1046. Plane Spotting
2013-09-04 10:20
363 查看
Time Limit: 1 secs, Memory Limit: 32 MB
Craig is fond of planes. Making photographs of planes forms a major part of his daily life. Since he tries to stimulate his social life, and since it’s quite a drive from his home to the airport, Craig tries to be very efficient by investigating what the optimal
times are for his plane spotting. Together with some friends he has collected statistics of the number of passing planes in consecutive periods of fifteen minutes (which for obvious reasons we shall call ‘quarters’). In order to plan his trips as efficiently
as possible, he is interested in the average number of planes over a certain time period. This way he will get the best return for the time invested. Furthermore, in order to plan his trips with his other activities, he wants to have a list of possible time
periods to choose from. These time periods must be ordered such that the most preferable time period is at the top, followed by the next preferable time period, etc. etc. The following rules define which is the order between time periods:
1. A period has to consist of at least a certain number of quarters, since Craig will not drive three hours to be there for just one measly quarter.
2. A period P1 is better than another period P2 if:
* the number of planes per quarter in P1 is higher than in P2;
* the numbers are equal but P1 is a longer period (more quarters);
* the numbers are equal and they are equally long, but period P1 ends earlier.
Now Craig is not a clever programmer, so he needs someone who will write the good stuff: that means you. So, given input consisting of the number of planes per quarter and the requested number of periods, you will calculate the requested list of optimal periods.
If not enough time periods exist which meet requirement 1, you should give only the allowed time periods.
The input starts with a line containing the number of runs N. Next follows two lines for each run. The first line contains three numbers: the number of quarters (1–300), the number of requested best periods (1–100) and the minimum number of quarters Craig wants
to spend spotting planes (1–300). The sec-nod line contains one number per quarter, describing for each quarter the observed number of planes. The airport can handle a maximum of 200 planes per quarter.
The output contains the following results for every run:
* A line containing the text “Result for run <N>:” where <N> is the index of the run.
* One line for every requested period: “<F>-<L>” where <F> is first quarter and <L> is the last quarter of the period. The numbering of quarters starts at 1. The output must be ordered such that the most preferable period is at the top.
Description
Craig is fond of planes. Making photographs of planes forms a major part of his daily life. Since he tries to stimulate his social life, and since it’s quite a drive from his home to the airport, Craig tries to be very efficient by investigating what the optimaltimes are for his plane spotting. Together with some friends he has collected statistics of the number of passing planes in consecutive periods of fifteen minutes (which for obvious reasons we shall call ‘quarters’). In order to plan his trips as efficiently
as possible, he is interested in the average number of planes over a certain time period. This way he will get the best return for the time invested. Furthermore, in order to plan his trips with his other activities, he wants to have a list of possible time
periods to choose from. These time periods must be ordered such that the most preferable time period is at the top, followed by the next preferable time period, etc. etc. The following rules define which is the order between time periods:
1. A period has to consist of at least a certain number of quarters, since Craig will not drive three hours to be there for just one measly quarter.
2. A period P1 is better than another period P2 if:
* the number of planes per quarter in P1 is higher than in P2;
* the numbers are equal but P1 is a longer period (more quarters);
* the numbers are equal and they are equally long, but period P1 ends earlier.
Now Craig is not a clever programmer, so he needs someone who will write the good stuff: that means you. So, given input consisting of the number of planes per quarter and the requested number of periods, you will calculate the requested list of optimal periods.
If not enough time periods exist which meet requirement 1, you should give only the allowed time periods.
Input
The input starts with a line containing the number of runs N. Next follows two lines for each run. The first line contains three numbers: the number of quarters (1–300), the number of requested best periods (1–100) and the minimum number of quarters Craig wantsto spend spotting planes (1–300). The sec-nod line contains one number per quarter, describing for each quarter the observed number of planes. The airport can handle a maximum of 200 planes per quarter.
Output
The output contains the following results for every run: * A line containing the text “Result for run <N>:” where <N> is the index of the run.
* One line for every requested period: “<F>-<L>” where <F> is first quarter and <L> is the last quarter of the period. The numbering of quarters starts at 1. The output must be ordered such that the most preferable period is at the top.
Sample Input
3 10 5 5 1 5 0 2 1 4 2 5 0 2 10 3 5 10 3 1 4 2 6 3 0 8 0 5 5 5 1 2 3 4 5
Sample Output
Result for run 1: 4-8 2-8 6-10 1-8 2-6 Result for run 2: 1-6 1-7 1-9 Result for run 3: 1-5
其实做这道题的时候,犹豫了一下,过了很久才看懂题目的意思。输入的格式就不用说了,就是在数组中找到最多max_num个最优的长度,评判的依据是总体长度的平均值要>=min,所以想到了用结构体或者是类也可以做。
不多说,上代码
#include<iostream> #include<algorithm> using namespace std; struct Node { int star; int end; double average; }; Node node[1000000]; bool cmp(Node a,Node b) { if(a.average >b.average)return true; else if(a.average<b.average)return false; else { if((a.end-a.star)>(b.end-b.star))return true; else if( (a.end-a.star)<(b.end-b.star) )return false; else return a.end<b.end; } } int main() { int n; cin >>n; for(int ss = 1; ss<=n;++ss) { int num;//period的总数 int max_num;//至多的符合的个数 int min;//符合要求的最小飞机数 cin >>num >>max_num>>min; int *a=new int[num]; for (int i = 0; i < num; ++i) { /* code */cin>>a[i]; } int count=0; for (int k=num;k>=min;k--) { /* code */for (int t = 0; t+k <=num; ++t) { /* code */ int sum=0; for (int i = 0; i < k; ++i) { /* code */sum+=a[t+i]; } node[count].star=t+1; node[count].end=t+k; node[count++].average=(double)sum/k; } } sort(node,node+count,cmp); cout<<"Result for run "<<ss<<":"<<endl; for (int i = 0; i < max_num&& i < count; ++i) { /* code */cout<<node[i].star<<"-"<<node[i].end<<endl; } } return 0; }
相关文章推荐
- sicily 1046. Plane Spotting
- [sicily online]1046. Plane Spotting
- sicily 1046 Plane Spotting
- sicily--1046. Plane Spotting
- 1046. Plane Spotting
- Sicily.1046. Plane Spotting(排序)
- sicily 1046. Plane Spotting
- 1046. Plane Spotting
- sicily 1046. Plane Spotting
- sicily 1046. Plane Spotting(排序求topN)
- sicily 1046 Plane Spotting
- Sicily 1046, Plane Spotting
- 1046. Plane Spotting
- 1046. Plane Spotting
- 1046. Plane Spotting
- sicily 1046 Plane Spotting
- 1046 Plane Spotting
- 1046 Color Me Less
- Box2d--错误:1046:找不到类型,或者它不是编译时常数:b2Fixture
- COJ 1046 追杀