brocade 300光端交换机zone划分
2012-09-16 22:10
267 查看
brocade 300光端交换机zone划分
我们这里是brocade的光端交换机,其实那个厂家的都一样,原理在哪里,按照原理和架构去划分zone。
当然图形界面划分也很简单
Fabric OS (WOLFB300SWA)
Fabos Version 6.4.2a
WOLFB300SWA login: admin
Password:
-----------------------------------------------------------------
WOLFB300SWA:admin>
WOLFB300SWA:admin>
WOLFB300SWA:admin>
WOLFB300SWA:admin> cfgshow
Defined configuration:
cfg: WOLFB300SWA
P750lp1_hba1_HDS2300_0a
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,2
Effective configuration:
cfg: WOLFB300SWA
zone: P750lp1_hba1_HDS2300_0a
1,0
1,2
WOLFB300SWA:admin>
zonecreate "P750lp1_hba1_HDS2300_0a","1,0;1,3"
WOLFB300SWA:admin>
cfg
cfgactvshow cfgcreate cfgenable cfgsave cfgsize
cfgadd cfgdelete cfgmcdtmode cfgsaveactivetodefined cfgtransabort
cfgclear cfgdisable cfgremove cfgshow cfgtransshow
WOLFB300SWA:admin> cfgadd
error: Usage: cfgadd "arg1", "arg2"
WOLFB300SWA:admin> cfgadd "P750lp1_hba1_HDS2300_0a","WOLFB300SWA"
"P750lp1_hba1_HDS2300_0a" wrong type
WOLFB300SWA:admin>
cfgadd "WOLFB300SWA","P750lp1_hba1_HDS2300_0a"
WOLFB300SWA:admin>
cfgenable WOLFB300SWA
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'WOLFB300SWA' configuration (yes, y, no, n): [no] yes
zone config "WOLFB300SWA" is in effect
Updating flash ...
WOLFB300SWA:admin>
cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] yes
Nothing changed: nothing to save, returning ...
WOLFB300SWA:admin>
zoneshow
Defined configuration:
cfg: WOLFB300SWA
P750lp1_hba1_HDS2300_0a; P750lp1_hba1_HDS2300_0a
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,3
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,2
Effective configuration:
cfg: WOLFB300SWA
zone: P750lp1_hba1_HDS2300_0a
1,0
1,3
zone: P750lp1_hba1_HDS2300_0a
1,0
1,2
WOLFB300SWA:admin> cfg
cfgactvshow cfgcreate cfgenable cfgsave cfgsize
cfgadd cfgdelete cfgmcdtmode cfgsaveactivetodefined cfgtransabort
cfgclear cfgdisable cfgremove cfgshow cfgtransshow
WOLFB300SWA:admin> cfgremove "WOLFB300SWA","P750lp1_hba1_HDS2300_0a"
WOLFB300SWA:admin> zonedelete "P750lp1_hba1_HDS2300_0a"
WOLFB300SWA:admin> zonecreate "P750_hba1_HDS2300_0a","1,0;1,3"
WOLFB300SWA:admin> cfgadd "WOLFB300SWA","P750_hba1_HDS2300_0a"
WOLFB300SWA:admin> cfgenable WOLFB300SWA
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'WOLFB300SWA' configuration (yes, y, no, n): [no] yes
zone config "WOLFB300SWA" is in effect
Updating flash ...
WOLFB300SWA:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] yes
Nothing changed: nothing to save, returning ...
NB300SWA:admin> zoneshow
Defined configuration:
cfg: WOLFB300SWA
P750lp1_hba1_HDS2300_0a; P750_hba1_HDS2300_0a
zone: P750_hba1_HDS2300_0a
1,0; 1,3
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,2
Effective configuration:
cfg: WOLFB300SWA
zone: P750_hba1_HDS2300_0a
1,0
1,3
zone: P750lp1_hba1_HDS2300_0a
1,0
1,2
WOLFB300SWA:admin>
WOLFB300SWA:admin> zonecreate "P750_hba1_HDS2300_0a","1,0;1,3"
WOLFB300SWA:admin> cfgadd "WOLFB300SWA","P750_hba1_HDS2300_0a"
WOLFB300SWA:admin> cfgenable WOLFB300SWA
WOLFB300SWA:admin> cfgsave
创建zone主要步骤如下:
WOLFB300SWA:admin>zonecreate “P750lp2_hba2_HDS2300_1b","2,1;2,4"
WOLFB300SWA:admin>cfgadd “WOLFB300SWB”,” P750lp2_hba2_HDS2300_1b”
WOLFB300SWB:admin> cfgenable WOLFB300SWB
WOLFB300SWB:admin> cfgsave
WOLFB300SWB:admin> cfgshow
WOLFB300SWB:admin> zoneshow
我们这里是brocade的光端交换机,其实那个厂家的都一样,原理在哪里,按照原理和架构去划分zone。
当然图形界面划分也很简单
Fabric OS (WOLFB300SWA)
Fabos Version 6.4.2a
WOLFB300SWA login: admin
Password:
-----------------------------------------------------------------
WOLFB300SWA:admin>
WOLFB300SWA:admin>
WOLFB300SWA:admin>
WOLFB300SWA:admin> cfgshow
Defined configuration:
cfg: WOLFB300SWA
P750lp1_hba1_HDS2300_0a
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,2
Effective configuration:
cfg: WOLFB300SWA
zone: P750lp1_hba1_HDS2300_0a
1,0
1,2
WOLFB300SWA:admin>
zonecreate "P750lp1_hba1_HDS2300_0a","1,0;1,3"
WOLFB300SWA:admin>
cfg
cfgactvshow cfgcreate cfgenable cfgsave cfgsize
cfgadd cfgdelete cfgmcdtmode cfgsaveactivetodefined cfgtransabort
cfgclear cfgdisable cfgremove cfgshow cfgtransshow
WOLFB300SWA:admin> cfgadd
error: Usage: cfgadd "arg1", "arg2"
WOLFB300SWA:admin> cfgadd "P750lp1_hba1_HDS2300_0a","WOLFB300SWA"
"P750lp1_hba1_HDS2300_0a" wrong type
WOLFB300SWA:admin>
cfgadd "WOLFB300SWA","P750lp1_hba1_HDS2300_0a"
WOLFB300SWA:admin>
cfgenable WOLFB300SWA
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'WOLFB300SWA' configuration (yes, y, no, n): [no] yes
zone config "WOLFB300SWA" is in effect
Updating flash ...
WOLFB300SWA:admin>
cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] yes
Nothing changed: nothing to save, returning ...
WOLFB300SWA:admin>
zoneshow
Defined configuration:
cfg: WOLFB300SWA
P750lp1_hba1_HDS2300_0a; P750lp1_hba1_HDS2300_0a
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,3
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,2
Effective configuration:
cfg: WOLFB300SWA
zone: P750lp1_hba1_HDS2300_0a
1,0
1,3
zone: P750lp1_hba1_HDS2300_0a
1,0
1,2
WOLFB300SWA:admin> cfg
cfgactvshow cfgcreate cfgenable cfgsave cfgsize
cfgadd cfgdelete cfgmcdtmode cfgsaveactivetodefined cfgtransabort
cfgclear cfgdisable cfgremove cfgshow cfgtransshow
WOLFB300SWA:admin> cfgremove "WOLFB300SWA","P750lp1_hba1_HDS2300_0a"
WOLFB300SWA:admin> zonedelete "P750lp1_hba1_HDS2300_0a"
WOLFB300SWA:admin> zonecreate "P750_hba1_HDS2300_0a","1,0;1,3"
WOLFB300SWA:admin> cfgadd "WOLFB300SWA","P750_hba1_HDS2300_0a"
WOLFB300SWA:admin> cfgenable WOLFB300SWA
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'WOLFB300SWA' configuration (yes, y, no, n): [no] yes
zone config "WOLFB300SWA" is in effect
Updating flash ...
WOLFB300SWA:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] yes
Nothing changed: nothing to save, returning ...
NB300SWA:admin> zoneshow
Defined configuration:
cfg: WOLFB300SWA
P750lp1_hba1_HDS2300_0a; P750_hba1_HDS2300_0a
zone: P750_hba1_HDS2300_0a
1,0; 1,3
zone: P750lp1_hba1_HDS2300_0a
1,0; 1,2
Effective configuration:
cfg: WOLFB300SWA
zone: P750_hba1_HDS2300_0a
1,0
1,3
zone: P750lp1_hba1_HDS2300_0a
1,0
1,2
WOLFB300SWA:admin>
WOLFB300SWA:admin> zonecreate "P750_hba1_HDS2300_0a","1,0;1,3"
WOLFB300SWA:admin> cfgadd "WOLFB300SWA","P750_hba1_HDS2300_0a"
WOLFB300SWA:admin> cfgenable WOLFB300SWA
WOLFB300SWA:admin> cfgsave
创建zone主要步骤如下:
WOLFB300SWA:admin>zonecreate “P750lp2_hba2_HDS2300_1b","2,1;2,4"
WOLFB300SWA:admin>cfgadd “WOLFB300SWB”,” P750lp2_hba2_HDS2300_1b”
WOLFB300SWB:admin> cfgenable WOLFB300SWB
WOLFB300SWB:admin> cfgsave
WOLFB300SWB:admin> cfgshow
WOLFB300SWB:admin> zoneshow
相关文章推荐
- 博科BROCADE交换机常用命令与zone配置
- 博科交换机zone划分
- Brocade 4Gb SAN 交换机 - 如何配置 Zone
- Brocade 光纤交换机下zone划分 --- 基础篇
- Brocade 光纤交换机下zone划分 --- 基础篇
- brocade 300交换机密码忘记重置
- Brocade 300 FC交换机收集诊断日志
- 思科路由模拟器 -- (5)交换机配置基础、STP协议及VLAN划分
- zone划分
- Cisco SG300系列交换机划分VLan与普通路由器连接配置
- 思科2950交换机VLAN划分
- [华为] 交换机配置划分VLAN实验
- 交换机VLAN的定义、意义以及划分方式
- 交换机VLAN的划分(转载)
- 如何在交换机上实现虚拟局域网的划分
- 交换机VLAN 划分实验
- 两种交换机配置模式,以配置基于端口划分的VLAN为例
- Brocade 300 配置
- 如何把华为ONU当成普通交换机用并且划分VLAN,型号(华为MA5626,MA5620)
- 实战:Brocade交换机升级OS