IBM DS storage reset password
2013-12-06 00:04
1031 查看
重置后没有密码。
方法一、直接按背后的小孔 5秒,不会影响数据。
方法二、telenet(根据微码版本不同,只能选择其中一条命令进行密码重置) ping通后用telnet命令登入
尝试putty(Seeattached file: putty.zip)进行telnet,输入连接管理口的ip地址,连接类型选择:telnet,然后打开
账号 shellUsr
密码 wy3oo&w4(注意大小写)
We have below 3 commands to reset SMpasswd (Please execute in CNTL-A command line)
1. clearSYMbolPassword
Test OK in FW 06.60 and 07.60, can berun concurrently, no need to reboot CNTL
2. symbolPwdReset
Test OK in FW 06.60 and 07.60, can berun concurrently, no need to reboot CNTL
-> symbolPwdReset
Are you sure that you want to reset theStorage Array Password ? (Y/N): y
Storage Array Password resetsuccessful
value = 42 = 0x2a = '*'
3.spriMenuPwdReset
NOT work in FW 06.60 and 07.60, Test OKby PFE steven in FW 07.70, can be run concurrently, no need to reboot CNTL
> spriMenuPwdReset
Are you sure that you want to reset theStorage Array Password ? (Y/N): y
Storage Array Password reset successful
value = 42 = 0x2a = '*'
Note: Beginning from FW 7.70, SMGUI password MUST be set, otherwise you can not open the subsystem managementwindow. You can not ignore the password warning message when you open the SM aspervious FW level.
本文出自 “北国贱人Leisonn” 博客,请务必保留此出处http://leisonn.blog.51cto.com/341869/1336850
方法一、直接按背后的小孔 5秒,不会影响数据。
方法二、telenet(根据微码版本不同,只能选择其中一条命令进行密码重置) ping通后用telnet命令登入
尝试putty(Seeattached file: putty.zip)进行telnet,输入连接管理口的ip地址,连接类型选择:telnet,然后打开
账号 shellUsr
密码 wy3oo&w4(注意大小写)
We have below 3 commands to reset SMpasswd (Please execute in CNTL-A command line)
1. clearSYMbolPassword
Test OK in FW 06.60 and 07.60, can berun concurrently, no need to reboot CNTL
2. symbolPwdReset
Test OK in FW 06.60 and 07.60, can berun concurrently, no need to reboot CNTL
-> symbolPwdReset
Are you sure that you want to reset theStorage Array Password ? (Y/N): y
Storage Array Password resetsuccessful
value = 42 = 0x2a = '*'
3.spriMenuPwdReset
NOT work in FW 06.60 and 07.60, Test OKby PFE steven in FW 07.70, can be run concurrently, no need to reboot CNTL
> spriMenuPwdReset
Are you sure that you want to reset theStorage Array Password ? (Y/N): y
Storage Array Password reset successful
value = 42 = 0x2a = '*'
Note: Beginning from FW 7.70, SMGUI password MUST be set, otherwise you can not open the subsystem managementwindow. You can not ignore the password warning message when you open the SM aspervious FW level.
本文出自 “北国贱人Leisonn” 博客,请务必保留此出处http://leisonn.blog.51cto.com/341869/1336850
相关文章推荐
- vCenter与ibm DS Storage Manager 10冲突导致VC插件异常
- IBM FASTT StorageManager的使用(DS4000系列存储管理软件)
- IBM DS Storage Upgrade Controller Firmware
- IBM DS Storage ISCSI Configuration
- IBM TotalStorage DS4300 笔记
- IBM DS Storage 在rhel多路径软件 推荐
- IBM DS Storage--Replace drive option
- 【Storage】IBM DS8100开机及配置过程
- ibm ds5020 for aix storage manager
- 【Storage】IBM DS8100开机及配置过程
- Reset password for user SAP*
- CMSEASY /lib/tool/front_class.php、/lib/default/user_act.php arbitrary user password reset vulnerability
- 详解IBM DS 存储 Failover 的三种模式
- IBM® System Storage® LTO Ultrium 6 Tape Drive
- 【MySQL】ERROR 1820 (HY000): You must reset your password using ALTER USER statement before executing
- How to Reset Forgotten Root Password in RHEL/CentOS and Fedora
- How to Reset the Root Password 5.5
- mac mysql error You must reset your password using ALTER USER statement before executing this statem
- How to Reset MySQL root Password on CentOS
- IBM-DS3400双机配置文档(图例教程)