特征脸检测-主成分分析，简单明了，转载了

Eigenfaces face recognition (MATLAB)

2 December 2010

19 Votes

Eigenfaces is a well studied method of face recognition based on principal
component analysis (PCA), popularised by the seminal work of Turk & Pentland. Although the approach has
now largely been superseded, it is still often used as a benchmark to compare the performance of other algorithms against, and serves as a good introduction to subspace-based approaches to face recognition. In this post, I’ll provide a very simple implementation
of eigenfaces face recognition using MATLAB.

PCA is a method of transforming a number of correlated variables into a smaller number of uncorrelated variables. Similar to how Fourier analysis is used to decompose a signal into a set of additive orthogonal sinusoids of varying frequencies, PCA decomposes
a signal (or image) into a set of additive orthogonal basis vectors oreigenvectors. The main difference is that, while Fourier analysis uses a fixed set of basis functions, the PCA basis vectors are learnt from the data set via unsupervised training.
PCA can be applied to the task of face recognition by converting the pixels of an image into a number of eigenface feature vectors, which can then be compared to measure the similarity of two face images.

Note: This code requires the Statistics Toolbox. If you don’t have this, you could take a look at this excellent
article by Matthew Dailey, which I discovered while writing this post. He implements the PCA functions manually, so his code doesn’t require any toolboxes.

Loading the images

The first step is to load the training images. You can obtain faces from a variety of publicly available face databases. In these examples,
I have used a cropped version of the Caltech 1999 face database. The main requirements are that the faces images must
be:

Greyscale images with a consistent resolution. If using colour images, convert them to greyscale first with

rgb2gray

.
I used a resolution of 64 × 48 pixels.

Cropped to only show the face. If the images include background, the face recognition will not work properly, as the background will be incorporated into the classifier. I also usually try to avoid hair, since a persons hair style can change
significantly (or they could wear a hat).

Aligned based on facial features. Because PCA is translation variant, the faces must be frontal and well
aligned on facial features such as the eyes, nose and mouth. Most face databases have ground truth available so you don’t need to label these features by hand. The Image
Processing Toolbox provides somehandy functions for image registration.

Each image is converted into a column vector and then the images are loaded into a matrix of size n × m, where n is the number of pixels in each image and m is the total number of images. The following code reads in all of the PNG
images from the directory specified by

input_dir

and
scales all of the images to the size specified by

image_dims

:

01	input_dir = '/path/to/my/images' ;

02	image_dims = [48, 64];

03

04	filenames = dir(fullfile(input_dir, '*.png' ));

05	num_images = numel(filenames);

06	images = [];

07	for n = 1:num_images

08	filename = fullfile(input_dir, filenames(n).name);

09	img = imread(filename);

10

if n == 1

11	images = zeros(prod(image_dims), num_images);

12

end

13	images(:, n) = img(:);

14

end

Training

Training the face detector requires the following steps (compare to the steps
to perform PCA):

Calculate the mean of the input face images

Subtract the mean from the input images to obtain the mean-shifted images

Calculate the eigenvectors and eigenvalues of the mean-shifted images

Order the eigenvectors by their corresponding eigenvalues, in decreasing order

Retain only the eigenvectors with the largest eigenvalues (the principal components)

Project the mean-shifted images into the eigenspace using the retained eigenvectors

The code is shown below:

01	% steps 1 and 2: find the mean image and the mean-shifted input images

02	mean_face = mean(images, 2);

03	shifted_images = images - repmat(mean_face, 1, num_images);

04

05	% steps 3 and 4: calculate the ordered eigenvectors and eigenvalues

06	[evectors, score, evalues] = princomp(images');

07

08	% step 5: only retain the top 'num_eigenfaces' eigenvectors (i.e. the principal components)

09	num_eigenfaces = 20;

10	evectors = evectors(:, 1:num_eigenfaces);

11

12	% step 6: project the images into the subspace to generate the feature vectors

13	features = evectors' * shifted_images;

Steps 1 and 2 allow us to obtain zero-mean face images. Calculating the eigenvectors and eigenvalues in steps 3 and 4 can be achieved using the

princomp

function.
This function also takes care of mean-shifting the input, so you do not need to perform this manually before calling the function. However, I have still performed the mean-shifting in steps 1 and 2 since it is required for step 6, and the eigenvalues are still
calculated as they will be used later to investigate the eigenvectors. The output from step 4 is a matrix of eigenvectors. Since the

princomp

function
already sorts the eigenvectors by their eigenvalues, step 5 is accomplished simply by truncating the number of columns in the eigenvector matrix. Here we will truncate it to 20 principal components, which is set by the variable

num_eigenfaces

;
this number was selected somewhat arbitrarily, but I will show you later how you can perform some analysis to make a more educated choice for this value. Step 6 is achieved by projecting the mean-shifted input images into the subspace defined by our truncated
set of eigenvectors. For each input image, this projection will generate a feature vector of

num_eigenfaces

elements.

Classification

Once the face images have been projected into the eigenspace, the similarity between any pair of face images can be calculated by finding the Euclidean distance

between
their corresponding feature vectors

and

;
the smaller the distance between the feature vectors, the more similar the faces. We can define a simple similarity score

based
on the inverse Euclidean distance:



To perform face recognition, the similarity score is calculated between an input face image and each of the training images. The matched face is the one with the highest similarity, and the magnitude of the similarity score indicates the confidence of the match
(with a unit value indicating an exact match).

Given an input image

input_image

with
the same dimensions

image_dims

as
your training images, the following code will calculate the similarity score to each training image and display the best match:

01	% calculate the similarity of the input to each training image

02	feature_vec = evectors' * (input_image(:) - mean_face);

03	similarity_score = arrayfun(@(n) 1 / (1 + norm(features(:,n) - feature_vec)), 1:num_images);

04

05	% find the image with the highest similarity

06	[match_score, match_ix] = max(similarity_score);

07

08	% display the result

09	figure, imshow([input_image reshape(images(:,match_ix), image_dims)]);

10	title(sprintf( 'matches %s, score %f' , filenames(match_ix).name, match_score));

Below is an example of a true positive match that was found on my training set with a score of 0.4425:





To detect cases where no matching face exists in the training set, you can set a minimum threshold for the similarity score and ignore any matches below this score.

Further analysis

It can be useful to take a look at the eigenvectors or “eigenfaces” that are generated during training:

1	% display the eigenvectors

2

figure;

3	for n = 1:num_eigenfaces

4	subplot(2, ceil(num_eigenfaces/2), n);

5	evector = reshape(evectors(:,n), image_dims);

6	imshow(evector);

7

end

Above are the 20 eigenfaces that my training set generated. The subspace projection we performed in the final step of training generated a feature vector of 20 coefficients for each image. The feature vectors represent each image as a linear combination of
the eigenfaces defined by the coefficients in the feature vector; if we multiply each eigenface by its corresponding coefficient and then sum these weighted eigenfaces together, we can roughly reconstruct the input image. The feature vectors can be thought
of as a type of compressed representation of the input images.

Notice that the different eigenfaces shown above seem to accentuate different features of the face. Some focus more on the eyes, others on the nose or mouth, and some a combination of them. If we generated more eigenfaces, they would slowly begin to accentuate
noise and high frequency features. I mentioned earlier that our choice of 20 principal components was somewhat arbitrary. Increasing this number would mean that we would retain a larger set of eigenvectors that capture more of the variance within the data
set. We can make a more informed choice for this number by examining how much variability each eigenvector accounts for. This variability is given by the eigenvalues. The plot below shows the cumulative eigenvalues for the first 30 principal components:

1	% display the eigenvalues

2	normalised_evalues = evalues / sum(evalues);

3	figure, plot(cumsum(normalised_evalues));

4	xlabel( 'No. of eigenvectors' ), ylabel( 'Variance accounted for' );

5	xlim([1 30]), ylim([0 1]), grid on;

We can see that the first eigenvector accounts for 50% of the variance in the data set, while the first 20 eigenvectors together account for just over 85%, and the first 30 eigenvectors for 90%. Increasing the number of eigenvectors generally increases recognition
accuracy but also increases computational cost. Note, however, that using too many principal components does not necessarily always lead to higher accuracy, since we eventually reach a point of diminishing returns where the low-eigenvalue components begin
to capture unwanted within-class scatter. The ideal number of eigenvectors to retain will depend on the application and the data set, but in general a size that captures around 90% of the variance is usually a reasonable trade-off.