linux mint13 android使用错误修改记录
2013-03-26 10:21
441 查看
android4.0 在我的115里面,下载,修改 .mp3 为.tar.zg,解压并编译,收集错误如下:
如果有人需要可以留言,留下邮箱。
********************************************************************************************
问题 1、
CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
CC kernel/bounds.s
cc1: error: unrecognized command line option "-mlittle-endian"
cc1: error: unrecognized command line option "-mapcs"
cc1: error: unrecognized command line option "-mno-sched-prolog"
cc1: error: unrecognized command line option "-mabi=apcs-gnu"
kernel/bounds.c:1: error: bad value (armv4t) for -march= switch
kernel/bounds.c:1: error: bad value (arm9tdmi) for -mtune= switch
类似问题 解决办法
make ARCH=arm CROSS_COMPILE='编译器位置'
由于是再pc x86环境下编译所以修改为:ARCH=x86 CROSS_COMPILE=
没有交叉编译器的话,可以随便下载一个,我们是模拟的仅仅是学习一下所以无所谓了。
********************************************************************************************
问题2、
CC kernel/cgroup_freezer.o
CC kernel/cpuset.o
kernel/cpuset.c: In function ‘cpuset_can_attach’:
kernel/cpuset.c:1386:18: error: ‘task’ undeclared (first use in this function)
kernel/cpuset.c:1386:18: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [kernel/cpuset.o] Error 1
make: *** [kernel] Error 2
解决办法
在kernel/cpuset.c:1380 将task 改成tsk
即:task -->tsk
********************************************************************************************
问题3、
drivers/hello/hello.c:233:2: error: implicit declaration of function ‘init_MUTEX’
解决方法: 注释掉drivers/hello/hello.c:init_MUTEX(&(dev->sem));
********************************************************************************************
问题4、
used [-Wunused-function]
CC [M] drivers/gpio/sch_gpio.o
CC [M] drivers/gpio/rdc321x-gpio.o
CC [M] drivers/gpio/janz-ttl.o
drivers/gpio/janz-ttl.c: In function ‘ttl_set_value’:
drivers/gpio/janz-ttl.c:107:2: error: implicit declaration of function ‘iowrite16be’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [drivers/gpio/janz-ttl.o] Error 1
make[1]: *** [drivers/gpio] Error 2
make: *** [drivers] Error 2
解决方法:
解决方法:
leo linux-2.6.36-android # grep -r Werror=implicit-function-declaration . //搜索错误提示
./arch/arm/kernel/asm-offsets.s:@ -Werror=implicit-function-declaration -Wno-format-security
./kernel/bounds.s:@ -Werror=implicit-function-declaration -Wno-format-security
leo linux-2.6.36-android #
修改:1、将-Werror=implicit-function-declaration -Wno-format-security // 将错误提示删掉,像做手术一样哪里出问题,切哪里,
从/arch/arm/kernel/asm-offsets.s:@ -Werror=implicit-function-declaration -Wno-format-security中删掉
删除位置:@ -Wundef -Wstrict-prototypes -Wno-trigraphs
@ -Werror=implicit-function-declaration -Wno-format-security
@ -Wframe-larger-than=1024 -Wdeclaration-after-statement -Wno-pointer-sign
2、将-Werror=implicit-function-declaration -Wno-format-security
从/kernel/bounds.中删掉
删除位置:@ -Wundef -Wstrict-prototypes -Wno-trigraphs
@ -Werror=implicit-function-declaration -Wno-format-security
@ -Wframe-larger-than=1024 -Wdeclaration-after-statement -Wno-pointer-sign
以上方法都是了,还是不可以,然后找到这个错误是出现在janz-ttl这个模块,由于我们这时第一次编译这个系统,可能用不到这个模块,为了下一步的进展我就在janz-ttl目录里的makefile里面将这个模块屏蔽了。
补充:
2 在函数所在的c文件中定义了,但是没有在与之相关联的.h文件中声明
这个问题没有解决 换成了x86环境 继续编译
********************************************************************************************
问题5、此错误是在x86环境下编译(即:ARCH=x86
CROSS_COMPILE=)出现的错误:
VDSO arch/x86/vdso/vdso.so.dbg
gcc: error: elf_x86_64: No such file or directory
OBJCOPY arch/x86/vdso/vdso.so
objcopy: 'arch/x86/vdso/vdso.so.dbg': No such file
make[2]: *** [arch/x86/vdso/vdso.so] Error 1
make[1]: *** [arch/x86/vdso] Error 2
make: *** [arch/x86] Error 2
leo linux-2.6.36-android #
解决方法:
这个问题是由于 gcc 4.6 不再支持 linker-style 架构。讲 arch/x86/vdso/Makefile中,
将以 VDSO_LDFLAGS_vdso.lds 开头所在行的 "-m elf_x86_64" 替换为 "-m64"。 (只修改这一步,就可以了)
将以 VDSO_LDFLAGS_vdso32.lds 开头所在行的 "-m elf_x86" 替换为 "-m32"。
********************************************************************************************
问题6、
drivers/misc/pmem.c:1226:2: warning: (near initialization for ‘debug_fops.open’) [enabled by default]
drivers/misc/pmem.c: In function ‘pmem_setup’:
drivers/misc/pmem.c:1301:60: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
cc1: some warnings being treated as errors
make[2]: *** [drivers/misc/pmem.o] Error 1
make[1]: *** [drivers/misc] Error 2
make: *** [drivers] Error 2
leo linux-2.6.36-android #
解决方法:
********************************************************************************************
问题7、
首先,看一下详细的错误信息,如下所示:
Your display is too small to runMenuconfig!
It must be at least 19 lines by 80 columns.
其次,看一下解决方案:先把你终端的窗体最大化再执行相同的命令,是不是感觉很奇妙?
********************************************************************************************
问题8、
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/lib/jvm/java-1.6.0_27/bin:/home/test1/WORKING_DIRECTORY/out/host/linux-x86/bin"
CLASSPATH="/usr/lib/jvm/java-1.6.0_27/lib"
JAVA_HOME="/usr/lib/jvm/java-1.6.0_27"
ANDROID_PRODUCT_OUT="/home/test1/WORKING_DIRECTORY/out/target/product/generic"
注意:修改这个后为使之生效需要logout一下。
另外,android模拟器第一次启动时间超长,需要耐心等待
********************************************************************************************
第9- 是编译android4.0出现错误(android4.0 在我的115里面,下载,修改 .mp3 为.tar.zg,解压并编译,编译环境:linux mint13 64位):
问题9、
<built-in>:0:0: note: this is the location of the previous definition
host StaticLib: libOpenglCodecCommon (out/host/linux-x86/obj/STATIC_LIBRARIES/li
bOpenglCodecCommon_intermediates/libOpenglCodecCommon.a)
host SharedLib: libOpenglRender (out/host/linux-x86/obj/lib/libOpenglRender.so)
/usr/bin/ld: cannot find -lX11
collect2: ld returned 1 exit status
make: *** [out/host/linux-x86/obj/lib/libOpenglRender.so] Error 1
解决方法:$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
********************************************************************************************
问题10、
<built-in>:0:0: note: this is the location of the previous definition
host StaticLib: libOpenglCodecCommon (out/host/linux-x86/obj/STATIC_LIBRARIES/li
bOpenglCodecCommon_intermediates/libOpenglCodecCommon.a)
host SharedLib: libOpenglRender (out/host/linux-x86/obj/lib/libOpenglRender.so)
/usr/bin/ld: cannot find -lX11
collect2: ld returned 1 exit status
make: *** [out/host/linux-x86/obj/lib/libOpenglRender.so] Error 1
解决方法:$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
********************************************************************************************
问题11、
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined [enabled by default]
<built-in>:0:0: note: this is the location of the previous definition cc1plus: all warnings being treated as errors
make: *** [out/host/linux-x86/obj/EXECUTABLES/obbtool_intermediates/Main.o] Error 1
解决方法:这是由于11.10的gcc版本过高造成的,可参考这篇文章修改:http://hi.baidu.com/designhouse/blog/item/fec5cdbf8d6a231618d81fc1.html。
或者修改build/core/combo/HOST_linux-x86.mk 61行
将 HOST_GLOBAL_CFLAGS += -D_FORTIFY_SOURCE=0
修改成 HOST_GLOBAL_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0
********************************************************************************************
问题12、
g++: g++: selected multilib '32' not installed
解决方法:
apt-get install g++-4.4-multilib
********************************************************************************************
问题13、
host StaticLib: libGLcommon (out/host/linux-x86/obj/STATIC_LIBRARIES/libGLcommon
_intermediates/libGLcommon.a)
host SharedLib: libGLES_CM_translator (out/host/linux-x86/obj/lib/libGLES_CM_tra
nslator.so)
/usr/bin/ld: cannot find -lGL
collect2: ld returned 1 exit status
make: *** [out/host/linux-x86/obj/lib/libGLES_CM_translator.so] Error 1
解决方法: sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2 /usr/lib/libGL.so
********************************************************************************************
问题14、
CC [M] drivers/gpio/wm8350-gpiolib.o
CC [M] drivers/gpio/wm8994-gpio.o
drivers/gpio/wm8994-gpio.c:84: warning: 'wm8994_gpio_to_irq' defined but not used
CC [M] drivers/gpio/sch_gpio.o
CC [M] drivers/gpio/rdc321x-gpio.o
CC [M] drivers/gpio/janz-ttl.o
drivers/gpio/janz-ttl.c: In function 'ttl_set_value':
drivers/gpio/janz-ttl.c:107: error: implicit declaration of function 'iowrite16be'
make[2]: *** [drivers/gpio/janz-ttl.o] Error 1
make[1]: *** [drivers/gpio] Error 2
make: *** [drivers] Error 2
leo common # make menuconfig
由于升级或者其他原因会出现 implicit declaration of function错误,前面也提过一些原因。但对于我们没有用到模块可以直接删掉。
解决方法:
在drivers/gpio/中的makefile和kconfig中屏蔽wm8994-gpio.o
或者使用make menuconfig 菜单 删除。
********************************************************************************************
问题15、
编译内核出现
In file included from fs/coda/psdev.c:45:
include/linux/coda.h:248: error: expected specifier-qualifier-list before 'u_quad_t'错误。
解决方法:
在内核配置中有如下
File Systems ->
-> Network File Systems ->
-> <M> Coda file system support (advanced network fs)
选项,取消选择Coda file system support,重新编译。
根据老罗的博客编译好了android环境,可以运气模拟器了,
以下是再模拟器下的错误:
16、
执行 emulator 提示 emulator: WARNING: system partition size adjusted to match image file (166 MB > 66 MB)
解决方法:
emulator -partition-size 1024 -kernel ./kernel/common/arch/arm/boot/zImage &
如果有人需要可以留言,留下邮箱。
ubuntu 下编译android源码错误解决记录
Ubuntu12.064位源码编译Android4.0
第一次make报错:********************************************************************************************
问题 1、
CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
CC kernel/bounds.s
cc1: error: unrecognized command line option "-mlittle-endian"
cc1: error: unrecognized command line option "-mapcs"
cc1: error: unrecognized command line option "-mno-sched-prolog"
cc1: error: unrecognized command line option "-mabi=apcs-gnu"
kernel/bounds.c:1: error: bad value (armv4t) for -march= switch
kernel/bounds.c:1: error: bad value (arm9tdmi) for -mtune= switch
类似问题 解决办法
make ARCH=arm CROSS_COMPILE='编译器位置'
由于是再pc x86环境下编译所以修改为:ARCH=x86 CROSS_COMPILE=
没有交叉编译器的话,可以随便下载一个,我们是模拟的仅仅是学习一下所以无所谓了。
********************************************************************************************
问题2、
CC kernel/cgroup_freezer.o
CC kernel/cpuset.o
kernel/cpuset.c: In function ‘cpuset_can_attach’:
kernel/cpuset.c:1386:18: error: ‘task’ undeclared (first use in this function)
kernel/cpuset.c:1386:18: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [kernel/cpuset.o] Error 1
make: *** [kernel] Error 2
解决办法
在kernel/cpuset.c:1380 将task 改成tsk
即:task -->tsk
********************************************************************************************
问题3、
drivers/hello/hello.c:233:2: error: implicit declaration of function ‘init_MUTEX’
解决方法: 注释掉drivers/hello/hello.c:init_MUTEX(&(dev->sem));
********************************************************************************************
问题4、
used [-Wunused-function]
CC [M] drivers/gpio/sch_gpio.o
CC [M] drivers/gpio/rdc321x-gpio.o
CC [M] drivers/gpio/janz-ttl.o
drivers/gpio/janz-ttl.c: In function ‘ttl_set_value’:
drivers/gpio/janz-ttl.c:107:2: error: implicit declaration of function ‘iowrite16be’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [drivers/gpio/janz-ttl.o] Error 1
make[1]: *** [drivers/gpio] Error 2
make: *** [drivers] Error 2
解决方法:
down voteaccepted | Try including this header#include<asm/io.h>[/code] If it doesn't work then look at this for all the definitions of iowrite16be http://lxr.free-electrons.com/ident?i=iowrite16be Choose the appropriate header based on your architecture. EDIT : Generally implicit declaration of function xyz()is a warning. May be in your system its been forced to an error with -Werror-implicit-function-declaration. You can search for this in your build structure and try to take it off ( Though itsnot a good practice, but anyways you can do it, if you want the work done ) But if iowrite16beis really missing, then even this method wont help you from the linker's wrath.
| ||||||
|
leo linux-2.6.36-android # grep -r Werror=implicit-function-declaration . //搜索错误提示
./arch/arm/kernel/asm-offsets.s:@ -Werror=implicit-function-declaration -Wno-format-security
./kernel/bounds.s:@ -Werror=implicit-function-declaration -Wno-format-security
leo linux-2.6.36-android #
修改:1、将-Werror=implicit-function-declaration -Wno-format-security // 将错误提示删掉,像做手术一样哪里出问题,切哪里,
从/arch/arm/kernel/asm-offsets.s:@ -Werror=implicit-function-declaration -Wno-format-security中删掉
删除位置:@ -Wundef -Wstrict-prototypes -Wno-trigraphs
@ -Werror=implicit-function-declaration -Wno-format-security
@ -Wframe-larger-than=1024 -Wdeclaration-after-statement -Wno-pointer-sign
2、将-Werror=implicit-function-declaration -Wno-format-security
从/kernel/bounds.中删掉
删除位置:@ -Wundef -Wstrict-prototypes -Wno-trigraphs
@ -Werror=implicit-function-declaration -Wno-format-security
@ -Wframe-larger-than=1024 -Wdeclaration-after-statement -Wno-pointer-sign
以上方法都是了,还是不可以,然后找到这个错误是出现在janz-ttl这个模块,由于我们这时第一次编译这个系统,可能用不到这个模块,为了下一步的进展我就在janz-ttl目录里的makefile里面将这个模块屏蔽了。
补充:
implicit declaration of function 这种警告问题的原因及解决方法
1 没有把函数所在的c文件生成.o目标文件2 在函数所在的c文件中定义了,但是没有在与之相关联的.h文件中声明
这个问题没有解决 换成了x86环境 继续编译
********************************************************************************************
问题5、此错误是在x86环境下编译(即:ARCH=x86
CROSS_COMPILE=)出现的错误:
VDSO arch/x86/vdso/vdso.so.dbg
gcc: error: elf_x86_64: No such file or directory
OBJCOPY arch/x86/vdso/vdso.so
objcopy: 'arch/x86/vdso/vdso.so.dbg': No such file
make[2]: *** [arch/x86/vdso/vdso.so] Error 1
make[1]: *** [arch/x86/vdso] Error 2
make: *** [arch/x86] Error 2
leo linux-2.6.36-android #
解决方法:
这个问题是由于 gcc 4.6 不再支持 linker-style 架构。讲 arch/x86/vdso/Makefile中,
将以 VDSO_LDFLAGS_vdso.lds 开头所在行的 "-m elf_x86_64" 替换为 "-m64"。 (只修改这一步,就可以了)
将以 VDSO_LDFLAGS_vdso32.lds 开头所在行的 "-m elf_x86" 替换为 "-m32"。
********************************************************************************************
问题6、
drivers/misc/pmem.c:1226:2: warning: (near initialization for ‘debug_fops.open’) [enabled by default]
drivers/misc/pmem.c: In function ‘pmem_setup’:
drivers/misc/pmem.c:1301:60: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
cc1: some warnings being treated as errors
make[2]: *** [drivers/misc/pmem.o] Error 1
make[1]: *** [drivers/misc] Error 2
make: *** [drivers] Error 2
leo linux-2.6.36-android #
解决方法:
********************************************************************************************
问题7、
Your display is too small to run Menuconfig
因工作需要,现在要编译Ubuntu系统的内核。在编译的过程中,遇到“Your display is too small to run Menuconfig”的问题,刚遇到时一阵紧张,怎么又出问题呢?后来,搜索之后一颗悬着的心才算落下。首先,看一下详细的错误信息,如下所示:
Your display is too small to runMenuconfig!
It must be at least 19 lines by 80 columns.
其次,看一下解决方案:先把你终端的窗体最大化再执行相同的命令,是不是感觉很奇妙?
********************************************************************************************
问题8、
android 4.0.1源码编译成功后运行emulator提示No command 'emulator' found
1、编辑/etc/environment增加emulator所在目录(增加蓝色字体内容):PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/lib/jvm/java-1.6.0_27/bin:/home/test1/WORKING_DIRECTORY/out/host/linux-x86/bin"
CLASSPATH="/usr/lib/jvm/java-1.6.0_27/lib"
JAVA_HOME="/usr/lib/jvm/java-1.6.0_27"
ANDROID_PRODUCT_OUT="/home/test1/WORKING_DIRECTORY/out/target/product/generic"
注意:修改这个后为使之生效需要logout一下。
另外,android模拟器第一次启动时间超长,需要耐心等待
********************************************************************************************
第9- 是编译android4.0出现错误(android4.0 在我的115里面,下载,修改 .mp3 为.tar.zg,解压并编译,编译环境:linux mint13 64位):
问题9、
<built-in>:0:0: note: this is the location of the previous definition
host StaticLib: libOpenglCodecCommon (out/host/linux-x86/obj/STATIC_LIBRARIES/li
bOpenglCodecCommon_intermediates/libOpenglCodecCommon.a)
host SharedLib: libOpenglRender (out/host/linux-x86/obj/lib/libOpenglRender.so)
/usr/bin/ld: cannot find -lX11
collect2: ld returned 1 exit status
make: *** [out/host/linux-x86/obj/lib/libOpenglRender.so] Error 1
解决方法:$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
********************************************************************************************
问题10、
<built-in>:0:0: note: this is the location of the previous definition
host StaticLib: libOpenglCodecCommon (out/host/linux-x86/obj/STATIC_LIBRARIES/li
bOpenglCodecCommon_intermediates/libOpenglCodecCommon.a)
host SharedLib: libOpenglRender (out/host/linux-x86/obj/lib/libOpenglRender.so)
/usr/bin/ld: cannot find -lX11
collect2: ld returned 1 exit status
make: *** [out/host/linux-x86/obj/lib/libOpenglRender.so] Error 1
解决方法:$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
********************************************************************************************
问题11、
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined [enabled by default]
<built-in>:0:0: note: this is the location of the previous definition cc1plus: all warnings being treated as errors
make: *** [out/host/linux-x86/obj/EXECUTABLES/obbtool_intermediates/Main.o] Error 1
解决方法:这是由于11.10的gcc版本过高造成的,可参考这篇文章修改:http://hi.baidu.com/designhouse/blog/item/fec5cdbf8d6a231618d81fc1.html。
或者修改build/core/combo/HOST_linux-x86.mk 61行
将 HOST_GLOBAL_CFLAGS += -D_FORTIFY_SOURCE=0
修改成 HOST_GLOBAL_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0
********************************************************************************************
问题12、
g++: g++: selected multilib '32' not installed
解决方法:apt-get install g++-4.4-multilib
********************************************************************************************
问题13、
host StaticLib: libGLcommon (out/host/linux-x86/obj/STATIC_LIBRARIES/libGLcommon
_intermediates/libGLcommon.a)
host SharedLib: libGLES_CM_translator (out/host/linux-x86/obj/lib/libGLES_CM_tra
nslator.so)
/usr/bin/ld: cannot find -lGL
collect2: ld returned 1 exit status
make: *** [out/host/linux-x86/obj/lib/libGLES_CM_translator.so] Error 1
解决方法: sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2 /usr/lib/libGL.so
********************************************************************************************
问题14、
CC [M] drivers/gpio/wm8350-gpiolib.o
CC [M] drivers/gpio/wm8994-gpio.o
drivers/gpio/wm8994-gpio.c:84: warning: 'wm8994_gpio_to_irq' defined but not used
CC [M] drivers/gpio/sch_gpio.o
CC [M] drivers/gpio/rdc321x-gpio.o
CC [M] drivers/gpio/janz-ttl.o
drivers/gpio/janz-ttl.c: In function 'ttl_set_value':
drivers/gpio/janz-ttl.c:107: error: implicit declaration of function 'iowrite16be'
make[2]: *** [drivers/gpio/janz-ttl.o] Error 1
make[1]: *** [drivers/gpio] Error 2
make: *** [drivers] Error 2
leo common # make menuconfig
由于升级或者其他原因会出现 implicit declaration of function错误,前面也提过一些原因。但对于我们没有用到模块可以直接删掉。
解决方法:
在drivers/gpio/中的makefile和kconfig中屏蔽wm8994-gpio.o
或者使用make menuconfig 菜单 删除。
********************************************************************************************
问题15、
编译内核出现
In file included from fs/coda/psdev.c:45:
include/linux/coda.h:248: error: expected specifier-qualifier-list before 'u_quad_t'错误。
解决方法:
在内核配置中有如下
File Systems ->
-> Network File Systems ->
-> <M> Coda file system support (advanced network fs)
选项,取消选择Coda file system support,重新编译。
根据老罗的博客编译好了android环境,可以运气模拟器了,
以下是再模拟器下的错误:
16、
执行 emulator 提示 emulator: WARNING: system partition size adjusted to match image file (166 MB > 66 MB)
解决方法:
emulator -partition-size 1024 -kernel ./kernel/common/arch/arm/boot/zImage &
相关文章推荐
- linux mint13 android使用错误修改记录
- 使用VS2005编译freetype的动态链接库--我加了一些错误修改的记录
- 解决使用records = store.getModifiedRecords(),records.length 长度错误,得到上次修改记录。commitChanges()
- 错误记录:使用了mysql_affected_rows修改方法的返回值判断要>0
- android开发中ADB使用记录
- 【原创】Android之修改AlertDialog对话框及使用系统Holo风格
- spring中使用context:property-placeholder错误记录
- Android开发全程记录(十)——使用新浪微博授权登录和分享注意事项
- Android 当修改一些代码时,使用什么编译命令可以最有效率
- 记录:realm和高德地图同时使用时的错误
- Android 中使用IDE为Android Studio时候,后台类型从double 改成 int,但是客户端还是显示double问题(JAVA修改Model类型,但是无效)
- 【Android】Facebook SDK使用调试过程记录
- 【Android开发经验】LayoutInflater——Android程序员对它并不了解甚至错误使用
- 使用Tortoise SVN版本控制Eclipse工作区的Android项目时,bin编译错误
- Android中使用jsoup对网页数据的抓取和修改
- 新建Android项目时使用project from existing source导入已经存在的项目报 AndroidManifest.xml file missing错误解决方案
- C#使用List出现“集合已修改;可能无法执行枚举操作”错误的解决办法
- Android使用Gradle命令动态传参完成打包,不需要修改代码
- 使用自治事务记录日志的错误信息
- Android2.3异步双屏修改记录之部分测试结果