UC故事 2012/04/07 build server/client

1. configuration parameters

* client (infowarelab.ini)

CLUSTERID=frankcluster

ControllerList=tcp://192.168.1.104:4433

* server (iwlab.ini)

ClusterID=frankcluster

ClientBindPort=4433;

InfoSvrCommandIP_0=tcp://192.168.1.104:4433;

[MCS]

InfoSvrCommandIP_0=tcp://192.168.1.104:4433;

2. config files

* server：

debug状态：E:/projects-workspace/box-4.2-UCP-4.5-0429/src/Server/InfoSvr4.2/conf/iwlab.ini

release状态：E:/projects-workspace/box-4.2-UCP-4.5-0429/bin/dlls/Release/iwlab.ini

* client

debug：E:/projects-workspace/box-4.2-UCP-4.5-0429/bin/dlls/debug/infowarelab.ini

release：E:/projects-workspace/box-4.2-UCP-4.5-0429/bin/dlls/release/infowarelab.ini

3. config server

$20120407 08:59:13.937 5540/1492 ERROR: CRtAcceptorTcp::StartListen, bind() failed! addr=192.168.1.100 port=1225 err=10049:在其上下文中，该请求的地址无效。

this=0x1765b60

20120407 08:59:13.921 5540/6112 info: CInfoSvrGccProvider::ParseStr2Address address tcp://192.168.1.100:1227

$20120407 08:59:13.921 5540/6112 info: CInfoSvrGccProvider::ParseStr2Address address tcp://192.168.1.100:9999

$20120407 08:59:13.921 5540/6112 info: CInfoSvrGccProvider::ParseStr2Address address tcp://192.168.1.100:9999

Q：src/x/y/conf/iwlab.ini内，ip已经改成192.168.1.104，但不知为何会有192.168.1.100出现？

A：发现info server实际使用的iwlab.ini在bin/dlls/Debug/conf中。

重设后，发现client显示“重新连接”，修改以下参数后，OK！

[MCS]

InfoSvrCommandIP_0=tcp://192.168.1.104:4433;

总结：

*　iwlab.ini的位置

* 　InfoSvrCommandIP_0

Q: data呢？