ORA-39700:DATABASE MUST BE OPENED WITH UPGRADE OPTION
2013-06-26 16:59
691 查看
ORA-01092:ORACLE INSTANCE TERMINATED DISCONNECTION
ORA-00740:BOOTSTRAP PROCESS FAILURE
ORA-39700:DATABASE MUST BE OPENED WITH UPGRADE OPTION
前几天把我的测试系统REDHAT LINUX AS4+ORACLE10.2.0.1用 oracle新发布的p6810189_10204_Linux-x86.zip升级到了10.2.0.4,然后打开数据库时打不开,并就错误:
alterlog有如下内容:
ORA-39700: database must be opened with UPGRADE option
Thu Feb 28 23:02:49 2008
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 1635
ORA-1092 signalled during: ALTER DATABASE OPEN...
按照提示,SQL>startup update
数据库可以打开,操作也正常.
但是如果关闭数据库重起后还是报以上错误,还是要加update的参数才能打开.
方法一(很遗憾使用该方法执行完第一个SQL句后 没有返回来 假死在那了)
因为数据库升级以后数据字典的内容被修改了,需要运行catalog.sql和catproc.sql这两个脚本再更新数据字典。
处理方法如下:
SQL>startup upgrade;
SQL>@ORACLE_HOME\rdbms\admin\catupgrd.sql;
这个脚本会执行比较长时间,我在虚拟机上用了快22分钟.
Total Upgrade Time: 00:21:58
执行完成以后,关闭数据库,再使用正常模式启动数据库.
再运行一下utlrp.sql这个脚本来重新编译一下一些无效的对象
SQL>startup
SQL>@ORACLE_HOME\rdbms\admin\utlrp.sql;
...
OBJECTS WITH ERRORS
-------------------
0
...
ERRORS DURING RECOMPILATION
方法二 这里使用migrate 启动选项 并且执行最后一个SQL语句
升级分为2个步骤:安装升级包、升级数据库
升级数据库步骤:
1、sqlplus 登录 /as sysdba
2、确认版本:select * from v$version
3、shutdown immediate后再startup migrate(迁移模式)
4、运行DB补丁脚本升级DB:SQL> @$ORACLE_HOME/rdbms/admin/catpatch.sql
方法三 使用图形工具
Log in as the Oracle software owner user.
Set the values for the environment variables
For single-instance installations, if you are using Automatic Storage Management, start the Automatic Storage Management instance.
For Oracle single-instance installations, start the
Run Oracle Database Upgrade Assistant either in the interactive or noninteractive mode:
Interactive mode:
Enter the following command from the command prompt:
On the Welcome screen, click Next.
On the Databases screen, select the name of the Oracle Database that you want to update, then click Next.
On the Recompile Invalid Objects screen, select the Recompile the invalid objects at the end of upgrade option, then click Next.
If you have not taken the back up of the database earlier, on the
On the Summary screen, check the summary, then click Finish.
On the End of Database Upgrade Assistant's Upgrade Results screen, click Close to exit from Oracle Database Upgrade Assistant.
Noninteractive mode:
Enter the following command to upgrade Oracle Database using Oracle Database Upgrade Assistant in noninteractive mode:
If you are using the Oracle Recovery Manager catalog, enter the following command:
For Oracle RAC installations, start any database services that you want to use by entering the following command:
ORA-00740:BOOTSTRAP PROCESS FAILURE
ORA-39700:DATABASE MUST BE OPENED WITH UPGRADE OPTION
前几天把我的测试系统REDHAT LINUX AS4+ORACLE10.2.0.1用 oracle新发布的p6810189_10204_Linux-x86.zip升级到了10.2.0.4,然后打开数据库时打不开,并就错误:
alterlog有如下内容:
ORA-39700: database must be opened with UPGRADE option
Thu Feb 28 23:02:49 2008
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 1635
ORA-1092 signalled during: ALTER DATABASE OPEN...
按照提示,SQL>startup update
数据库可以打开,操作也正常.
但是如果关闭数据库重起后还是报以上错误,还是要加update的参数才能打开.
方法一(很遗憾使用该方法执行完第一个SQL句后 没有返回来 假死在那了)
因为数据库升级以后数据字典的内容被修改了,需要运行catalog.sql和catproc.sql这两个脚本再更新数据字典。
处理方法如下:
SQL>startup upgrade;
SQL>@ORACLE_HOME\rdbms\admin\catupgrd.sql;
这个脚本会执行比较长时间,我在虚拟机上用了快22分钟.
Total Upgrade Time: 00:21:58
执行完成以后,关闭数据库,再使用正常模式启动数据库.
再运行一下utlrp.sql这个脚本来重新编译一下一些无效的对象
SQL>startup
SQL>@ORACLE_HOME\rdbms\admin\utlrp.sql;
...
OBJECTS WITH ERRORS
-------------------
0
...
ERRORS DURING RECOMPILATION
方法二 这里使用migrate 启动选项 并且执行最后一个SQL语句
升级分为2个步骤:安装升级包、升级数据库
升级数据库步骤:
1、sqlplus 登录 /as sysdba
2、确认版本:select * from v$version
3、shutdown immediate后再startup migrate(迁移模式)
4、运行DB补丁脚本升级DB:SQL> @$ORACLE_HOME/rdbms/admin/catpatch.sql
方法三 使用图形工具
.3.1 Upgrading a Release 10.2 Database using Oracle Database Upgrade Assistant
After you install the patch set, you must perform the following steps on every database associated with the upgraded Oracle home:Note:If you do not run the Oracle Database Upgrade Assistant as described in this section, then the following errors are displayed: ORA-01092: ORACLE instance terminated. ORA-39700: database must be opened with UPGRADE option. |
Log in as the Oracle software owner user.
Set the values for the environment variables
$ORACLE_HOME,
$ORACLE_SIDand
$PATH.
For single-instance installations, if you are using Automatic Storage Management, start the Automatic Storage Management instance.
For Oracle single-instance installations, start the
listeneras follows:
$ lsnrctl start
Run Oracle Database Upgrade Assistant either in the interactive or noninteractive mode:
Interactive mode:
Enter the following command from the command prompt:
$ dbuaComplete the following steps displayed in the Oracle Database Upgrade Assistant screen:
On the Welcome screen, click Next.
On the Databases screen, select the name of the Oracle Database that you want to update, then click Next.
Note:For Oracle RAC, enter the SYSpassword to do the upgrade. |
On the Recompile Invalid Objects screen, select the Recompile the invalid objects at the end of upgrade option, then click Next.
If you have not taken the back up of the database earlier, on the
Backupscreen, select the I would like to take this tool to backup the database option, stipulate the Path, then click Next.
On the Summary screen, check the summary, then click Finish.
On the End of Database Upgrade Assistant's Upgrade Results screen, click Close to exit from Oracle Database Upgrade Assistant.
Note:If you are upgrading a database having dbcontrol configured in non-secure mode, after upgrade dbconsole will run in secure mode. |
Noninteractive mode:
Enter the following command to upgrade Oracle Database using Oracle Database Upgrade Assistant in noninteractive mode:
$ dbua -silent -dbname $ORACLE_SID -oracleHome $ORACLE_HOME -sysDBAUserName UserName -sysDBAPassword SYS_password -recompile_invalid_objects true
If you are using the Oracle Recovery Manager catalog, enter the following command:
$ rman catalog username/password@alias RMAN> UPGRADE CATALOG;
For Oracle RAC installations, start any database services that you want to use by entering the following command:
$ srvctl start service -d db_name -s service_name
相关文章推荐
- ORACLE11.2.0.4 版本升级ORA-39700: database must be opened with UPGRADE option问题解决记录
- ORA-39700:database must be opened with UPGRADE option
- ORA-39700: database must be opened with UPGRADE option
- ORA-39700: database must be opened with UPGRADE option
- ORA-39700: database must be opened with UPGRADE option
- ORA-39700: database must be opened with UPGRADE option
- 数据库升级问题—ORA-39700: database must be opened with UPGRADE option
- ORA-00704: bootstrap process failure ORA-39700: database must be opened with UPGRADE option
- ORA-39700:DATABASE MUST BE OPENED WITH UPGRADE OPTION
- ORA-39700: database must be opened with UPGRADE option【转】
- ORA-39700: database must be opened with UPGRADE option
- ORA-16433: The database must be opened in read/write mode
- 64-bit mex files using sparse matrices must be rebuilt with the "-largeArrayDims" option.
- ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
- ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
- “ORA-01589:must use RESETLOGS or NORESETLOGS option for database open”
- ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
- Database Upgrade to 12c ebs,JDeveloper Connections Fail With Error "ORA-28040
- 64-bit mex files using sparse matrices must be rebuilt with the "-largeArrayDims" option.
- ORA-30078: partition bound must be TIME/TIMESTAMP WITH TIME ZONE literals