arm 驱动基础:点亮led_firt
2012-05-15 23:25
309 查看
原理图:
驱动程序代码实现:first_drv.c
应用程序代码实现:
驱动程序代码实现:first_drv.c
#include <linux/module.h> #include <linux/kernel.h> #include <linux/fs.h> #include <linux/init.h> #include <linux/delay.h> #include <asm/uaccess.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/arch/regs-gpio.h> #include <asm/hardware.h> static struct class *firstdrv_class; static struct class_device *firstdrv_class_dev; volatile unsigned long *gpfcon = NULL; volatile unsigned long *gpfdat = NULL; static int first_drv_open(struct inode *inode, struct file *file) { //printk("first_drv_open\n"); /* 配置GPF4,5,6为输出 */ *gpfcon &= ~((0x3<<(4*2)) | (0x3<<(5*2)) | (0x3<<(6*2))); *gpfcon |= ((0x1<<(4*2)) | (0x1<<(5*2)) | (0x1<<(6*2))); return 0; } static ssize_t first_drv_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos) { int val; //printk("first_drv_write\n"); copy_from_user(&val, buf, count); // copy_to_user(); if (val == 1) { // 点灯 *gpfdat &= ~((1<<4) | (1<<5) | (1<<6)); } else { // 灭灯 *gpfdat |= (1<<4) | (1<<5) | (1<<6); } return 0; } static struct file_operations first_drv_fops = { .owner = THIS_MODULE, /* 这是一个宏,推向编译模块时自动创建的__this_module变量 */ .open = first_drv_open, .write = first_drv_write, }; int major; static int first_drv_init(void) { major = register_chrdev(0, "first_drv", &first_drv_fops); // 注册, 告诉内核 firstdrv_class = class_create(THIS_MODULE, "firstdrv"); firstdrv_class_dev = class_device_create(firstdrv_class, NULL, MKDEV(major, 0), NULL, "xyz"); /* /dev/xyz */ gpfcon = (volatile unsigned long *)ioremap(0x56000050, 16); gpfdat = gpfcon + 1; return 0; } static void first_drv_exit(void) { unregister_chrdev(major, "first_drv"); // 卸载 class_device_unregister(firstdrv_class_dev); class_destroy(firstdrv_class); iounmap(gpfcon); } module_init(first_drv_init); module_exit(first_drv_exit); MODULE_LICENSE("GPL");
应用程序代码实现:
#include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <stdio.h> /* firstdrvtest on * firstdrvtest off */ int main(int argc, char **argv) { int fd; int val = 1; fd = open("/dev/xyz", O_RDWR); if (fd < 0) { printf("can't open!\n"); } if (argc != 2) { printf("Usage :\n"); printf("%s <on|off>\n", argv[0]); return 0; } if (strcmp(argv[1], "on") == 0) { val = 1; } else { val = 0; } write(fd, &val, 4); return 0; }
相关文章推荐
- ARM+Linux驱动----点亮开发板的LED
- arm 驱动基础:通过次设备号精确控制led亮灭
- Linux 字符设备驱动开发基础(一)—— 编写简单 LED 设备驱动
- 纯led驱动-arm平台
- 基于ARM_contexA9 led驱动编程
- ARM底层学习笔记-裸板实验程序解析-点亮LED
- 基于ARM 的led循环点亮C程序
- arm 驱动基础:字符设备驱动程序之同步互斥阻塞
- ARM裸板程序的开发和编译(以点亮LED灯为例)
- linux字符驱动之点亮LED
- OK6410字符设备驱动点亮LED
- 2.点亮一盏LED(Thumb和ARM语言实现)
- 基于ARM_contexA9 led驱动编程
- ARM之LED驱动
- 驱动04.平台总线驱动模型——点亮LED灯
- ARM底层学习笔记-裸板实验程序解析-点亮LED
- linux字符驱动之点亮LED
- 字符设备驱动点亮led
- linux平台总线驱动设备模型之点亮LED
- arm驱动程序——点亮led-利用次设备号(韦东山的视频总结及针对linux-2.6.30)