linux下查看硬盘型号等信息
2013-03-21 11:44
357 查看
在准备替换或加装硬盘时,如何得到硬盘信息?
可以用smartctl,hdparm等命令来查询。
在日志中显示硬盘有坏扇区
tail /var/log/messages
Mar 1 09:42:55 c1g smartd[1848]: Device: /dev/hda, 2 Currently unreadable (pending) sectors
Mar 1 09:42:55 c1g smartd[1848]: Device: /dev/hda, 2 Offline uncorrectable sectors
dmesg中也有错误信息
dmesg
ide: failed opcode was: unknown
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
对硬盘做一下健康检查
smartctl -H /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
检测通过,保险起见还是准备换硬盘。
查看下当前硬盘的型号,可以得到硬盘接口为SATAII,及尺寸大小3.5"
smartctl -a /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3160815AS
Serial Number: 6RA7DWM4
Firmware Version: 4.AAB
User Capacity: 160,040,803,840 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Mar 1 10:36:55 2010 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
hdparm也可以得到硬盘型号
hdparm -i /dev/hda
/dev/hda:
Model=ST3160815AS, FwRev=4.AAB, SerialNo=6RA7DWM4
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
也可以通过主板型号来得知支持的硬盘
dmidecode
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: 945GCM-S2L
主页:http://smartmontools.sourceforge.net/
Centos安装:
yum -y install smartmontools
smartctl
-i 指定设备
-d 指定设备类型,例如:ata, scsi, marvell, sat, 3ware,N
-a 或A 显示所有信息
-l 指定日志的类型,例如:TYPE: error, selftest, selective, directory,background, scttemp[sts,hist]
-H 查看硬盘健康状态
-t short 后台检测硬盘,消耗时间短
-t long 后台检测硬盘,消耗时间长
-C -t short 前台检测硬盘,消耗时间短
-C -t long 前台检测硬盘,消耗时间长
-X 中断后台检测硬盘
-l selftest 显示硬盘检测日志
HP硬盘:
smartctl -s on -d cciss,0 /dev/cciss/c0d0 开启SMART
smartctl -a -d cciss,0 -i /dev/cciss/c0d0 显示所有SMART信息
smartctl -l error -d cciss,0 -i /dev/cciss/c0d0 查看磁盘错误日志
+++++++++++++++++++++++smarted服务+++++++++++++++++
简单说下smartctl:smartd由kernel-utils包缺省安装。用命令 rpm -ql kernel-utils 可以列出kernel-utils包中的文件
它是一个守护进程(一个帮助程序),它能监视拥有自我监视,分析和汇报技术(Self-Monitoring, Analysis, and Reporting Technology - SMART)的硬盘。
主配置文件:/etc/smartd.conf
添加一行/dev/cciss/c0d0 -H -m sys@5iqiong.com
上边的配置表示smartd以静默状态工作,当SMART中报告PASSED的时候不理睬一旦出现Failure
linux下利用命令查看显卡型号
lspci |grep VGA
可以用smartctl,hdparm等命令来查询。
在日志中显示硬盘有坏扇区
tail /var/log/messages
Mar 1 09:42:55 c1g smartd[1848]: Device: /dev/hda, 2 Currently unreadable (pending) sectors
Mar 1 09:42:55 c1g smartd[1848]: Device: /dev/hda, 2 Offline uncorrectable sectors
dmesg中也有错误信息
dmesg
ide: failed opcode was: unknown
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
对硬盘做一下健康检查
smartctl -H /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
检测通过,保险起见还是准备换硬盘。
查看下当前硬盘的型号,可以得到硬盘接口为SATAII,及尺寸大小3.5"
smartctl -a /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3160815AS
Serial Number: 6RA7DWM4
Firmware Version: 4.AAB
User Capacity: 160,040,803,840 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Mar 1 10:36:55 2010 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
hdparm也可以得到硬盘型号
hdparm -i /dev/hda
/dev/hda:
Model=ST3160815AS, FwRev=4.AAB, SerialNo=6RA7DWM4
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
也可以通过主板型号来得知支持的硬盘
dmidecode
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: 945GCM-S2L
/dev/hd~ ==> IDE /dev/sd~ ==> SCSI、SATA、USB、FLASH /dev/md~ ==> RAID 至于RAID大小要看系统及文件系统的支持了。
smartctl使用详解:
功能:可以查看生产厂商、型号、序列号、容量、是否支持SMART、开启否主页:http://smartmontools.sourceforge.net/
Centos安装:
yum -y install smartmontools
smartctl
-i 指定设备
-d 指定设备类型,例如:ata, scsi, marvell, sat, 3ware,N
-a 或A 显示所有信息
-l 指定日志的类型,例如:TYPE: error, selftest, selective, directory,background, scttemp[sts,hist]
-H 查看硬盘健康状态
-t short 后台检测硬盘,消耗时间短
-t long 后台检测硬盘,消耗时间长
-C -t short 前台检测硬盘,消耗时间短
-C -t long 前台检测硬盘,消耗时间长
-X 中断后台检测硬盘
-l selftest 显示硬盘检测日志
HP硬盘:
smartctl -s on -d cciss,0 /dev/cciss/c0d0 开启SMART
smartctl -a -d cciss,0 -i /dev/cciss/c0d0 显示所有SMART信息
smartctl -l error -d cciss,0 -i /dev/cciss/c0d0 查看磁盘错误日志
+++++++++++++++++++++++smarted服务+++++++++++++++++
简单说下smartctl:smartd由kernel-utils包缺省安装。用命令 rpm -ql kernel-utils 可以列出kernel-utils包中的文件
它是一个守护进程(一个帮助程序),它能监视拥有自我监视,分析和汇报技术(Self-Monitoring, Analysis, and Reporting Technology - SMART)的硬盘。
主配置文件:/etc/smartd.conf
添加一行/dev/cciss/c0d0 -H -m sys@5iqiong.com
上边的配置表示smartd以静默状态工作,当SMART中报告PASSED的时候不理睬一旦出现Failure
linux下利用命令查看显卡型号
lspci |grep VGA
相关文章推荐
- linux下查看硬盘型号等信息
- linux下查看硬盘型号等信息
- linux查看主板型号及内存硬件信息,及硬盘测速
- Linux/centos下查看网卡型号,如何查看主板型号,CPU/显卡信息,硬盘型号等硬件信息
- linux 下查看硬件信息(mac,IP地址,硬盘型号,序列号等)
- linux 下查看硬件信息(mac,IP地址,硬盘型号,序列号等)
- linux下查看硬盘型号等信息
- linux 下查看硬盘型号、大小等信息(含Raid)
- Linux下查看CPU、内存和硬盘型号及相关信息命令
- 在Linux/centos下查看网卡型号,如何查看主板型号,CPU/显卡信息,硬盘型号等硬件信息
- linux下查看硬盘型号、大小等信息(含Raid)
- 在Linux/centos下查看网卡型号,如何查看主板型号,CPU/显卡信息,硬盘型号等硬件信息
- linux下如何查看硬盘型号等信息
- Linux查看主板型号及硬件信息
- Linux命令学习(3)—— fdisk -l 查看硬盘及分区信息
- Linux 查看CPU信息,机器型号,内存等信息
- 查看硬盘的型号信息
- linux 下如何查看机器硬盘型号、块数
- Linux 查看CPU信息、机器型号等硬件信息
- Linux查看硬盘型号