【荐】20 MySQL (Mysqladmin) Commands for Database Administration in Linux
2013-09-22 08:31
567 查看
mysqladmin is
a command-line utility the comes with MySQL server
and it is used byDatabase
Administrators to perform some basic MySQL tasks
easily such as setting root password, changing root password, monitoring mysql processes, reloading privileges, checking server status etc.
In this article we’ve compiled some very useful ‘mysqladmin‘
commands that are used by system/database administrators in their day-to-day work. You must have MySQL server
installed on your system to perform these tasks.
If you don’t have MySQL server
installed or you are using older version of MySQL server,
then we recommend you all to install or update your version by following our below article.
Installation
of MySQL 5.5.28 Server on RHEL/CentOS/Fedora
If you have fresh installation of MySQL server,
then it doesn’t required any password to connect it as root user. To set MySQL password
for root user, use the following command.
If you would like to change or update MySQL root
password, then you need to type the following command. For example, say your old password is 123456 and
you want to change it with new password say xyz123.
To find out whether MySQL server
is up and running, use the following command.
The following command shows MySQL version
along with the current running status .
To find out current status of MySQL server,
use the following command. The mysqladmincommand
shows the status of uptime with
running threads and queries.
To check all the running status of MySQL server
variables and values, type the following command. The output would be similar to below.
To see all the running variables and values of MySQL server,
use the command as follows.
The following command will display all the running process of MySQL database
queries.
To create a new database in MySQL server,
use the command as shown below.
To drop a Database in MySQL server,
use the following command. You will be asked to confirm press ‘y‘.
The reload command
tells the server to reload the grant tables. The refresh command
flushes all tables and reopens the log files.
To shutdown MySQL server
safely, type the following command.
You can also use the following commands to start/stop MySQL server.
Following are some useful flush commands with their description.
flush-hosts:
Flush all host information from host cache.
flush-tables:
Flush all tables.
flush-threads:
Flush all threads cache.
flush-logs:
Flush all information logs.
flush-privileges:
Reload the grant tables (same as reload).
flush-status:
Clear status variables.
Use the following command to identify sleeping MySQL client
process.
Now, run the following command with kill and process
ID as shown below.
If you like to kill multiple
process, then pass the process
ID‘s with comma separated as shown below.
If you would like to execute multiple ‘mysqladmin‘
commands together, then the command would be like this.
To connect remote MySQL server,
use the -h (host)
with IP
Address of remote machine.
Let’s say you would like to see the status of
remote MySQL server,
then the command would be.
To start/stop MySQL
replication on salve server, use the following commands.
It tells the server to write debug information about locks in use, used memory and query usage to the MySQL log
file including information about event scheduler.
To find out more options and usage of myslqadmin command
use the help command as shown below. It will display a list of available options.
We have tried our best to include almost all of ‘mysqladmin‘
commands with their examples in this article, If still, we’ve missed anything, please do let us know via comments and don’t forget to share with your friends.
原文链接:http://www.tecmint.com/mysqladmin-commands-for-database-administration-in-linux/
a command-line utility the comes with MySQL server
and it is used byDatabase
Administrators to perform some basic MySQL tasks
easily such as setting root password, changing root password, monitoring mysql processes, reloading privileges, checking server status etc.
In this article we’ve compiled some very useful ‘mysqladmin‘
commands that are used by system/database administrators in their day-to-day work. You must have MySQL server
installed on your system to perform these tasks.
If you don’t have MySQL server
installed or you are using older version of MySQL server,
then we recommend you all to install or update your version by following our below article.
Installation
of MySQL 5.5.28 Server on RHEL/CentOS/Fedora
1. How to set MySQL Root password?
If you have fresh installation of MySQL server,then it doesn’t required any password to connect it as root user. To set MySQL password
for root user, use the following command.
# mysqladmin -u root password YOURNEWPASSWORD
2. How to Change MySQL Root password?
If you would like to change or update MySQL rootpassword, then you need to type the following command. For example, say your old password is 123456 and
you want to change it with new password say xyz123.
mysqladmin -u root -p123456 password 'xyz123'
3. How to check MySQL Server is running?
To find out whether MySQL serveris up and running, use the following command.
# mysqladmin -u root -p ping Enter password: mysqld is alive
4. How to Check which MySQL version I am running?
The following command shows MySQL versionalong with the current running status .
# mysqladmin -u root -p version Enter password: mysqladmin Ver 8.42 Distrib 5.5.28, for Linux on i686 Copyright (c) 2000, 2012, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Server version 5.5.28 Protocol version 10 Connection Localhost via UNIX socket UNIX socket /var/lib/mysql/mysql.sock Uptime: 7 days 14 min 45 sec Threads: 2 Questions: 36002 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.059
5. How to Find out current Status of MySQL server?
To find out current status of MySQL server,use the following command. The mysqladmincommand
shows the status of uptime with
running threads and queries.
# mysqladmin -u root -ptmppassword status Enter password: Uptime: 606704 Threads: 2 Questions: 36003 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.059
6. How to check status of all MySQL Server Variable’s and value’s?
To check all the running status of MySQL servervariables and values, type the following command. The output would be similar to below.
# mysqladmin -u root -p extended-status Enter password: +------------------------------------------+-------------+ | Variable_name | Value | +------------------------------------------+-------------+ | Aborted_clients | 3 | | Aborted_connects | 3 | | Binlog_cache_disk_use | 0 | | Binlog_cache_use | 0 | | Binlog_stmt_cache_disk_use | 0 | | Binlog_stmt_cache_use | 0 | | Bytes_received | 6400357 | | Bytes_sent | 2610105 | | Com_admin_commands | 3 | | Com_assign_to_keycache | 0 | | Com_alter_db | 0 | | Com_alter_db_upgrade | 0 | | Com_alter_event | 0 | | Com_alter_function | 0 | | Com_alter_procedure | 0 | | Com_alter_server | 0 | | Com_alter_table | 0 | | Com_alter_tablespace | 0 | +------------------------------------------+-------------+
7. How to see all MySQL server Variables and Values?
To see all the running variables and values of MySQL server,use the command as follows.
# mysqladmin -u root -p variables Enter password: +---------------------------------------------------+----------------------------------------------+ | Variable_name | Value | +---------------------------------------------------+----------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | autocommit | ON | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr | | big_tables | OFF | | binlog_cache_size | 32768 | | binlog_direct_non_transactional_updates | OFF | | binlog_format | STATEMENT | | binlog_stmt_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_filesystem | binary | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | +---------------------------------------------------+----------------------------------------------+
8. How to check all the running Process of MySQL server?
The following command will display all the running process of MySQL databasequeries.
# mysqladmin -u root -p processlist Enter password: +-------+---------+-----------------+---------+---------+------+-------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +-------+---------+-----------------+---------+---------+------+-------+------------------+ | 18001 | rsyslog | localhost:38307 | rsyslog | Sleep | 5590 | | | | 18020 | root | localhost | | Query | 0 | | show processlist | +-------+---------+-----------------+---------+---------+------+-------+------------------+
9. How to create a Database in MySQL server?
To create a new database in MySQL server,use the command as shown below.
# mysqladmin -u root -p create databasename Enter password:
# mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 18027 Server version: 5.5.28 MySQL Community Server (GPL) by Remi Copyright (c) 2000, 2012, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | databasename | | mysql | | test | +--------------------+ 8 rows in set (0.01 sec) mysql>
10. How to drop a Database in MySQL server?
To drop a Database in MySQL server,use the following command. You will be asked to confirm press ‘y‘.
# mysqladmin -u root -p drop databasename Enter password: Dropping the database is potentially a very bad thing to do. Any data stored in the database will be destroyed. Do you really want to drop the 'databasename' database [y/N] y Database "databasename" dropped
11. How to reload/refresh MySQL Privileges?
The reload commandtells the server to reload the grant tables. The refresh command
flushes all tables and reopens the log files.
# mysqladmin -u root -p reload; # mysqladmin -u root -p refresh
12. How to shutdown MySQL server Safely?
To shutdown MySQL serversafely, type the following command.
mysqladmin -u root -p shutdown Enter password:
You can also use the following commands to start/stop MySQL server.
# /etc/init.d/mysqld stop # /etc/init.d/mysqld start
13. Some useful MySQL Flush commands
Following are some useful flush commands with their description.flush-hosts:
Flush all host information from host cache.
flush-tables:
Flush all tables.
flush-threads:
Flush all threads cache.
flush-logs:
Flush all information logs.
flush-privileges:
Reload the grant tables (same as reload).
flush-status:
Clear status variables.
# mysqladmin -u root -p flush-hosts # mysqladmin -u root -p flush-tables # mysqladmin -u root -p flush-threads # mysqladmin -u root -p flush-logs # mysqladmin -u root -p flush-privileges # mysqladmin -u root -p flush-status
14. How to kill Sleeping MySQL Client Process?
Use the following command to identify sleeping MySQL clientprocess.
# mysqladmin -u root -p processlist Enter password: +----+------+-----------+----+---------+------+-------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+------+-----------+----+---------+------+-------+------------------+ | 5 | root | localhost | | Sleep | 14 | | | | 8 | root | localhost | | Query | 0 | | show processlist | +----+------+-----------+----+---------+------+-------+------------------+
Now, run the following command with kill and process
ID as shown below.
# mysqladmin -u root -p kill 5 Enter password: +----+------+-----------+----+---------+------+-------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+------+-----------+----+---------+------+-------+------------------+ | 12 | root | localhost | | Query | 0 | | show processlist | +----+------+-----------+----+---------+------+-------+------------------+
If you like to kill multiple
process, then pass the process
ID‘s with comma separated as shown below.
# mysqladmin -u root -p kill 5,10
15. How to run multiple mysqladmin commands together?
If you would like to execute multiple ‘mysqladmin‘commands together, then the command would be like this.
# mysqladmin -u root -p processlist status version Enter password: +----+------+-----------+----+---------+------+-------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+------+-----------+----+---------+------+-------+------------------+ | 8 | root | localhost | | Query | 0 | | show processlist | +----+------+-----------+----+---------+------+-------+------------------+ Uptime: 3801 Threads: 1 Questions: 15 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.003 mysqladmin Ver 8.42 Distrib 5.5.28, for Linux on i686 Copyright (c) 2000, 2012, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Server version 5.5.28 Protocol version 10 Connection Localhost via UNIX socket UNIX socket /var/lib/mysql/mysql.sock Uptime: 1 hour 3 min 21 sec Threads: 1 Questions: 15 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.003
16. How to Connect remote mysql server
To connect remote MySQL server,use the -h (host)
with IP
Address of remote machine.
# mysqladmin -h 172.16.25.126 -u root -p
17. How to execute command on remote MySQL server
Let’s say you would like to see the status ofremote MySQL server,
then the command would be.
# mysqladmin -h 172.16.25.126 -u root -p status
18. How to start/stop MySQL replication on a slave server?
To start/stop MySQLreplication on salve server, use the following commands.
# mysqladmin -u root -p start-slave
# mysqladmin -u root -p stop-slave
19. How to store MySQL server Debug Information to logs?
It tells the server to write debug information about locks in use, used memory and query usage to the MySQL logfile including information about event scheduler.
# mysqladmin -u root -p debug Enter password:
20. How to view mysqladmin options and usage
To find out more options and usage of myslqadmin commanduse the help command as shown below. It will display a list of available options.
# mysqladmin --help
We have tried our best to include almost all of ‘mysqladmin‘
commands with their examples in this article, If still, we’ve missed anything, please do let us know via comments and don’t forget to share with your friends.
原文链接:http://www.tecmint.com/mysqladmin-commands-for-database-administration-in-linux/
相关文章推荐
- linux_20 MySQL (Mysqladmin) Commands for Database Administration in Linux
- MySQL Backup and Restore Commands for Database Administration
- 92.You executed the following commands in an RMAN session for your database instance that has failur
- Switching From Windows to Nix or a Newbie to Linux – 20 Useful Commands for Linux Newbies
- 20 Useful Commands for Linux Newbies
- 20 Funny Commands of Linux or Linux is Fun in Terminal
- linux_20 Advanced Commands for Linux Experts
- Switching From Windows to Nix or a Newbie to Linux – 20 Useful Commands for Linux Newbies
- 20 Useful Commands for Linux Newbies
- Deploying OpenFire for IM (instant message) service (TCP/IP service) with database MySQL , client Spark on linux部署OpenFire IM 消息中间件服务
- 20 Funny Commands of Linux or Linux is Fun in Terminal
- linux_20 Advanced Commands for Middle Level Linux Users
- 20 Advanced Commands for Middle Level Linux Users
- 20 Advanced Commands for Middle Level Linux Users
- database:mysql in linux
- Switching From Windows to Nix or a Newbie to Linux – 20 Useful Commands for Linux Newbies
- 20 Advanced Commands for Linux Experts
- 20 Advanced Commands for Linux Experts
- linux 下安装MySQL出现问题 Access denied for user ''@'localhost' to database 'mysql'