Cisco Switch Uplinkfast and Backbonefast
2012-10-26 10:34
561 查看
1. Uplinkfast: apply to trunk ports, should be configured only on access-layer switches.
# spanning-tree uplinkfast
2. Backbonefast: should be configured on every switch in the network.
# spanning-tree backbonefast
3. Loop guard: should be configured on two-switch-connected ports (trunk ports)
# spanning-tree loopguard default
本文出自 “Ilovecat(个人笔记)” 博客,请务必保留此出处http://hj192837.blog.51cto.com/655995/1037613
# spanning-tree uplinkfast
2. Backbonefast: should be configured on every switch in the network.
# spanning-tree backbonefast
3. Loop guard: should be configured on two-switch-connected ports (trunk ports)
# spanning-tree loopguard default
本文出自 “Ilovecat(个人笔记)” 博客,请务必保留此出处http://hj192837.blog.51cto.com/655995/1037613
相关文章推荐
- Cisco Switch Uplinkfast and Backbonefast
- 思科加强生成树性能的属性(Portfast /Uplinkfast/BackboneFast)与RSTP的关系 推荐
- 直接链路故障&uplinkfast 间接链路故障backbonefast
- Uplinkfast / Backbonefast / Portfast
- 思科交换机Portfast和Uplinkfast配置实验
- Cisco Router and switch 配置命令(六)
- Cisco's router and switch : Encryption and Crack
- Portfast & Uplinkfast
- Cisco Router and switch 配置命令(七)
- EtherChannel Between a Cisco Catalyst Switch and Server Configuration Example
- CCNA实验十二 STP之PortFast、UplinkFast、BackBoneFast
- Cisco Router and switch 配置命令(八)
- STP Feature之UplinkFast
- How to enable Spanning Tree Portfast in Cisco Catalyst switch (IOS)
- 68、PortFast、UplinkFast、BackboneFast简介
- STP增强-PortFast-UplinkFast-BackboneFast
- Cisco Router and switch 配置命令(九)
- Portfast、uplinkfast、backbonefast
- Link Aggregation and LACP with Open vSwitch
- portfast和UplinkFast的理解