如何建立你的第一个linux模块驱动

转载：http://www.cyberciti.biz/tips/compiling-linux-kernel-module.html

This is one the essential and important task. Many time we upgrade our kernel and some precompiled drivers won't work with Linux. Especially if you have weird hardware; then vendor may send you driver code aka C files to compile. Or even you can write your
own Linux kernel driver. Compiling kernel driver is easy. Kernel 2.6.xx makes it even much more easier. Following steps are required to compile driver as module:

1) You need running kernel source code; if you don't have a source code download it from
kernel.org. Untar kernel source code (tar ball) in /usr/src using tar command:

$ tar -zxvf kernel* -C /usr/src

To be frank kernel headers are more than sufficient to compile kernel modules / drivers. See how to install kernel headers under
Debian / Ubuntu Linux or

RHEL / CentOS / Fedora Linux.

2) Next go to your kernel module source code directory and simply create the Makefile file as follows (assuming your kernel module name is foo):

$ vi Makefile

3) Add following text to it:

obj-m = foo.o
KVERSION = $(shell uname -r)
all:
make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(KVERSION)/build M=$(PWD) clean

4) Compile module using make command (module build can be done by any user) :

$ make

It will finally creates the foo.ko module in current directory. You can see all actual compile command stored in .foo* files in same directory.

5) Once module compiled successfully, load it using insmod or modprobe command. You need to be root user or privileged user to run insmod:

# insmod foo.ko

Example: hello.c module

1) hello.c C source code. Copy following code and save to hello.c

$ mkdir demo; cd demo

$ vi hello.c

2)Add following c source code to it:

#include <linux/module.h>       /* Needed by all modules */
#include <linux/kernel.h>       /* Needed for KERN_INFO */
#include <linux/init.h>         /* Needed for the macros */
static int __init hello_start(void)
{
printk(KERN_INFO "Loading hello module...\n");
printk(KERN_INFO "Hello world\n");
return 0;
}
static void __exit hello_end(void)
{
printk(KERN_INFO "Goodbye Mr.\n");
}
module_init(hello_start);
module_exit(hello_end);

This is an example modified from original
source for demonstration purpose.

3) Save the file. Create new Makefile as follows:

$ vi Makefile

Append following make commands:

obj-m = hello.o
KVERSION = $(shell uname -r)
all:
make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(KVERSION)/build M=$(PWD) clean

4) Save and close the file.

5) Compile hello.c module:

$ make

6) Become a root user (use su or sudo) and load the module:

$ su -

# insmod hello.ko

Note you can see message on screen if you are logged in as root under run level 3.

7) Verify that module loaded:

# lsmod | less

8) See message in /var/log/message file:

# tail -f /var/log/message

9) Unload the module:

# rmmod hello

10) Load module when Linux system comes up. File /etc/modules use to load kernel boot time. This file should contain the names of kernel modules that are to be loaded at boot time, one per line. First copy your module to /lib/modules/$(uname -r)/kernel/drivers.
Following are suggested steps:

(a) Create directory for hello module:

# mkdir -p /lib/modules/$(uname -r)/kernel/drivers/hello

(b) Copy module:

# cp hello.ko /lib/modules/$(uname -r)/kernel/drivers/hello/

(c) Edit /etc/modules file under Debian Linux:

# vi /etc/modules

(d) Add following line to it:

hello

(e) Reboot to see changes. Use lsmod or dmesg command to verify module loaded or not.

# cat /proc/modules

OR

# lsmod | less

See also:

Read man pages of lsmod, rmmod, modprobe, modules
Documentation located in your kernel source directory (for example /usr/src/linux-2.6.xx.xx/Documentation/) and README file located under kernel source code tree /usr/src/linux-2.6.xx.xx/README
Read TLDP.org tutorial online.