Multimedia Standards Introduction——Profiles/Levels

Profiles

The standard defines 21 sets of capabilities, which are referred to as profiles, targeting specific classes of applications.

Profiles for non-scalable 2D video applications include the following:

Constrained Baseline Profile (CBP)Primarily for low-cost applications, this profile is most typically used in videoconferencing and mobile applications. It corresponds to the subset of features that are in common between the Baseline, Main,
and High Profiles.

Baseline Profile (BP)Primarily for low-cost applications that require additional data loss robustness, this profile is used in some videoconferencing and mobile applications. This profile includes all features that are supported in the Constrained
Baseline Profile, plus three additional features that can be used for loss robustness (or for other purposes such as low-delay multi-point video stream compositing). The importance of this profile has faded somewhat since the definition of the Constrained
Baseline Profile in 2009. All Constrained Baseline Profile bitstreams are also considered to be Baseline Profile bitstreams, as these two profiles share the same profile identifier code value.

Main Profile (MP)This profile is used for standard-definition digital TV broadcasts that use the MPEG-4 format as defined in the DVB standard.[30] It is not, however,
used for high-definition television broadcasts, as the importance of this profile faded when the High Profile was developed in 2004 for that application.Extended Profile (XP)Intended as the streaming video profile, this profile has relatively high compression
capability and some extra tricks for robustness to data losses and server stream switching.

Extended Profile (XP)Intended as the streaming video profile, this profile has relatively high compression capability and some extra tricks for robustness to data losses and server stream switching.

High Profile (HiP)The primary profile for broadcast and disc storage applications, particularly for high-definition television applications (for example, this is the profile adopted by the Blu-ray
Discstorage format and the DVB HDTV broadcast service).

Progressive High Profile (PHiP)Similar to the High profile, but without support of field coding features.Constrained High ProfileSimilar to the Progressive High profile, but without support of B (bi-predictive) slices.

High 10 Profile (Hi10P)Going beyond typical mainstream consumer product capabilities, this profile builds on top of the High Profile, adding support for up to 10 bits per sample of decoded picture precision.

High 4:2:2 Profile (Hi422P)Primarily targeting professional applications that use interlaced video, this profile builds on top of the High 10 Profile, adding support for the 4:2:2 chroma
subsampling format while using up to 10 bits per sample of decoded picture precision.

High 4:4:4 Predictive Profile (Hi444PP)This profile builds on top of the High 4:2:2 Profile, supporting up to 4:4:4 chroma sampling, up to 14 bits per sample, and additionally supporting efficient lossless region coding and the coding of each
picture as three separate color planes. For camcorders, editing, and professional applications, the standard contains four additional Intra-frame-only profiles, which are defined as simple subsets of other
corresponding profiles. These are mostly for professional (e.g., camera and editing system) applications:

High 10 Intra Profile The High 10 Profile constrained to all-Intra use.

High 4:2:2 Intra Profile The High 4:2:2 Profile constrained to all-Intra use.

High 4:4:4 Intra Profile The High 4:4:4 Profile constrained to all-Intra use.

CAVLC 4:4:4 Intra Profile The High 4:4:4 Profile constrained to all-Intra use and to CAVLC entropy coding (i.e., not supporting CABAC). As a result of the Scalable Video Coding (SVC)
extension, the standard contains five additional scalable profiles, which are defined as a combination of a H.264/AVC profile for the base layer (identified by the second word in the scalable profile name) and tools that
achieve the scalable extension:

Scalable Baseline Profile Primarily targeting video conferencing, mobile, and surveillance applications, this profile builds on top of the Constrained Baseline profile to which the base layer (a subset of the bitstream) must conform. For the
scalability tools, a subset of the available tools is enabled.

Scalable Constrained Baseline ProfileA subset of the Scalable Baseline Profile intended primarily for real-time communication applications.


Scalable High Profile Primarily targeting broadcast and streaming applications, this profile builds on top of the H.264/AVC High Profile to which the base layer must conform.

Scalable Constrained High ProfileA subset of the Scalable High Profile intended primarily for real-time communication applications.

Scalable High Intra Profile Primarily targeting production applications, this profile is the Scalable High Profile constrained to all-Intra use. As a result of the Multiview Video
Coding (MVC) extension, the standard contains two multiview profiles:

Stereo High Profile This profile targets two-view stereoscopic 3D video and combines the tools of the High profile with the inter-view prediction capabilities of the MVC extension.

Multiview High Profile This profile supports two or more views using both inter-picture (temporal) and MVC inter-view prediction, but does not support field pictures and macroblock-adaptive frame-field coding.

• Feature support in particular profiles

Feature	CBP	BP	XP	MP	ProHiP	HiP	Hi10P	Hi422P	Hi444PP
Chroma formats	4:2:0	4:2:0	4:2:0	4:2:0	4:2:0	4:2:0	4:2:0	4:2:0/4:2:2	4:2:0/4:2:2/4:4:4
Sample depths (bits)	8	8	8	8	8	8	8 to 10	8 to 10	8 to 14
Flexible macroblock ordering (FMO)	No	Yes	Yes	No	No	No	No	No	No
Arbitrary slice ordering (ASO)	No	Yes	Yes	No	No	No	No	No	No
Redundant slices (RS)	No	Yes	Yes	No	No	No	No	No	No
Data Partitioning	No	No	Yes	No	No	No	No	No	No
SI and SP slices	No	No	Yes	No	No	No	No	No	No
Interlaced coding (PicAFF, MBAFF)	No	No	Yes	Yes	No	Yes	Yes	Yes	Yes
B slices	No	No	Yes	Yes	Yes	Yes	Yes	Yes	Yes
CABAC entropy coding	No	No	No	Yes	Yes	Yes	Yes	Yes	Yes
8×8 vs. 4×4 transform adaptivity	No	No	No	No	Yes	Yes	Yes	Yes	Yes
Quantization scaling matrices	No	No	No	No	Yes	Yes	Yes	Yes	Yes
Separate Cb and Cr QP control	No	No	No	No	Yes	Yes	Yes	Yes	Yes
Monochrome (4:0:0)	No	No	No	No	Yes	Yes	Yes	Yes	Yes
Separate color plane coding	No	No	No	No	No	No	No	No	Yes
Predictive lossless coding	No	No	No	No	No	No	No	No	Yes

Levels

As the term is used in the standard, a "level" is a specified set of constraints that indicate a degree of required decoder performance for a profile. For example, a level of support within a profile specifies the
maximum picture resolution, frame rate, and bit rate that a decoder may use. A decoder that conforms to a given level must be able to decode all bitstreams encoded for that level and all lower levels.

• Levels with maximum property values