your display is too small to runMenuconfig!

　　It must be at least 19 lines by 80 columns.

　　其次，看一下解决方案：先把你终端的窗体最大化再执行相同的命令，是不是感觉很奇妙？

********************************************************************************************

问题8、

android 4.0.1源码编译成功后运行emulator提示No command 'emulator' found

1、编辑/etc/environment增加emulator所在目录（增加蓝色字体内容）：

PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/lib/jvm/java-1.6.0_27/bin:/home/test1/WORKING_DIRECTORY/out/host/linux-x86/bin"

CLASSPATH="/usr/lib/jvm/java-1.6.0_27/lib"

JAVA_HOME="/usr/lib/jvm/java-1.6.0_27"

ANDROID_PRODUCT_OUT="/home/test1/WORKING_DIRECTORY/out/target/product/generic"

注意：修改这个后为使之生效需要logout一下。

另外，android模拟器第一次启动时间超长，需要耐心等待

********************************************************************************************

第9- 是编译android4.0出现错误（android4.0 在我的115里面，下载，修改 .mp3 为.tar.zg，解压并编译，编译环境：linux mint13 64位）：

问题9、

<built-in>:0:0: note: this is the location of the previous definition

host StaticLib: libOpenglCodecCommon (out/host/linux-x86/obj/STATIC_LIBRARIES/li

bOpenglCodecCommon_intermediates/libOpenglCodecCommon.a)

host SharedLib: libOpenglRender (out/host/linux-x86/obj/lib/libOpenglRender.so)

/usr/bin/ld: cannot find -lX11

collect2: ld returned 1 exit status

make: *** [out/host/linux-x86/obj/lib/libOpenglRender.so] Error 1

解决方法:$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so

********************************************************************************************

问题10、

<built-in>:0:0: note: this is the location of the previous definition

host StaticLib: libOpenglCodecCommon (out/host/linux-x86/obj/STATIC_LIBRARIES/li

bOpenglCodecCommon_intermediates/libOpenglCodecCommon.a)

host SharedLib: libOpenglRender (out/host/linux-x86/obj/lib/libOpenglRender.so)

/usr/bin/ld: cannot find -lX11

collect2: ld returned 1 exit status

make: *** [out/host/linux-x86/obj/lib/libOpenglRender.so] Error 1

解决方法:$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so

********************************************************************************************

问题11、

<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined [enabled by default]

<built-in>:0:0: note: this is the location of the previous definition cc1plus: all warnings being treated as errors

make: *** [out/host/linux-x86/obj/EXECUTABLES/obbtool_intermediates/Main.o] Error 1

解决方法：这是由于11.10的gcc版本过高造成的，可参考这篇文章修改：http://hi.baidu.com/designhouse/blog/item/fec5cdbf8d6a231618d81fc1.html。

或者修改build/core/combo/HOST_linux-x86.mk 61行

将 HOST_GLOBAL_CFLAGS += -D_FORTIFY_SOURCE=0

修改成 HOST_GLOBAL_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0

********************************************************************************************

问题12、

g++: g++: selected multilib '32' not installed

解决方法：
apt-get install g++-4.4-multilib

********************************************************************************************

问题13、

host StaticLib: libGLcommon (out/host/linux-x86/obj/STATIC_LIBRARIES/libGLcommon

_intermediates/libGLcommon.a)

host SharedLib: libGLES_CM_translator (out/host/linux-x86/obj/lib/libGLES_CM_tra

nslator.so)

/usr/bin/ld: cannot find -lGL

collect2: ld returned 1 exit status

make: *** [out/host/linux-x86/obj/lib/libGLES_CM_translator.so] Error 1

解决方法: sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2 /usr/lib/libGL.so

********************************************************************************************

问题14、

CC [M] drivers/gpio/wm8350-gpiolib.o

CC [M] drivers/gpio/wm8994-gpio.o

drivers/gpio/wm8994-gpio.c:84: warning: 'wm8994_gpio_to_irq' defined but not used

CC [M] drivers/gpio/sch_gpio.o

CC [M] drivers/gpio/rdc321x-gpio.o

CC [M] drivers/gpio/janz-ttl.o

drivers/gpio/janz-ttl.c: In function 'ttl_set_value':

drivers/gpio/janz-ttl.c:107: error: implicit declaration of function 'iowrite16be'

make[2]: *** [drivers/gpio/janz-ttl.o] Error 1

make[1]: *** [drivers/gpio] Error 2

make: *** [drivers] Error 2

leo common # make menuconfig

由于升级或者其他原因会出现 implicit declaration of function错误，前面也提过一些原因。但对于我们没有用到模块可以直接删掉。

解决方法：

在drivers/gpio/中的makefile和kconfig中屏蔽wm8994-gpio.o

或者使用make menuconfig 菜单 删除。

********************************************************************************************

问题15、

编译内核出现

In file included from fs/coda/psdev.c:45:

include/linux/coda.h:248: error: expected specifier-qualifier-list before 'u_quad_t'错误。

解决方法：

在内核配置中有如下

File Systems ->

-> Network File Systems ->

-> <M> Coda file system support (advanced network fs)

选项，取消选择Coda file system support，重新编译。

根据老罗的博客编译好了android环境，可以运气模拟器了，

以下是再模拟器下的错误：

16、

执行 emulator 提示 emulator: WARNING: system partition size adjusted to match image file (166 MB > 66 MB)

解决方法：

emulator -partition-size 1024 -kernel ./kernel/common/arch/arm/boot/zImage &