VNC“No configured security type is supported by 3.3 viewer“的解决办法!
2013-11-20 11:30
609 查看
VNC“No configured security type is supported by 3.3 viewer“的解决办法!
用移动设备连接PC的VNC服务器端时,总会出现这种奇怪的现象,用ultraVNC做服务期端的话,可以非常容易地从移动设备连接到PC端。可是用realVNC的话,缺总会出现No configured security type is supported by 3.3 viewer这样的错误提示,甚是奇怪,可是realVNC如此大牌的VNC软件必须解决这个问题啊,要不然多郁闷啊。
在网上查呀查,终于找到了一篇老外发的帖子,看来老外也遇到过这种问题。帖子内容如下:
I have RealVNC Enterprise installed on RedHat Linux 9. When I try to connect
to the linux box with VNC clients I get the following error:
Noconfiguredsecuritytypeissupportedby 3.3 viewer.
I understand from postings in this list that the encryption being used by
RealVNC Enterprise server is incompatible with these viewers. However, I see
no instructions for changing the authentication method to just password
authentication. I need that because some people who need to VNC into this
server will not want to purchase a RealVNC license. Is there a shell command I
can use to tell RealVNC that I want simple password authentication?
--
Jim Strickland - MCP
IT Manager
American Roamer
回复:
Jim,
If you set your server to use VNC Authentication and the server's Encryption
setting to Prefer On in order for RFB 3.3 clients to be able to connect.
Alternatively, since the server is licensed, you can just use VNC Enterprise
Edition viewers to connect to it.
Regards,
Wez @ RealVNC Ltd.
> -----Original Message-----
> From: vnc-list-admin [at] realvnc
> [mailto:vnc-list-admin [at] realvnc] On Behalf Of Jim Strickland
> Sent: 01 June 2006 20:31
> To: vnc-list [at] realvnc
> Subject: Noconfiguredsecuritytypeissupportedby 3.3 viewer
>
> I have RealVNC Enterprise installed on RedHat Linux 9. When I
> try to connect
> to the linux box with VNC clients I get the following error:
>
> Noconfiguredsecuritytypeissupportedby 3.3 viewer.
>
> I understand from postings in this list that the encryption
> being used by
> RealVNC Enterprise server is incompatible with these viewers.
> However, I see
> no instructions for changing the authentication method to
> just password
> authentication. I need that because some people who need to
> VNC into this
> server will not want to purchase a RealVNC license. Is there
> a shell command I
> can use to tell RealVNC that I want simple password authentication?
>
> --
> Jim Strickland - MCP
> IT Manager
> American Roamer
>http://www.americanroamer.com
> _______________________________________________
> VNC-List mailing list
> VNC-List [at] realvnc
> To remove yourself from the list visit:
>http://www.realvnc.com/mailman/listinfo/vnc-list
>
> --
> No virus found in this incoming message.
> Checked by ***G Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.0/353 - Release
> Date: 31/05/2006
>
>
--
No virus found in this outgoing message.
Checked by ***G Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/354 - Release Date: 01/06/2006
====================================================================
其实最重要的就一句话,setting to Prefer On in order for RFB 3.3 clients to be able to connect.
意思就是,把realVNC的encryption选项选为prefer on即可。
so easy!让我折腾了这么旧
用移动设备连接PC的VNC服务器端时,总会出现这种奇怪的现象,用ultraVNC做服务期端的话,可以非常容易地从移动设备连接到PC端。可是用realVNC的话,缺总会出现No configured security type is supported by 3.3 viewer这样的错误提示,甚是奇怪,可是realVNC如此大牌的VNC软件必须解决这个问题啊,要不然多郁闷啊。
在网上查呀查,终于找到了一篇老外发的帖子,看来老外也遇到过这种问题。帖子内容如下:
I have RealVNC Enterprise installed on RedHat Linux 9. When I try to connect
to the linux box with VNC clients I get the following error:
Noconfiguredsecuritytypeissupportedby 3.3 viewer.
I understand from postings in this list that the encryption being used by
RealVNC Enterprise server is incompatible with these viewers. However, I see
no instructions for changing the authentication method to just password
authentication. I need that because some people who need to VNC into this
server will not want to purchase a RealVNC license. Is there a shell command I
can use to tell RealVNC that I want simple password authentication?
--
Jim Strickland - MCP
IT Manager
American Roamer
回复:
Jim,
If you set your server to use VNC Authentication and the server's Encryption
setting to Prefer On in order for RFB 3.3 clients to be able to connect.
Alternatively, since the server is licensed, you can just use VNC Enterprise
Edition viewers to connect to it.
Regards,
Wez @ RealVNC Ltd.
> -----Original Message-----
> From: vnc-list-admin [at] realvnc
> [mailto:vnc-list-admin [at] realvnc] On Behalf Of Jim Strickland
> Sent: 01 June 2006 20:31
> To: vnc-list [at] realvnc
> Subject: Noconfiguredsecuritytypeissupportedby 3.3 viewer
>
> I have RealVNC Enterprise installed on RedHat Linux 9. When I
> try to connect
> to the linux box with VNC clients I get the following error:
>
> Noconfiguredsecuritytypeissupportedby 3.3 viewer.
>
> I understand from postings in this list that the encryption
> being used by
> RealVNC Enterprise server is incompatible with these viewers.
> However, I see
> no instructions for changing the authentication method to
> just password
> authentication. I need that because some people who need to
> VNC into this
> server will not want to purchase a RealVNC license. Is there
> a shell command I
> can use to tell RealVNC that I want simple password authentication?
>
> --
> Jim Strickland - MCP
> IT Manager
> American Roamer
>http://www.americanroamer.com
> _______________________________________________
> VNC-List mailing list
> VNC-List [at] realvnc
> To remove yourself from the list visit:
>http://www.realvnc.com/mailman/listinfo/vnc-list
>
> --
> No virus found in this incoming message.
> Checked by ***G Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.0/353 - Release
> Date: 31/05/2006
>
>
--
No virus found in this outgoing message.
Checked by ***G Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/354 - Release Date: 01/06/2006
====================================================================
其实最重要的就一句话,setting to Prefer On in order for RFB 3.3 clients to be able to connect.
意思就是,把realVNC的encryption选项选为prefer on即可。
so easy!让我折腾了这么旧
相关文章推荐
- The project type is not supported by this installation.解决办法
- The project type is not supported by this installation 尚未解决
- 关于javamail-with-ms-exchange-no-authentication-mechansims-supported-by-both-server错误的解决办法
- git 出现The current branch is not configured for pull No value for key branch.master.merge found in configuration错误的解决办法
- cocos2d 'root' is no longer supported问题解决办法
- Ubuntu下Firefox播放mp3显示HTTP "Content-Type" of "audio/mpeg" is not supported错误的解决办法
- Oracle 数据库 Record is locked by another user 问题解决办法
- ECShop后台站点地图关于 Deprecated: Assigning the return value of new by reference is deprecated的错误的解决办法
- JDBC规范-java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]The specified SQL type is not supported by this driver
- php 报错Deprecated: Assigning the return value of new by reference is deprecated in的解决办法
- [SSH]Not supported by BasicDataSource 异常解决办法
- mac下面通过brew安装东西的时候报Error: Running Homebrew as root is extremely dangerous and no longer supported的解决
- 问题No enclosing instance of type E is accessible的解决
- Oracle 数据库 Record is locked by another user 问题解决办法
- CodeSign error: code signing is required for product type Application in SDK iOS解决办法
- Maven项目报错:“Port 8080 required by Tomcat v8.0 Service is already in use”解决办法
- initialization of 'XXX' is skipped by 'case' label 原因及解决办法
- 解决TOMCAT的 administration web application is no longer installed by default问题
- 解决The current branch is not configured for pull No value for key branch.master.merge found in config
- JS TypeError: $.browser is undefined 解决办法