ubuntu 更改默认的分辨率
2013-07-01 17:13
302 查看
我安装完ubuntu11.04后,分辨率是1024×768,不好看,而且从System Setting -> Monitors 进行设置也无法调上去,后面在网上看到一篇博客: http://forum.ubuntu.org.cn/viewtopic.php?f=48&t=346103 后,修改分辨率成功.
上文作者写出了自己的探索过程,我就直接写出最简单的设置方法吧:
主要过程:
1),选好自己适合分辨率,比如我的是1440×900,
终端运行:
cvt 1440 900
输出:
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
2),把这个分辨率写入配置文件:
命令:
sudo vim /etc/X11/xorg.conf 或
sudo gedit /etc/X11/xorg.conf
把下述配置写入文件:
注意:Monitor Screen Device三个Section缺一不可,下面这一行可以不要:
上文作者写出了自己的探索过程,我就直接写出最简单的设置方法吧:
主要过程:
1),选好自己适合分辨率,比如我的是1440×900,
终端运行:
cvt 1440 900
输出:
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
2),把这个分辨率写入配置文件:
命令:
sudo vim /etc/X11/xorg.conf 或
sudo gedit /etc/X11/xorg.conf
把下述配置写入文件:
Section "Monitor" Identifier "Configured Monitor" Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync Option "PreferredMode" "1440x900_60.00" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Section "Device" Identifier "Configured Video Device" EndSection
注意:Monitor Screen Device三个Section缺一不可,下面这一行可以不要:
Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
相关文章推荐
- ubuntu14.0 更改默认python为3.5 并安装tensorflow(cpu)
- Ubuntu 11.04更改分辨率
- ubuntu如何更改crontab的默认编辑器
- ubuntu16.04更改SHH默认22端口
- ubuntu10.04 默认脚本解析器更改(./sdk.unpack: 2: source: not found)
- 更改nginx默认端口,ubuntu更改nginx端口号
- ubuntu_更改ubuntu安装显卡驱动后的启动画面分辨率
- Ubuntu 16.04下 更改mysql默认编码
- 更改Ubuntu Server默认语言类型
- 在Ubuntu安装完成后更改默认的语言LANG
- ahjesus linux连接阿里云ubuntu服务器更改默认账号和密码、创建子账户的步骤
- UBUNTU 10.04 下激活framebuffer功能以及设定默认分辨率的方法
- ubuntu下更改默认python版本的方法
- ubuntu下更改mysql默认编码(字符集)
- ubuntu更改屏幕分辨率
- Ubuntu和XP双系统 grub2 默认启动项的更改 12.04
- Ubuntu更改GRUB默认启动系统
- 更改Ubuntu默认python版本的两种方法python-> Anaconda
- 更改ubuntu默认文件管理器为pcmanfm
- ubuntu10.04 默认脚本解析器更改(./sdk.unpack: 2: source: not found)