HP-UX启动和关闭
2012-02-22 12:57
281 查看
HP-UX启动和关闭
按硬件平台分: HP 9000 Systems — PA-RISC processor family HP Integrity Servers — Itanium processor family HP IS启动过程: EFI shell 将自动装入vmunix内核启动hp-ux. 如果auto没有打开,系统将进入EFI shell,就需要用下面命令启动unix >boot vmunix 打开或关闭自启动的命令: EFI shell环境下:Shell> autoboot on,Shell> autoboot off 运行的hpunix环境下:/usr/sbin/setboot -b on, /usr/sbin/setboot -b off 在自启动hp-ux内核时,可以按任何键终止自启动,切换到交换式启动,然后可以指定不同的内核启动: >boot testunix 查看自启动是否打开: # setboot -v Primary bootpath : 0/1/1/0.0.0 HA Alternate bootpath : 0/1/2/0 Alternate bootpath : 0/1/2/1 Autoboot is ON (enabled) setboot: error accessing firmware - Function is not available The firmware of your system does not support querying or changing the SpeedyBoot settings. HP9000启动过程: Boot Console Handler (BCH)将发起自启动,auto文件内容:hpux vmunix 打开或关闭自启动的命令: BCH环境下: Main Menu: Enter Command > co au bo on,Main Menu: Enter Command > co au bo off 运行的hpunix环境下: /usr/sbin/setboot -b on, /usr/sbin/setboot -b off 打开或关闭自搜索(按顺序自搜索启动的位置)启动的命令: BCH环境下: Main Menu: Enter Command > co au sea on,Main Menu: Enter Command > co au sea off 运行的hpunix环境下: /usr/sbin/setboot -s on, /usr/sbin/setboot -s off 系统启动级别说明: Run level 1: minimal system configuration Run level 2: multi-user services, except NFS server Run level 3: NFS server (to export local file systems) 定制自启动程序: 假如在级别3加自启动程序 创建/sbin/rc3.d/S99DB_Auto_Start脚本,然后做一个软连接 ln -s /sbin/init.d/DB_Auto_Start /sbin/rc3.d/S99DB_Auto_Start 立即关闭并重启 /sbin/shutdown -r 0 立即关闭并停止等待关掉电源 /sbin/shutdown -h 0 立即切换到单用户模式 /sbin/shutdown 0 |
相关文章推荐
- 在hp-ux及solaris下关闭apache服务的脚本 (by quqi99)
- Hp 通过MP卡启动、关闭电源 Hp9000小型机的方式
- HP-UX:Route 添加启动静态路由
- HP-UX自启动和关闭
- oracle启动(linux sunos aix HP-UX)
- HP UNIX 系统关闭与启动
- oracle 启动和关闭bat文件
- 应用程序无法正常启动(0xc000007b)。请单击“确定”关闭应用程序 解决
- 如何关闭掉eclipse启动的自动更新功能
- 网店版重生系列:Linux下Jboss启动、关闭、端口配置等常见问题FAQ
- Nagios监控HP-UX
- 用shell命令启动,关闭,查看zookeeper
- linux下oracle 10g的启动与关闭
- eclipse非正常关闭,重新无法启动
- 关于tomcat启动后马上又自动关闭的问题
- hp-ux slvm
- linux平台启动关闭oracle数据库
- tomcat异常关闭自动启动
- oracle 启动关闭以及监听启动关闭命令
- Linux系统Oracle启动、关闭