Error: debugging information for project.exe' cannot be found or does not match. No symbols loade

在vs2008下调试程序出现了：

Debugging information for '***.exe' cannot be found or does not match. Symbols not loaded.

首先问了一下百老师：

To enable debugging:

1) Goto Project->HelloWorld Properties

2) On the left expand "Configuration Properties"

3) Expand "C/C++"

4) On the left, Select "General"

5) On the right, change "Debug Information Format" to "Program Database For Edit And Continue (/ZI)"

5) On the left, Select "Optimization"

6) On the right, change "Optimization" to "Disabled (/Od)"

7) On the left, expand "Linker"

8) On the left, select "Debugging"

9) On the right, change "Generate Debug Info" to "Yes"

10) Click ok

11) Set your breakpoints

12) Rebuild your application

Also when running your application use Ctrl+F5 to build and run it, this keeps the console window open long enough for you to see your output.

解决未果！！！

去必应上上查查................

在csdn一位仁兄的博客上写到：

right click on your preject, select properties, chose debuggin tab on the left column, and change the debug type to "manage only"

右击工程->属性->debugging->debugger type,choose 'manage only'

问题解决！！！！

我的项目工程->属性->debugging->debugger
type,choose ‘Auto' 改成'manage
only'就ok了

前期删.suo文件
.ncb文件 设置属性 折腾了好久都没有解决！

特此记录
以后遇到这样的问题自己就不会忘记了

参考网站：

http://www.cnblogs.com/RoahnLuo/archive/2009/03/15/1412503.html

还有关于#include "stdafx.h"头文件问题。

当程序是自己写的，然后添加到工程里的。就在c/c++中选择Precompiled Headers：Not Using Precompiled Headers