关于Wince6.0不能远程连接目标机的问题

“VS2005->Target->Remote Tools”打开的远程工具，选用ActiveSync作为连接方式时，会出现如下错误：
“The Microsoft ActiveSync reported the following error: Unable to load device side components”
Solution：

The log indicated device side binaries are missing under "C:\Program

Files\Common Files\Microsoft Shared\Windows CE

Tools\Platman\target\wce600\armV4". The workaround solution is to create

folder "C:\Program Files\Common Files\Microsoft Shared\Windows CE

Tools\Platman\target\wce600\armV4" on your machine, and copy all binaries

from "C:\Program Files\Common Files\Microsoft Shared\Windows CE

Tools\Platman\target\wce600\armV4i". This should solve this problem.

在我们安装好CE6.0的时候它并没有为我们创建armV4的文件夹，那我们只好自己添加了。在C:\Program

Files\Common Files\Microsoft Shared\Windows CE
Tools\Platman\target\wce600\下创建一个名为armV4的文件夹，然后将此目录下的armV4i文件夹中的内容拷贝到armV4文件夹中即可！回到VS2005中重新链接，OK了！