c/c++: 多线程编程基础讲解(四)
2012-09-04 12:15
405 查看
http://blog.csdn.net/lzx_bupt/article/details/6913039
经过前面的几个例子,是不是还少个线程创建时属性参数没有提到,见下文示例:
[cpp] view plaincopy
#include <iostream>
#include <pthread.h>
#include <iostream>
#include <pthread.h>
using namespace std;
#define NUM_THREADS 5
void* say_hello(void* args)
{
cout << "hello in thread " << *((int *)args) << endl;
int status = 10 + *((int *)args);//将参数加10
pthread_exit((void*)status);//由于线程创建时候提供了joinable参数,这里可以在退出时添加退出的信息:status供主程序提取该线程的结束信息;
}
int main()
{
pthread_t tids[NUM_THREADS];
int indexes[NUM_THREADS];
pthread_attr_t attr;//要想创建时加入参数,先声明
pthread_attr_init(&attr);//再初始化
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);//声明、初始化后第三步就是设置你想要指定线程属性参数,这个参数表明这个线程是可以join连接的,join功能表示主程序可以等线程结束后再去做某事,实现了主程序和线程同步功能,这个深层理解必须通过图示才能解释;参阅其他资料吧
for(int i = 0; i < NUM_THREADS; ++i)
{
indexes[i] = i;
int ret = pthread_create( &tids[i], &attr, say_hello, (void *)&(indexes[i]) );//这里四个参数都齐全了,更多的配置仍需查阅资料;
if (ret != 0)
{
cout << "pthread_create error: error_code=" << ret << endl;
}
}
pthread_attr_destroy(&attr);//参数使用完了就可以销毁了,必须销毁哦,防止内存泄露;
void *status;
for (int i = 0; i < NUM_THREADS; ++i)
{
int ret = pthread_join(tids[i], &status);//前面创建了线程,这里主程序想要join每个线程后取得每个线程的退出信息status;
if (ret != 0)
{
cout << "pthread_join error: error_code=" << ret << endl;
}
else
{
cout << "pthread_join get status: " << (long)status << endl;
}
}
}
编译运行 g++ -lpthread -o ex_join ex_join.cpp
结果:
[plain] view plaincopy
hello in thread 4
hello in thread 3
hello in thread 2
hello in thread 1
hello in thread 0
pthread_join get status: 10
pthread_join get status: 11
pthread_join get status: 12
pthread_join get status: 13
pthread_join get status: 14
体会一下join的功能吧
经过前面的几个例子,是不是还少个线程创建时属性参数没有提到,见下文示例:
[cpp] view plaincopy
#include <iostream>
#include <pthread.h>
#include <iostream>
#include <pthread.h>
using namespace std;
#define NUM_THREADS 5
void* say_hello(void* args)
{
cout << "hello in thread " << *((int *)args) << endl;
int status = 10 + *((int *)args);//将参数加10
pthread_exit((void*)status);//由于线程创建时候提供了joinable参数,这里可以在退出时添加退出的信息:status供主程序提取该线程的结束信息;
}
int main()
{
pthread_t tids[NUM_THREADS];
int indexes[NUM_THREADS];
pthread_attr_t attr;//要想创建时加入参数,先声明
pthread_attr_init(&attr);//再初始化
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);//声明、初始化后第三步就是设置你想要指定线程属性参数,这个参数表明这个线程是可以join连接的,join功能表示主程序可以等线程结束后再去做某事,实现了主程序和线程同步功能,这个深层理解必须通过图示才能解释;参阅其他资料吧
for(int i = 0; i < NUM_THREADS; ++i)
{
indexes[i] = i;
int ret = pthread_create( &tids[i], &attr, say_hello, (void *)&(indexes[i]) );//这里四个参数都齐全了,更多的配置仍需查阅资料;
if (ret != 0)
{
cout << "pthread_create error: error_code=" << ret << endl;
}
}
pthread_attr_destroy(&attr);//参数使用完了就可以销毁了,必须销毁哦,防止内存泄露;
void *status;
for (int i = 0; i < NUM_THREADS; ++i)
{
int ret = pthread_join(tids[i], &status);//前面创建了线程,这里主程序想要join每个线程后取得每个线程的退出信息status;
if (ret != 0)
{
cout << "pthread_join error: error_code=" << ret << endl;
}
else
{
cout << "pthread_join get status: " << (long)status << endl;
}
}
}
编译运行 g++ -lpthread -o ex_join ex_join.cpp
结果:
[plain] view plaincopy
hello in thread 4
hello in thread 3
hello in thread 2
hello in thread 1
hello in thread 0
pthread_join get status: 10
pthread_join get status: 11
pthread_join get status: 12
pthread_join get status: 13
pthread_join get status: 14
体会一下join的功能吧
相关文章推荐
- c/c++: 多线程编程基础讲解(二)
- c/c++: 多线程编程基础讲解(四)
- c/c++: 多线程编程基础讲解(五)
- c/c++: 多线程编程基础讲解(六)
- c/c++: 多线程编程基础讲解(一)
- c/c++: 多线程编程基础讲解(六)
- c/c++: 多线程编程基础讲解
- c/c++: 多线程编程基础讲解(五)
- c/c++: 多线程编程基础讲解
- c/c++: 多线程编程基础讲解(一)
- c/c++: 多线程编程基础讲解(二)
- c/c++: 多线程编程基础讲解(二)
- c/c++: 多线程编程基础讲解(三)
- c/c++: 多线程编程基础讲解(五)
- c/c++: 多线程编程基础讲解(三)
- c/c++: 多线程编程基础讲解(六)
- c/c++: 多线程编程基础讲解(一)
- c/c++: 多线程编程基础讲解(四)
- c/c++: 多线程编程基础讲解(三)
- c/c++: 多线程编程基础讲解(一)