Symantec Backup Exec 2012 Agent for Linux 卸载
2013-07-24 21:57
330 查看
本文介绍一下如何卸载Symantec Backup Exec 2012 Agent for Linx。首先我们来看看Symantec_Backup_Exec2012管理员手册的文档介绍:
卸载 Agent for Linux
1 在 Linux 服务器上,将 Backup Exec 安装介质插入相应的设备中。
2 以 root 身份登录到要从中卸载 Linux Agent 的服务器。
3 导航到 Backup Exec 安装介质上的以下目录:<LinuxUnixMac>
4 启动 uninstallralus 脚本。
例如:./uninstallralus
5 执行以下操作之一:
键入 Linux 服务器的名称、IP 地址或完全限定域名。
从一台服务器中卸载 Linux Agent
键入 Linux 服务器的名称、IP 地址或完全
限定域名。每个标识符之间留一个空格。
从多台服务器中卸载 Linux Agent
6 按 Enter。
7 成功完成 Linux Agent 软件包检查后,请按 Enter。
8 当系统提示您卸载 RALUS 软件包时,请按 Enter。
9 当系统提示您卸载 SymSnap 驱动程序时,请按 Enter。
10 要将卸载摘要保存到 Linux 服务器上的以下位置,请按 Enter:
/opt/VRTS/install/logs/uninstallralus<摘要文件编号>.summary
接下来我们来通过实践,看一看卸载Symantec Backup Exec Agent for Linux的具体操作
[root@nbooraclelnx01 BE2012]# cd /
[root@nbooraclelnx01 /]# cd /depot/os/BE2012/ralus
[root@nbooraclelnx01 ralus]# ./uninstallralus
Symantec Backup Exec Agent for Linux 14.0.1798
Enter the system names separated by spaces on which to uninstall RALUS: (nbooraclelnx01)nbooraclelnx01
Checking system communication:
Checking OS version on nbooraclelnx01 .... Linux 2.6.32-200.13.1.el5uek
Initial system check completed successfully.
Press [Return] to continue:
Symantec Backup Exec Agent for Linux 14.0.1798
Checking system uninstall requirements:
Checking RALUS uninstall requirements on Linux target systems: nbooraclelnx01
Checking RALUS installation requirements on nbooraclelnx01:
Checking VRTSralus package ........................ 14.0.1798 installed
Checking VRTSralus dependencies ....................... no dependencies
uninstallralus is now ready to uninstall RALUS packages.
Press [Return] to continue:
Symantec Backup Exec Agent for Linux 14.0.1798
Are you sure you want to uninstall RALUS packages from nbooraclelnx01? [y, n, q] (y)y
All RALUS processes that are currently running on nbooraclelnx01 will be stopped.
Stopping Symantec agent service .................................. Done
Symantec Backup Exec Agent for Linux 14.0.1798
Uninstalling Symantec Backup Exec Agent for Linux on nbooraclelnx01:
Uninstalling VRTSralus 14.0.1798 on nbooraclelnx01 ... done 1 of 1 steps
Symantec Backup Exec Agent for Linux uninstall completed successfully.
Press [Return] to continue:
Uninstalling SymSnap driver .................................... Failed
The response file is saved at:
/var/tmp/vxif/uninstallralus724121130/uninstallralus724121130.response
The uninstallralus log is saved at:
/var/tmp/vxif/uninstallralus724121130/uninstallralus.log
[root@nbooraclelnx01 ralus]#
查看卸载日志,成功卸载了Symantec Backup Exec 2012 Agent for Linx 。
[root@nbooraclelnx01 ralus]# more /var/tmp/vxif/uninstallralus724121130/uninstallralus.log
VxIF::Info:: Local System: nbooraclelnx01
VxIF::Info:: Entering Installer::prompt_for_target_systems
VxIF::Info:: Entering Installer::check_system_names
VxIF::Info:: Exiting Installer::check_system_names
VxIF::Info:: Entering Installer::initial_target_systems_check
VxIF::Info:: Entering Entered Installer::validate_target_host
VxIF::Info:: Exiting Installer::validate_target_host rc 1
VxIF::Info:: Entering RALUSLinux::check_system_names
VxIF::Info:: Exiting Installer::initial_target_systems_check
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages_ordering
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages
VxIF::Info:: Entering CPILinux::get_instpkgvers
VxIF::Info:: /bin/rpm -q --queryformat '%{VERSION}' VRTSralus 2> /dev/null
VxIF::Info:: Uninstalling RALUS on nbooraclelnx01...
VxIF::Info:: Entering RALUSLinux::pre_product_uninstall
VxIF::Info:: Entering RALUSCommon::pre_product_uninstall
VxIF::Info:: Entering RALUSCommon::_ralus_is_root_user
VxIF::Info:: Target OS name: Linux
VxIF::Info:: Checking for 'root' user during install via: /usr/bin/id -un.
VxIF::Info:: Entering RALUSLinux::_ralus_linux_shutdown_ralus
VxIF::Info:: Default init script path set to: /etc/rc.d/init.d
VxIF::Info:: Stopping Symantec agent at: /etc/rc.d/init.d/VRTSralus.init.
VxIF::Info:: Entering RALUSCommon::get_product_title
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages
VxIF::Info:: Entering CPILinux::get_instpkgvers
VxIF::Info:: /bin/rpm -q --queryformat '%{VERSION}' VRTSralus 2> /dev/null
VxIF::Info:: Uninstalling package VRTSralus 14.0.1798 on nbooraclelnx01.
VxIF::Info:: Entering ProductHelper::package_base_installer
VxIF::Info:: Entering CPICommon::pre_package_patch_uninstall
VxIF::Info:: Entering ProductHelper::package_base_installer
VxIF::Info:: Entering CPILinux::uninstall_native_package
VxIF::Info:: Entering CPILinux::get_instpkgvers
VxIF::Info:: /bin/rpm -q --queryformat '%{VERSION}' VRTSralus 2> /dev/null
VxIF::Info:: VRTSralus successfully uninstalled from nbooraclelnx01
VxIF::Info:: Entering CPICommon::post_package_patch_uninstall
VxIF::Info:: Entering ProductHelper::package_base_installer
VxIF::Info:: All packages for RALUS successfully uninstalled on nbooraclelnx01.
VxIF::Info:: Entering RALUSCommon::get_product_title
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering RALUSLinux::post_product_uninstall
VxIF::Info:: Entering RALUSLinux::_ralus_linux_remove_pkgdirs
VxIF::Info:: Entering RALUSLinux::_ralus_linux_remove_pkgdirs
VxIF::Info:: Default init script path set to:
VxIF::Info:: Executed chkconfig cmd: /sbin/chkconfig --del VRTSralus.init
VxIF::Info:: Entering RALUSLinux::_ralus_linux_uninstall_symsnap
VxIF::Info:: Copy ../scripts/Symantec_symbdsnap.bin to /var/tmp/vxif/Symantec_symbdsnap.bin
VxIF::Info:: Uninstalling SymSnap Driver result: Verifying archive integrity... All good.
Uncompressing Symantec symbdsnap, build 2.0.1-41783......................
Uninstalling Packages from the System.
Packages not installed on the System.
VxIF::Error:: ERROR: Uninstalling SymSnap Driver Failed.
VxIF::Info:: Entering RALUSCommon::get_product_title
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: RALUS successfully uninstalled on nbooraclelnx01.
卸载 Agent for Linux
1 在 Linux 服务器上,将 Backup Exec 安装介质插入相应的设备中。
2 以 root 身份登录到要从中卸载 Linux Agent 的服务器。
3 导航到 Backup Exec 安装介质上的以下目录:<LinuxUnixMac>
4 启动 uninstallralus 脚本。
例如:./uninstallralus
5 执行以下操作之一:
键入 Linux 服务器的名称、IP 地址或完全限定域名。
从一台服务器中卸载 Linux Agent
键入 Linux 服务器的名称、IP 地址或完全
限定域名。每个标识符之间留一个空格。
从多台服务器中卸载 Linux Agent
6 按 Enter。
7 成功完成 Linux Agent 软件包检查后,请按 Enter。
8 当系统提示您卸载 RALUS 软件包时,请按 Enter。
9 当系统提示您卸载 SymSnap 驱动程序时,请按 Enter。
10 要将卸载摘要保存到 Linux 服务器上的以下位置,请按 Enter:
/opt/VRTS/install/logs/uninstallralus<摘要文件编号>.summary
接下来我们来通过实践,看一看卸载Symantec Backup Exec Agent for Linux的具体操作
[root@nbooraclelnx01 BE2012]# cd /
[root@nbooraclelnx01 /]# cd /depot/os/BE2012/ralus
[root@nbooraclelnx01 ralus]# ./uninstallralus
Symantec Backup Exec Agent for Linux 14.0.1798
Enter the system names separated by spaces on which to uninstall RALUS: (nbooraclelnx01)nbooraclelnx01
Checking system communication:
Checking OS version on nbooraclelnx01 .... Linux 2.6.32-200.13.1.el5uek
Initial system check completed successfully.
Press [Return] to continue:
Symantec Backup Exec Agent for Linux 14.0.1798
Checking system uninstall requirements:
Checking RALUS uninstall requirements on Linux target systems: nbooraclelnx01
Checking RALUS installation requirements on nbooraclelnx01:
Checking VRTSralus package ........................ 14.0.1798 installed
Checking VRTSralus dependencies ....................... no dependencies
uninstallralus is now ready to uninstall RALUS packages.
Press [Return] to continue:
Symantec Backup Exec Agent for Linux 14.0.1798
Are you sure you want to uninstall RALUS packages from nbooraclelnx01? [y, n, q] (y)y
All RALUS processes that are currently running on nbooraclelnx01 will be stopped.
Stopping Symantec agent service .................................. Done
Symantec Backup Exec Agent for Linux 14.0.1798
Uninstalling Symantec Backup Exec Agent for Linux on nbooraclelnx01:
Uninstalling VRTSralus 14.0.1798 on nbooraclelnx01 ... done 1 of 1 steps
Symantec Backup Exec Agent for Linux uninstall completed successfully.
Press [Return] to continue:
Uninstalling SymSnap driver .................................... Failed
The response file is saved at:
/var/tmp/vxif/uninstallralus724121130/uninstallralus724121130.response
The uninstallralus log is saved at:
/var/tmp/vxif/uninstallralus724121130/uninstallralus.log
[root@nbooraclelnx01 ralus]#
查看卸载日志,成功卸载了Symantec Backup Exec 2012 Agent for Linx 。
[root@nbooraclelnx01 ralus]# more /var/tmp/vxif/uninstallralus724121130/uninstallralus.log
VxIF::Info:: Local System: nbooraclelnx01
VxIF::Info:: Entering Installer::prompt_for_target_systems
VxIF::Info:: Entering Installer::check_system_names
VxIF::Info:: Exiting Installer::check_system_names
VxIF::Info:: Entering Installer::initial_target_systems_check
VxIF::Info:: Entering Entered Installer::validate_target_host
VxIF::Info:: Exiting Installer::validate_target_host rc 1
VxIF::Info:: Entering RALUSLinux::check_system_names
VxIF::Info:: Exiting Installer::initial_target_systems_check
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages_ordering
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages
VxIF::Info:: Entering CPILinux::get_instpkgvers
VxIF::Info:: /bin/rpm -q --queryformat '%{VERSION}' VRTSralus 2> /dev/null
VxIF::Info:: Uninstalling RALUS on nbooraclelnx01...
VxIF::Info:: Entering RALUSLinux::pre_product_uninstall
VxIF::Info:: Entering RALUSCommon::pre_product_uninstall
VxIF::Info:: Entering RALUSCommon::_ralus_is_root_user
VxIF::Info:: Target OS name: Linux
VxIF::Info:: Checking for 'root' user during install via: /usr/bin/id -un.
VxIF::Info:: Entering RALUSLinux::_ralus_linux_shutdown_ralus
VxIF::Info:: Default init script path set to: /etc/rc.d/init.d
VxIF::Info:: Stopping Symantec agent at: /etc/rc.d/init.d/VRTSralus.init.
VxIF::Info:: Entering RALUSCommon::get_product_title
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering ProductHelper::get_product_packages
VxIF::Info:: Entering CPILinux::get_instpkgvers
VxIF::Info:: /bin/rpm -q --queryformat '%{VERSION}' VRTSralus 2> /dev/null
VxIF::Info:: Uninstalling package VRTSralus 14.0.1798 on nbooraclelnx01.
VxIF::Info:: Entering ProductHelper::package_base_installer
VxIF::Info:: Entering CPICommon::pre_package_patch_uninstall
VxIF::Info:: Entering ProductHelper::package_base_installer
VxIF::Info:: Entering CPILinux::uninstall_native_package
VxIF::Info:: Entering CPILinux::get_instpkgvers
VxIF::Info:: /bin/rpm -q --queryformat '%{VERSION}' VRTSralus 2> /dev/null
VxIF::Info:: VRTSralus successfully uninstalled from nbooraclelnx01
VxIF::Info:: Entering CPICommon::post_package_patch_uninstall
VxIF::Info:: Entering ProductHelper::package_base_installer
VxIF::Info:: All packages for RALUS successfully uninstalled on nbooraclelnx01.
VxIF::Info:: Entering RALUSCommon::get_product_title
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: Entering RALUSLinux::post_product_uninstall
VxIF::Info:: Entering RALUSLinux::_ralus_linux_remove_pkgdirs
VxIF::Info:: Entering RALUSLinux::_ralus_linux_remove_pkgdirs
VxIF::Info:: Default init script path set to:
VxIF::Info:: Executed chkconfig cmd: /sbin/chkconfig --del VRTSralus.init
VxIF::Info:: Entering RALUSLinux::_ralus_linux_uninstall_symsnap
VxIF::Info:: Copy ../scripts/Symantec_symbdsnap.bin to /var/tmp/vxif/Symantec_symbdsnap.bin
VxIF::Info:: Uninstalling SymSnap Driver result: Verifying archive integrity... All good.
Uncompressing Symantec symbdsnap, build 2.0.1-41783......................
Uninstalling Packages from the System.
Packages not installed on the System.
VxIF::Error:: ERROR: Uninstalling SymSnap Driver Failed.
VxIF::Info:: Entering RALUSCommon::get_product_title
VxIF::Info:: Entering RALUSCommon::get_product_version
VxIF::Info:: RALUS successfully uninstalled on nbooraclelnx01.
相关文章推荐
- Symantec Backup Exec 2012 Agent For Linux安装
- symantec backup exec 2012不识别新的存储设备
- 如何在安装了symantec backup exec 2012的系统中修改本地或域帐号的密码
- Symantec Backup Exec 2012 修改用户界面显示的语言
- 使用Symantec Backup Exec 对Exchange 2010 进行备份还原和灾难恢复系列之三
- Symantec Backup Exec Agent 推送错误Error connecting to the remote computer. Ensure that the computer is available, has WMI enabled and is not blocked by a firewall
- Symantec Backup exec 使用心得
- Symantec Backup exec 11D 使用心得
- Symantec Backup Exec部署手册
- Symantec Backup Exec System Recovery简明安装手册
- Symantec Backup Exec 系列三:配置存储
- symantec backup exec 介质的循环使用
- 利用symantec backup exec12.5备份与恢复exchange2003
- Symantec Backup Exec 12.5服务启动失败
- Symantec Backup Exec 安装调试备忘(二)
- O/S-Error: (OS 33) & Symantec Backup Exec 2010
- symantec backup exec 2010 部署《一》
- 使用Symantec Backup Exec 对Exchange 2010 进行备份还原和灾难恢复系列之四
- Symantec Backup Exec 12.5 For Windows Server安装配置
- 务器备份利器-Symantec Backup Exec System Recovery 2010绿色便携版 B1.0