Mac----开启SVN服务
2012-12-27 21:55
281 查看
Mac自带了SVN服务,只要我们配置一下就可以使用了。
创建svn repository
2. 配置svn用户权限/Users/user/Tools/DevelopTools/svn/repository/conf/目录下存在3个文件:authz、passwd、svnserve.confauthz,内容如下:
authz文件:
passwd文件:
svnserve.conf文件:
以上红色部分表示需要更改得地方,请注意!
3. 启动SVN服务
之后,你想干嘛就可以干嘛了!
本文参考:http://wicrewoft.blog.51cto.com/210706/1031831
http://www.2cto.com/os/201211/167999.html
创建svn repository
svnadmin create /Users/user/Tools/DevelopTools/svn/repository
2. 配置svn用户权限/Users/user/Tools/DevelopTools/svn/repository/conf/目录下存在3个文件:authz、passwd、svnserve.confauthz,内容如下:
authz文件:
### This file is an example authorization file for svnserve. ### Its format is identical to that of mod_authz_svn authorization ### files. ### As shown below each section defines authorizations for the path and ### (optional) repository specified by the section name. ### The authorizations follow. An authorization line can refer to: ### - a single user, ### - a group of users defined in a special [groups] section, ### - an alias defined in a special [aliases] section, ### - all authenticated users, using the '$authenticated' token, ### - only anonymous users, using the '$anonymous' token, ### - anyone, using the '*' wildcard. ### ### A match can be inverted by prefixing the rule with '~'. Rules can ### grant read ('r') access, read-write ('rw') access, or no access ### (''). [aliases] # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average [groups] user_group = user # harry_and_sally = harry,sally # harry_sally_and_joe = harry,sally,&joe [/] user=rw # &joe = r * = # [repository:/baz/fuz] # @harry_and_sally = rw # * = r
passwd文件:
### This file is an example password file for svnserve. ### Its format is similar to that of svnserve.conf. As shown in the ### example below it contains one section labelled [users]. ### The name and password for each user follow, one account per line. [users] # harry = harryssecret # sally = sallyssecret user=123456
svnserve.conf文件:
### This file controls the configuration of the svnserve daemon, if you ### use it to allow access to this repository. (If you only allow ### access through http: and/or file: URLs, then this file is ### irrelevant.) ### Visit http://subversion.apache.org/ for more information. [general] ### These options control access to the repository for unauthenticated ### and authenticated users. Valid values are "write", "read", ### and "none". The sample settings below are the defaults. anon-access = read auth-access = write ### The password-db option controls the location of the password ### database file. Unless you specify a path starting with a /, ### the file's location is relative to the directory containing ### this configuration file. ### If SASL is enabled (see below), this file will NOT be used. ### Uncomment the line below to use the default password file. password-db = passwd ### The authz-db option controls the location of the authorization ### rules for path-based access control. Unless you specify a path ### starting with a /, the file's location is relative to the the ### directory containing this file. If you don't specify an ### authz-db, no path-based access control is done. ### Uncomment the line below to use the default authorization file. authz-db = authz ### This option specifies the authentication realm of the repository. ### If two repositories have the same authentication realm, they should ### have the same password database, and vice versa. The default realm ### is repository's uuid. # realm = My First Repository [sasl] ### This option specifies whether you want to use the Cyrus SASL ### library for authentication. Default is false. ### This section will be ignored if svnserve is not built with Cyrus ### SASL support; to check, run 'svnserve --version' and look for a line ### reading 'Cyrus SASL authentication is available.' # use-sasl = true ### These options specify the desired strength of the security layer ### that you want SASL to provide. 0 means no encryption, 1 means ### integrity-checking only, values larger than 1 are correlated ### to the effective key length for encryption (e.g. 128 means 128-bit ### encryption). The values below are the defaults. # min-encryption = 0 # max-encryption = 256
以上红色部分表示需要更改得地方,请注意!
3. 启动SVN服务
svnserve -d -r /Users/user/Tools/DevelopTools/svn/repository/
之后,你想干嘛就可以干嘛了!
本文参考:http://wicrewoft.blog.51cto.com/210706/1031831
http://www.2cto.com/os/201211/167999.html
相关文章推荐
- Mac OS X NTP 服务开启与关闭
- 「mac」开启ssh服务(转)
- 在mac上创建svn服务
- Mac如何开启ssh服务
- Mac搭建本地局域网SVN服务(Cornerstone)
- mac 下SVN服务搭建 (精简步骤)
- Mac上搭建本地svn服务器并使用cornerstone连接本地svn服务
- svn服务端开启某个目录的服务
- Mac OS X 开启Http Ftp服务
- mac开启服务命令
- mac svn 服务配置 客户端连接说明
- Mac OS X开启TFTP服务
- SVN在MAC上的开启方式
- SmartSVN 8.6和Keygen for mac(完美破解) mac svn 服务配置 客户端连接说明
- 在mac下搭建svn服务
- mac 开启SSH服务
- 开启svn仓库服务?
- mac开启sshd服务
- Mac上开启Web服务
- mac搭建本地svn服务