win8 office2013 win7 office2010 server2008 server2012激活工具
2012-12-06 22:50
751 查看
KMSmicro 4.0版使用说明
下载地址:
http://down.51cto.com/data/621430
KMSmicro 3.10
下载地址:
http://down.51cto.com/data/621436
两个软件都可能激活.自己选择.
注意:office只能激活VOL (批量授权版)
推荐下载地址:
office下载地址:
http://hi.baidu.com/pizialiang/item/2bf082ce0e6629320831c679
有图有真相:
版本更新太快了,TMD
比3.11版没有什么大的改进:
1、 启动本地服务器时自动检测并自动充电,已达到所需要的最低激活次数(貌似3.11版就有了,这个版本修复了一些Bugs?);
2、 俄文和英文服务器都有,可以根据自己爱好选择(谁没事选俄文干什么,英文还没学好呢);
3、 服务器启动时自动同步网络时间(不知道还设置“T”命令干什么?搞不懂这些俄国人);
4、
第一步 启动服务器
建议系统安装完毕后,将系统置于“管理员模式”下进行, [/b]办法网上一大堆。[/b]
在KMSmicro 4.0文件夹中,双击上述图中程序以启动服务器,不要动其它三个了,没大用。
等待。。。。。。貌似有假死的现象,不要管,死等。可能出现防火墙警告,选择允许通过。[/b][/b]
[/b]
服务器正在启动,并进行自动检测和充电,已达到激活Windows所需要的24次,激活Office 2010和2013所需要的4次的要求。
为保险起见,还是在“Select Option:”处键入“T”以同步网络时间。
直到窗口最下方出现“Press any key to continue”时,表明第一步(启动服务器),也是最重要的一步大功告成。
注意:1[/b]、不要关闭此窗口,因为它是激活平台!!![/b]
2、鼠标进入窗口,只需在窗口内任意位置双击即可,而要鼠标从窗口释放,
则需要同时按下键盘上的CTRL和Alt键。
第二部 激活操作系统
和3.12版一样,没有任何改变。在KMSmicro 4.0的文件夹中,选择不同版本的激活器,并以管理员方式运行。即会出现下属窗口。
点击所需要激活的系统按钮,窗口左上角即会出现红色“processing”(正在处理)字样,稍等片刻,窗口下部即会出现“Activation successful”(激活成功)字样,表明系统已经成功激活180天(够用了吧?以后肯定有永久激活器出现)
这时如果需要激活Office的话,上述两个程序都不要关闭,即刻安装Office,再在激活程序中选择所需要激活的Office版本,同样的一会即会显示激活成功的字样。
不管是否激活Office,激活完成后,都需要正确关闭服务器,否则服务器会持续发送激活信息,本身程序会扩大到20G左右。所以,一定要正确关闭服务器:在服务器窗口任意位置双击鼠标,已进入并控制服务器程序,键入“S”键,服务器程序即会自动关闭。[/b]
[/b]
英文版使用说明摘录:[/b]
Activation may fail for the following reasons: [/b]
激活失败可能的原因
1. Wrong product key installed or not installed at all.
密钥不正确或者根本没有设置。
2. The KMS Server Client Count value is insufficient to activate a system
(the counter is not "boosted").
服务器宿主计数器数目没有达到激活系统所必需的数值(即:计数器没有“启动”)
Execute the Server menu option: "Increasing KMS Server Client Count"
这时,须启动服务器选项“增加服务器宿主计数”
3. Port 1688 is used by another application, so that The Server can`t connect a PC,
Uninstall all previous "activators" and "cracks" for Office 2010&2013.
1688端口没其它程序占用,因此服务器不能连接到电脑。这时需要卸载以前启用的所有激活Office 2010和2013的激活器或破解程序。
4. Your time zone differs from the Server`s one.
Set the server`s time zone or set on your PC UTC+7 time zone.
电脑时区和服务器时区不一致。运行“T”命令即可。
5. Our KMSmicro is incompatiable with your PC.
Such a thing never happened before, so you are extremly unlucky person
本激活程序和电脑不兼容。那只能怪你命不好了。
The Server operation basic instructions: [/b]服务器基本操作说明[/b]
"T" - Time syncronization via the internet.
通过互联网同步时间
"H" - Displays a Windows server activation status.
显示Windows服务器激活状态
"10" - Displays an Office 2010 server activation status .
显示Office 2012服务器激活状态
"13" - Displays an Office 2013 server activation status .
显示Office2013激活状态
"Z" - Sets a time zone and current time.
设置时区和当前时间。
"C" - The Server Client Count "boosting".
启动服务器计数器
"S" - The Server shutdown.
关闭服务器
下载地址:
http://down.51cto.com/data/621430
KMSmicro 3.10
下载地址:
http://down.51cto.com/data/621436
两个软件都可能激活.自己选择.
注意:office只能激活VOL (批量授权版)
推荐下载地址:
office下载地址:
http://hi.baidu.com/pizialiang/item/2bf082ce0e6629320831c679
有图有真相:
版本更新太快了,TMD
比3.11版没有什么大的改进:
1、 启动本地服务器时自动检测并自动充电,已达到所需要的最低激活次数(貌似3.11版就有了,这个版本修复了一些Bugs?);
2、 俄文和英文服务器都有,可以根据自己爱好选择(谁没事选俄文干什么,英文还没学好呢);
3、 服务器启动时自动同步网络时间(不知道还设置“T”命令干什么?搞不懂这些俄国人);
4、
第一步 启动服务器
建议系统安装完毕后,将系统置于“管理员模式”下进行, [/b]办法网上一大堆。[/b]
在KMSmicro 4.0文件夹中,双击上述图中程序以启动服务器,不要动其它三个了,没大用。
等待。。。。。。貌似有假死的现象,不要管,死等。可能出现防火墙警告,选择允许通过。[/b][/b]
[/b]
服务器正在启动,并进行自动检测和充电,已达到激活Windows所需要的24次,激活Office 2010和2013所需要的4次的要求。
为保险起见,还是在“Select Option:”处键入“T”以同步网络时间。
直到窗口最下方出现“Press any key to continue”时,表明第一步(启动服务器),也是最重要的一步大功告成。
注意:1[/b]、不要关闭此窗口,因为它是激活平台!!![/b]
2、鼠标进入窗口,只需在窗口内任意位置双击即可,而要鼠标从窗口释放,
则需要同时按下键盘上的CTRL和Alt键。
第二部 激活操作系统
和3.12版一样,没有任何改变。在KMSmicro 4.0的文件夹中,选择不同版本的激活器,并以管理员方式运行。即会出现下属窗口。
点击所需要激活的系统按钮,窗口左上角即会出现红色“processing”(正在处理)字样,稍等片刻,窗口下部即会出现“Activation successful”(激活成功)字样,表明系统已经成功激活180天(够用了吧?以后肯定有永久激活器出现)
这时如果需要激活Office的话,上述两个程序都不要关闭,即刻安装Office,再在激活程序中选择所需要激活的Office版本,同样的一会即会显示激活成功的字样。
不管是否激活Office,激活完成后,都需要正确关闭服务器,否则服务器会持续发送激活信息,本身程序会扩大到20G左右。所以,一定要正确关闭服务器:在服务器窗口任意位置双击鼠标,已进入并控制服务器程序,键入“S”键,服务器程序即会自动关闭。[/b]
[/b]
英文版使用说明摘录:[/b]
Activation may fail for the following reasons: [/b]
激活失败可能的原因
1. Wrong product key installed or not installed at all.
密钥不正确或者根本没有设置。
2. The KMS Server Client Count value is insufficient to activate a system
(the counter is not "boosted").
服务器宿主计数器数目没有达到激活系统所必需的数值(即:计数器没有“启动”)
Execute the Server menu option: "Increasing KMS Server Client Count"
这时,须启动服务器选项“增加服务器宿主计数”
3. Port 1688 is used by another application, so that The Server can`t connect a PC,
Uninstall all previous "activators" and "cracks" for Office 2010&2013.
1688端口没其它程序占用,因此服务器不能连接到电脑。这时需要卸载以前启用的所有激活Office 2010和2013的激活器或破解程序。
4. Your time zone differs from the Server`s one.
Set the server`s time zone or set on your PC UTC+7 time zone.
电脑时区和服务器时区不一致。运行“T”命令即可。
5. Our KMSmicro is incompatiable with your PC.
Such a thing never happened before, so you are extremly unlucky person
本激活程序和电脑不兼容。那只能怪你命不好了。
The Server operation basic instructions: [/b]服务器基本操作说明[/b]
"T" - Time syncronization via the internet.
通过互联网同步时间
"H" - Displays a Windows server activation status.
显示Windows服务器激活状态
"10" - Displays an Office 2010 server activation status .
显示Office 2012服务器激活状态
"13" - Displays an Office 2013 server activation status .
显示Office2013激活状态
"Z" - Sets a time zone and current time.
设置时区和当前时间。
"C" - The Server Client Count "boosting".
启动服务器计数器
"S" - The Server shutdown.
关闭服务器
相关文章推荐
- Win8 激活,Office2013激活,win7激活,office2010激活
- windowns server 2008 R2激活工具(含win7、vista)
- windowns server 2008 R2激活工具(含win7、vista)
- 自己动手:归零照样激活——Windows7 & Server 2008 R2 电话激活辅助工具
- SQLSERVER 免费对比数据库结构和数据的工具支持:SQL Server 2012, SQL Server 2008 and SQL Server 2005
- Win server 2008 R2激活工具使用图文教程(SK Patch v1 R2 Final OEM)
- 修改Win7、Win8、server2012等远程桌面端口及防火墙规则
- office2013 win7 64位激活工具
- win7 win8 win8.1 office2013 key 激活 密钥 实时更新
- windows 2008激活工具/win7 激活工具
- microsoft sql server 2008在64位win7上安装后服务器名称为空的解决办法
- server2008实验之一 自动部署win7客户端和08服务器
- MSSQL数据库日志清理工具(2000/2005/2008/2012/2014/2016)
- Windows8最新激活工具!!!---及win8激活时提示“文件名、目录名或卷标语法不正确”
- lduan server 2012 MDT2012+WDS Win7部署 上(二十九)
- Office2010 pro附+激活工具
- 打开Visual Studio 2012的解决方案 连接 Dynamics CRM 2011 的Connect to Dynamics CRM Server 在其工具下没有显示
- 使用chew-wga激活工具windows 2008激活失败,求高人指导!
- 激活Win8以及激活后Win7显示未激活的解决方法