Qt for Embedded Linux (嵌入式linuxQT)
2013-08-13 23:27
393 查看
Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window
system.
Application Source code
QT API
QT for Embedded Linux
Linux Kernel Framebuffer Accelerated Graphics
Qt for Embedded Linux applications write directly to the framebuffer, eliminating the need for the X Window System and saving memory. The Linux framebuffer is enabled by default on all modern Linux distributions. For information on older versions, please
refer to the Framebuffer HOWTO document. For development and debugging purposes, Qt for Embedded Linux provides a virtual framebuffer. It is also possible to run an application using the VNC protocol.
嵌入式linuxQT是一个用于在不同嵌入式设备上进行GUI界面和相关应用程序开发的C++框架。它运行在不同的处理器上,并且通常使用嵌入式linux系统。嵌入式QT能使不同的嵌入式设备上使用标准QT的API并提供一个轻量级的窗体系统。
层次结构:
应用程序代码
QT 应用程序接口
嵌入式linuxQT框架
linux 内核, 帧缓存, 图形加速驱动
除了处理Xwindow和保存内存外, 嵌入式QT应用程序一般情况下都直接写帧缓存。现代使用linux的设备,几乎都能够使用帧缓存。需要关于老版本下帧缓存的相关信息,可以参考http://en.tldp.org/HOWTO/Framebuffer-HOWTO/。为了方便开发和调试,嵌入式linuxQT提供了VFb(虚拟帧缓存)。同时也能够使用VNC(虚拟网络计算机)协议运行应用程序。
system.
Application Source code
QT API
QT for Embedded Linux
Linux Kernel Framebuffer Accelerated Graphics
Qt for Embedded Linux applications write directly to the framebuffer, eliminating the need for the X Window System and saving memory. The Linux framebuffer is enabled by default on all modern Linux distributions. For information on older versions, please
refer to the Framebuffer HOWTO document. For development and debugging purposes, Qt for Embedded Linux provides a virtual framebuffer. It is also possible to run an application using the VNC protocol.
嵌入式linuxQT是一个用于在不同嵌入式设备上进行GUI界面和相关应用程序开发的C++框架。它运行在不同的处理器上,并且通常使用嵌入式linux系统。嵌入式QT能使不同的嵌入式设备上使用标准QT的API并提供一个轻量级的窗体系统。
层次结构:
应用程序代码
QT 应用程序接口
嵌入式linuxQT框架
linux 内核, 帧缓存, 图形加速驱动
除了处理Xwindow和保存内存外, 嵌入式QT应用程序一般情况下都直接写帧缓存。现代使用linux的设备,几乎都能够使用帧缓存。需要关于老版本下帧缓存的相关信息,可以参考http://en.tldp.org/HOWTO/Framebuffer-HOWTO/。为了方便开发和调试,嵌入式linuxQT提供了VFb(虚拟帧缓存)。同时也能够使用VNC(虚拟网络计算机)协议运行应用程序。
相关文章推荐
- Qt for Embedded Linux Architecture-嵌入式linuxQT架构
- 基于优龙FS2410开发板的嵌入式Linux/QT/Embedded环境搭建
- 【Linux开发】为qt-embedded添加jpeg库的交叉编译方法for arm
- QT移植出错:Qt for Embedded Linux data directory has incorrect permissions: /tmp/qtembedded-0
- Qt for Embedded Linux and OpenGL
- 在嵌入式Linux及QT/Embedded-2.3.7下制作QPF字库
- Qt for ARM_Linux环境搭建-Qt5.7+iTop4412嵌入式平台移植
- Qt for Embedded Linux data directory is not owned by user xxxxh
- Qt for Embedded Linux Environment Variables
- 解决Qt for Embedded Linux data directory is not owned by user 0h 错误提示 问题
- QT/E 4.5.0 For Embedded Linux 的 bug
- Qt5.7 Qt for Embedded Linux
- Qt/Embedded在嵌入式Linux系统下的移植与应用
- fedora10 下建立Qt for Embedded linux 4.5开发环境
- Qt for Embedded Linux Environment Variables
- 在mini2440上移植qt embedded for linux 4.5.2
- 在mini2440上移植qt embedded for linux 4.5.2
- 基于Qt_Embedded的嵌入式Linux应用程序的设计
- Qt for Embedded Linux Display Management
- fedora10 下建立Qt for Embedded linux 4.5开发环境