北邮2012年复试上机题目
2013-03-20 14:18
447 查看
前言
每次让我看到北邮的上机题目不管当时多忙我都必须把它们ac,原因是当年北邮复试,上机题目竟然一道也没有做出来,旁边一同学还抱怨和我坐一起连个讨论的人都没有!唉,往事不堪回首,这里记录一下2012年北邮上机的题目吧,每年复试前才会放出上一年的上机题目二进制数
题目
题目描述: 大家都知道,数据在计算机里中存储是以二进制的形式存储的。 有一天,小明学了C语言之后,他想知道一个类型为unsigned int 类型的数字,存储在计算机中的二进制串是什么样子的。 你能帮帮小明吗?并且,小明不想要二进制串中前面的没有意义的0串,即要去掉前导0。 输入: 第一行,一个数字T(T<=1000),表示下面要求的数字的个数。 接下来有T行,每行有一个数字n(0<=n<=10^8),表示要求的二进制串。 输出: 输出共T行。每行输出求得的二进制串。 样例输入: 5 23 535 2624 56275 989835 样例输出: 10111 1000010111 101001000000 1101101111010011 11110001101010001011
ac代码
没什么可说的,简单的机制转换,连大数除法都没考察!#include <stdio.h> #include <string.h> #include <stdlib.h> struct stack { int top; int data[100]; }; void convert_to_binary(struct stack *s, unsigned long int d) { s->top = 0; while (d) { s->data[s->top ++] = d % 2; d /= 2; } while (s->top) { printf("%d", s->data[-- s->top]); } printf("\n"); } int main() { int i, n; unsigned long int d; struct stack *s = (struct stack*)malloc(sizeof(struct stack)); while (scanf("%d", &n) != EOF) { for (i = 0; i < n; i ++) { scanf("%ld", &d); if (d != 0) { convert_to_binary(s, d); }else { printf("0\n"); } } } return 0; } /************************************************************** Problem: 1473 User: wangzhengyi Language: C Result: Accepted Time:10 ms Memory:904 kb ****************************************************************/
二叉排序树
题目
题目描述: 二叉排序树,也称为二叉查找树。可以是一颗空树,也可以是一颗具有如下特性的非空二叉树: 1. 若左子树非空,则左子树上所有节点关键字值均不大于根节点的关键字值; 2. 若右子树非空,则右子树上所有节点关键字值均不小于根节点的关键字值; 3. 左、右子树本身也是一颗二叉排序树。 现在给你N个关键字值各不相同的节点,要求你按顺序插入一个初始为空树的二叉排序树中,每次插入后成功后,求相应的父亲节点的关键字值,如果没有父亲节点,则输出-1。 输入: 输入包含多组测试数据,每组测试数据两行。 第一行,一个数字N(N<=100),表示待插入的节点数。 第二行,N个互不相同的正整数,表示要顺序插入节点的关键字值,这些值不超过10^8。 输出: 输出共N行,每次插入节点后,该节点对应的父亲节点的关键字值。 样例输入: 5 2 5 1 3 4 样例输出: -1 2 2 5 3
ac代码
没什么思路,最简单的构建二叉排序树而已#include <stdio.h> #include <stdlib.h> #include <string.h> struct btree { struct btree *lchild, *rchild; unsigned long int data; }; struct btree* create_btree(struct btree *t, unsigned long int d, unsigned long int parent); int main() { int i, n; unsigned long int d; struct btree *t; while (scanf("%d", &n) != EOF) { t = NULL; for (i = 0; i < n; i ++) { scanf("%ld", &d); t = create_btree(t, d, -1); } } return 0; } struct btree* create_btree(struct btree *t, unsigned long int d, unsigned long int parent) { if (t == NULL) { t = (struct btree *)malloc(sizeof(struct btree)); t->data = d; t->lchild = NULL; t->rchild = NULL; printf("%ld\n", parent); }else if(t->data > d) { t->lchild = create_btree(t->lchild, d, t->data); }else if(t->data < d) { t->rchild = create_btree(t->rchild, d, t->data); }else { exit(EXIT_FAILURE); } return t; } /************************************************************** Problem: 1467 User: wangzhengyi Language: C Result: Accepted Time:10 ms Memory:904 kb ****************************************************************/
矩阵幂
题目
题目描述: 给定一个n*n的矩阵,求该矩阵的k次幂,即P^k。 输入: 输入包含多组测试数据。 数据的第一行为一个整数T(0<T<=10),表示要求矩阵的个数。 接下来有T组测试数据,每组数据格式如下: 第一行:两个整数n(2<=n<=10)、k(1<=k<=5),两个数字之间用一个空格隔开,含义如上所示。 接下来有n行,每行n个正整数,其中,第i行第j个整数表示矩阵中第i行第j列的矩阵元素Pij且(0<=Pij<=10)。另外,数据保证最后结果不会超过10^8。 输出: 对于每组测试数据,输出其结果。格式为: n行n列个整数,每行数之间用空格隔开,注意,每行最后一个数后面不应该有多余的空格。 样例输入: 3 2 2 9 8 9 3 3 3 4 8 4 9 3 0 3 5 7 5 2 4 0 3 0 1 0 0 5 8 5 8 9 8 5 3 9 6 1 7 8 7 2 5 7 3 样例输出: 153 96 108 81 1216 1248 708 1089 927 504 1161 1151 739 47 29 41 22 16 147 103 73 116 94 162 108 153 168 126 163 67 112 158 122 152 93 93 111 97
ac代码
这个也是挺简单的,就是个矩阵乘法,三个for循环即可#include <stdio.h> #include <stdlib.h> #include <string.h> #define LEN 15 int a[LEN][LEN], b[LEN][LEN], c[LEN][LEN]; void multiplay_matrix(); int main() { int t, n, k, i, j, d; scanf("%d", &t); while (t --) { // 接收矩阵 scanf("%d %d", &n, &k); for (i = 0; i < n; i ++) { for (j = 0; j < n; j ++) { scanf("%d", &d); a[i][j] = d; b[i][j] = d; c[i][j] = d; } } // 矩阵的幂 if (k != 1) { multiplay_matrix(k, n); } for (i = 0; i < n; i ++) { for (j = 0; j < n; j ++) { if (j == n - 1) { printf("%d\n", c[i][j]); }else { printf("%d ", c[i][j]); } } } } return 0; } void multiplay_matrix(int k, int n) { int i, j, h, data; k --; while (k --) { for (i = 0; i < n; i ++) { for (j = 0; j < n; j ++) { for (h = data = 0; h < n; h ++) { data += b[i][h] * a[h][j]; } c[i][j] = data; } } for (i = 0; i < n; i ++) { for (j = 0; j < n; j ++) { b[i][j] = c[i][j]; } } } } /************************************************************** Problem: 1474 User: wangzhengyi Language: C Result: Accepted Time:10 ms Memory:912 kb ****************************************************************/
IP数据包解析
题目
头部长度单位为4字节。 你的任务是,简要分析输入数据中的若干个TCP数据段的头部。 详细要求请见输入输出部分的说明。 输入: 第一行为一个整数T,代表测试数据的组数。 以下有T行,每行都是一个TCP数据包的头部分,字节用16进制表示,以空格隔开。数据保证字节之间仅有一个空格,且行首行尾没有多余的空白字符。 保证输入数据都是合法的。 输出: 对于每个TCP数据包,输出如下信息: Case #x,x是当前测试数据的序号,从1开始。 Total length = L bytes,L是整个IP数据包的长度,单位是1字节。 Source = xxx.xxx.xxx.xxx,用点分十进制输出源IP地址。输入数据中不存在IPV6数据分组。 Destination = xxx.xxx.xxx.xxx,用点分十进制输出源IP地址。输入数据中不存在IPV6数据分组。 Source Port = sp,sp是源端口号。 Destination Port = dp,dp是目标端口号。 对于每个TCP数据包,最后输出一个多余的空白行。 具体格式参见样例。 请注意,输出的信息中,所有的空格、大小写、点符号、换行均要与样例格式保持一致,并且不要在任何数字前输出多余的前导0,也不要输出任何不必要的空白字符。 样例输入: 2 45 00 00 34 7a 67 40 00 40 06 63 5a 0a cd 0a f4 7d 38 ca 09 cd f6 00 50 b4 d7 ae 1c 9b cf f2 40 80 10 ff 3d fd d0 00 00 01 01 08 0a 32 53 7d fb 5e 49 4e c8 45 00 00 c6 56 5a 40 00 34 06 e0 45 cb d0 2e 01 0a cd 0a f4 00 50 ce 61 e1 e9 b9 ee 47 c7 37 34 80 18 00 b5 81 8f 00 00 01 01 08 0a 88 24 fa c6 32 63 cd 8d 样例输出: Case #1 Total length = 52 bytes Source = 10.205.10.244 Destination = 125.56.202.9 Source Port = 52726 Destination Port = 80 Case #2 Total length = 198 bytes Source = 203.208.46.1 Destination = 10.205.10.244 Source Port = 80 Destination Port = 52833
ac代码
注意取源端口号和目的端口号时需要注意ip头部长度的判断,IHL,其它就没神马难度了#include <stdio.h> #include <stdlib.h> #include <string.h> #define LEN 1000 int change_tint(char *str, int begin, int num) { int i; char *temp = (char *)malloc(sizeof(char) * (num + 1)); for(i = 0; i < num; i ++) { temp[i] = str[begin + i]; } temp[i] = '\0'; return strtol(temp, NULL, 16); } void ip_field(char *str, int begin, int num) { int i, flag, ip; for (i = 0, flag = 1; i < num; i += 2) { ip = change_tint(str, begin + i, 2); printf("%d", ip); if (flag <= 3) { printf("."); flag ++; } } printf("\n"); } int main() { int index, i, j, n, length, ihl; char ipstr[LEN], temp[LEN]; while (scanf("%d\n", &n) != EOF) { if (n != 0) { for (index = 1; index <= n; index ++) { memset(ipstr, 0, sizeof(ipstr)); memset(temp, 0, sizeof(temp)); gets(temp); // 去除空格 for (i = j = 0, length = strlen(temp); i < length; i ++) { if (temp[i] != ' ') { ipstr[j ++] = temp[i]; } } ipstr[j] = '\0'; // 当前测试数据的序号 printf("Case #%d\n", index); // 整个ip数据包的长度 length = change_tint(ipstr, 4, 4); printf("Total length = %d bytes\n", length); // 源ip地址和目的ip地址 printf("Source = "); ip_field(ipstr, 24, 8); printf("Destination = "); ip_field(ipstr, 32, 8); // 源端口号和目的端口号 ihl = change_tint(ipstr, 1, 1) * 4 * 2; printf("Source Port = %d\n", change_tint(ipstr, ihl, 4)); printf("Destination Port = %d\n", change_tint(ipstr, ihl + 4, 4)); printf("\n"); } } } return 0; } /************************************************************** Problem: 1475 User: wangzhengyi Language: C Result: Accepted Time:10 ms Memory:908 kb ****************************************************************/
后记
2011年北邮复试一道上机题都不会做的我,现在两年后确实秒杀北邮的这些复试上机题,总共加调试差不多花了一个半小时,不过2012年北邮计算机院复试题目确实没神马难度!相关文章推荐
- 北邮2012年复试上机题目
- 2010北邮复试上机网研题目A
- 2010北邮复试上机网研的题目:(1)
- 2010北邮复试上机网研题目B
- 2010北邮复试上机网研题目C
- 北邮考研复试C语言上机题目精选
- 计算机研究生复试上机题目:顺时针螺旋矩阵简单实现
- 2010北邮复试网研上机题
- 2007浙大复试上机考试题目6--最大报销额
- 还是畅通工程(2006浙江大学研究生上机复试题目[最小生成树] hdoj 1233)
- 2016北邮计算机考研复试上机题解
- 2010北邮复试网研上机题
- 北理工2012年计算机研究生复试上机题
- 2014年北邮计算机上机题目一
- 北邮2018计算机院考研复试上机题解+结果统计
- 北邮2011网研复试上机题——复数集合
- 浙大复试上机题目解答(1)
- 北邮2011网研复试上机题——复数集合
- 2010北邮复试网研上机题——打牌
- 浙大复试上机题目解答(2)