Ubuntu 10.04 安装Nvidia显卡后开机花屏完美解决
2013-10-15 22:46
465 查看
1.可以解决的问题:
(1)安装驱动后开机和关机画面花屏,分辨率低;
(2)开机画面直接出现,一闪而过,错过点点进度过程。(这个我原来幼稚地认为是10.04的开机速度太快,进度条来不及显示呢。呵呵)
2.解决方案:uvesafb 替代 vesafb(具体什么意思我也不知道)
3.所需包:
(1)v86d(uvesafb需要)
(2)hwinfo(查看framebuffer)
4.步骤
(1)安装驱动:
方法一,Nvidia官网下载最新驱动,但是得先屏蔽掉nouveau,而且安装后会出现Nvidia巨大的Logo,我没有用 这种方法。
方法二,System-->Administration-->Hardware Drivers,我选的是那个Recommended。
(2)安装所需包:
sudo apt-get install v86d hwinfo
(3)查看framebuffer
sudo hwinfo --framebuffer
我的显示器分辨率是1280x800的所以我需要的是:1280x800-24
(4)修改grub文件
sudo gedit /etc/default/grub
-------------------------------------------------------------------------------------------------------------------
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x800-24,mtrr=3,scroll=ywrap"
GRUB_CMDLINE_LINUX=""
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=1280x800
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
-------------------------------------------------------------------------------------------------------------------
(5)修改initramfs:
sudo gedit /etc/initramfs-tools/modules
-------------------------------------------------------------------------------------------------------------------
# List of modules that you want to include in your initramfs.
#
# Syntax: module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
uvesafb mode_option=1280x800-24 mtrr=3 scroll=ywrap
-------------------------------------------------------------------------------------------------------------------
(6)强制使用Framebuffer:
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
(7)更新grub和initramfs:
sudo update-grub2
sudo update-initramfs -u
(8)重启
http://forum.ubuntu.org.cn/viewtopic.php?t=269452
(1)安装驱动后开机和关机画面花屏,分辨率低;
(2)开机画面直接出现,一闪而过,错过点点进度过程。(这个我原来幼稚地认为是10.04的开机速度太快,进度条来不及显示呢。呵呵)
2.解决方案:uvesafb 替代 vesafb(具体什么意思我也不知道)
3.所需包:
(1)v86d(uvesafb需要)
(2)hwinfo(查看framebuffer)
4.步骤
(1)安装驱动:
方法一,Nvidia官网下载最新驱动,但是得先屏蔽掉nouveau,而且安装后会出现Nvidia巨大的Logo,我没有用 这种方法。
方法二,System-->Administration-->Hardware Drivers,我选的是那个Recommended。
(2)安装所需包:
sudo apt-get install v86d hwinfo
(3)查看framebuffer
sudo hwinfo --framebuffer
我的显示器分辨率是1280x800的所以我需要的是:1280x800-24
(4)修改grub文件
sudo gedit /etc/default/grub
-------------------------------------------------------------------------------------------------------------------
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x800-24,mtrr=3,scroll=ywrap"
GRUB_CMDLINE_LINUX=""
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=1280x800
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
-------------------------------------------------------------------------------------------------------------------
(5)修改initramfs:
sudo gedit /etc/initramfs-tools/modules
-------------------------------------------------------------------------------------------------------------------
# List of modules that you want to include in your initramfs.
#
# Syntax: module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
uvesafb mode_option=1280x800-24 mtrr=3 scroll=ywrap
-------------------------------------------------------------------------------------------------------------------
(6)强制使用Framebuffer:
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
(7)更新grub和initramfs:
sudo update-grub2
sudo update-initramfs -u
(8)重启
http://forum.ubuntu.org.cn/viewtopic.php?t=269452
相关文章推荐
- Ubuntu 10.04 安装Nvidia显卡后开机花屏完美解决(图解)
- Ubuntu 10.04 安装Nvidia显卡后开机花屏完美解决(图解)
- Ubuntu 10.04 安装Nvidia显卡后开机花屏的解决方法
- 双显卡笔记本安装双系统ubuntu开机、分辨率、卡logo、黑屏的解决方法
- [转帖]完美解决NVIDIA最新显卡驱动无法安装。(修改教程篇,各机型都可以)
- Ubuntu 10.04 安装显卡后 调整开机分辨率
- ubuntu10.04编译安装gvim7.3,完美解决一系列问题
- ubuntu 安装NVIDIA 显卡后分辨率改变成640*480解决办法
- Nvidia显卡电脑安装Ubuntu16.04遇到的问题与解决办法
- ubuntu安装nvidia官方驱动(安装CUDA7.5之后,找不到TITAN显卡的解决方法)
- Ubuntu 10.04 安装 Nvidia GT 430 显卡驱动
- 关于NVIDIA显卡Ubuntu安装卡Ubuntu界面的解决办法
- ubuntu安装后开机花屏怎么解决
- 解决Nvidia显卡的电脑安装Ubuntu及驱动的各种坑
- 比较完美地解决了Ubuntu下NVIDIA和Intel双显卡的问题!
- 比较完美地解决了Ubuntu下NVIDIA和Intel双显卡的问题! http://tieba.baidu.com/p/1462926619
- Ubuntu 8.10没有声音(解决方法小结),及显卡驱动(Nvidia-xsever)安装
- ubuntu 安装NVIDIA 显卡后分辨率改变成640*480解决办法
- Ubuntu 8.10没有声音(解决方法小结),及显卡驱动(Nvidia-xsever)安装
- Ubuntu 16.04安装NVIDIA显卡驱动 、CUDA-8.0、cuDNN和TensorFlow问题及解决方法