glib交叉编译及常见问题(uclibc,arm)
2013-04-13 16:39
302 查看
gentoo有使用uclibc编译glib2.6.2的补丁文件,虽然有些老
http://dev.gentoo.org/~solar/embedded/local/local/dev-libs/glib-uclibc/
关于configure配置程序的补丁,glib-2.4.6-config.path的内容:
主要就是将原来出错后的退出处理改为消息显示而不退出,在目前的glib版本(2.6.34),
跟AS_MSG_ERROR对应的函数是as_fn_error, 后面那个AC_MSG_RESULT大可以改为简单的echo来处理。
关于libiconv库相关文件的补丁,glib-2.4.6-no_iconv.patch
由于年代久远,这些patch文件不能直接拿来使用,但对比后手动更改即可。
运行配置脚本:
./configure --with-libiconv=no --enable-gcov=no --host=arm-xxx --cache-file=arm-configure.cache
其中的--host参数指定你要使用的交叉编译器的前缀(比如文中的arm-xxx,它补成arm-xxx-gcc)
--cache-file参数指定配置信息缓存文件(配置脚本会从中读取,并会写入参数)
常见错误:
1、“configure: error: cannot run test program while cross compiling”
很多检测选项都会生成这条消息,比如:
checking for growing stack pointer... configure: error: in `/mnt/openlib/glib2.0-2.34.1':
这时候可以打开configure脚本文件,查找“for growing stack pointer”,
可以定位具体的出错地点,按照开头提到的修改configure的方法将其出错信息屏蔽即可。
如果需要指定参数,可以手动将要检测的变量值追加到参数中附带的cache文件,比如这条错误信息可以:
echo "glib_cv_stack_grows=${glib_cv_stack_grows=no}" >>arm-configure.cache
在./configure时在命令行参数指定也可以:
./configure xxxxxx glib_cv_stack_grows=no
2、libintl.h的包含错误
编译glib(不包含gobject、gthread、gio==)时起码会报错找不到这个头文件,比如在ggettext.c中
可以按如下方式修改:
其中的glibintl.h是对libintl.h的一个替换方案
3、glibintl.h带来的问题
比如,编译gkeyfile.c:
gkeyfile.c: In function `g_key_file_get_locale_string':
gkeyfile.c:2190: error: syntax error before '!=' token
在glibintl.h中,bind_textdomain_codeset只是个空定义,没有返回值
参考修改方式如下
附:
./configure --with-libiconv=no --enable-gcov=no --host=arm-xxx-linux
--cache-file=xx.cache
--enable-static --disable-dependency-tracking glib_cv_stack_grows=no ac_cv_func_posix_getpwuid_r=yes ac_cv_func_posix_getgrgid_r=yes ac_cv_lib_rt_clock_gettime=no glib_cv_monotonic_clock=yes
http://dev.gentoo.org/~solar/embedded/local/local/dev-libs/glib-uclibc/
关于configure配置程序的补丁,glib-2.4.6-config.path的内容:
--- configure.in.orig 2004-11-07 22:12:27.000000000 +0000 +++ configure.in 2004-11-07 22:11:58.000000000 +0000 @@ -373,7 +373,7 @@ esac if test "x$found_iconv" = "xno" ; then - AC_MSG_ERROR([*** No iconv() implementation found in C library or libiconv]) + AC_MSG_RESULT([*** No iconv() implementation found in C library or libiconv. Using stubs]) fi dnl @@ -384,7 +384,7 @@ GLIB_GNU_GETTEXT if test "$gt_cv_have_gettext" != "yes" ; then - AC_MSG_ERROR([ + AC_MSG_RESULT([*** For some unknown reason somebody thinks *** *** You must have either have gettext support in your C library, or use the *** GNU gettext library. (http://www.gnu.org/software/gettext/gettext.html ])
主要就是将原来出错后的退出处理改为消息显示而不退出,在目前的glib版本(2.6.34),
跟AS_MSG_ERROR对应的函数是as_fn_error, 后面那个AC_MSG_RESULT大可以改为简单的echo来处理。
关于libiconv库相关文件的补丁,glib-2.4.6-no_iconv.patch
--- glib/gconvert.c.mps Tue Sep 21 21:19:41 2004 +++ glib/gconvert.c Tue Sep 21 21:18:01 2004 @@ -22,7 +22,9 @@ #include "config.h" +#ifdef HAVE_ICONV_H #include <iconv.h> +#endif #include <errno.h> #include <stdio.h> #include <string.h> @@ -49,6 +49,24 @@ #error GNU libiconv not in use but included iconv.h is from libiconv #endif +#ifndef HAVE_ICONV_H +typedef void *iconv_t; + +static iconv_t iconv_open(const char *tocode, const char *fromcode) +{ + return (iconv_t)(-1); +} + +static int iconv_close(iconv_t cd) +{ + free(cd); + + return 0; +} + +static size_t iconv() {return 0;} +#endif + GQuark g_convert_error_quark (void) {
由于年代久远,这些patch文件不能直接拿来使用,但对比后手动更改即可。
运行配置脚本:
./configure --with-libiconv=no --enable-gcov=no --host=arm-xxx --cache-file=arm-configure.cache
其中的--host参数指定你要使用的交叉编译器的前缀(比如文中的arm-xxx,它补成arm-xxx-gcc)
--cache-file参数指定配置信息缓存文件(配置脚本会从中读取,并会写入参数)
常见错误:
1、“configure: error: cannot run test program while cross compiling”
很多检测选项都会生成这条消息,比如:
checking for growing stack pointer... configure: error: in `/mnt/openlib/glib2.0-2.34.1':
这时候可以打开configure脚本文件,查找“for growing stack pointer”,
可以定位具体的出错地点,按照开头提到的修改configure的方法将其出错信息屏蔽即可。
如果需要指定参数,可以手动将要检测的变量值追加到参数中附带的cache文件,比如这条错误信息可以:
echo "glib_cv_stack_grows=${glib_cv_stack_grows=no}" >>arm-configure.cache
在./configure时在命令行参数指定也可以:
./configure xxxxxx glib_cv_stack_grows=no
2、libintl.h的包含错误
编译glib(不包含gobject、gthread、gio==)时起码会报错找不到这个头文件,比如在ggettext.c中
可以按如下方式修改:
#ifdef ENABLE_NLS #include <libintl.h> #else #include "glibintl.h" #endif
其中的glibintl.h是对libintl.h的一个替换方案
3、glibintl.h带来的问题
比如,编译gkeyfile.c:
gkeyfile.c: In function `g_key_file_get_locale_string':
gkeyfile.c:2190: error: syntax error before '!=' token
在glibintl.h中,bind_textdomain_codeset只是个空定义,没有返回值
#define bind_textdomain_codeset(Domain,Codeset)
参考修改方式如下
#ifdef HAVE_BIND_TEXTDOMAIN_CODESET codeset_set = bind_textdomain_codeset (key_file->gettext_domain, "UTF-8") != NULL; #else codeset_set = FALSE; #endif
附:
./configure --with-libiconv=no --enable-gcov=no --host=arm-xxx-linux
--cache-file=xx.cache
--enable-static --disable-dependency-tracking glib_cv_stack_grows=no ac_cv_func_posix_getpwuid_r=yes ac_cv_func_posix_getgrgid_r=yes ac_cv_lib_rt_clock_gettime=no glib_cv_monotonic_clock=yes
相关文章推荐
- eclipse 远程图形化调试嵌入式linux c arm(beaglebone black),解决常见调试问题
- linux常见问题之常用的几条arm命令
- [DSP+ARM] DSP开发常见问题
- 交叉编译场景分析(arm-linux)(八)--编译glib
- ubuntu16.04LTS下载安装arm-linux-gcc 4.4.3过程常见问题
- ARM系统设计JTAG接口常见问题
- DSP+ARM] DSP开发常见问题
- 交叉编译场景分析(arm-linux)(八)--编译glib
- 【推荐】ARM JTAG调试常见问题
- 国嵌ARM 上学期专题3之汇编语言玩得转 常见问题解决方案和知识点总结
- centos安装arm交叉工具链后常见的问题解决
- ARM应用笔记网址和常见问题
- ARM 常见问题
- 无线龙armrf_st911_bs板子常见问题
- 【opencv交叉编译问题】用arm-linux-gnueabihf-gcc编译程序无法执行
- 【推荐】ARM JTAG调试常见问题
- Kinetis ARM Cortex-M4 的一些常见问题
- ARM 常见问题
- ubuntu 16.04 LTS安装arm-linux-gcc步骤及常见问题
- SQLite常见问题解答(1)