F5如何查看第三方模块
2011-12-06 11:06
211 查看
sol8153:F5 support of third-party hardware components
General Solution
Original Publication Date: 12/12/2007
Updated Date: 08/10/2011
F5 policies strictly prohibit the use of third-party hardware components with F5 products. For example, third-party power supplies, memory modules, hard disk drives and XFP / SFP optical components are not supported for use with F5 products, and may invalidate the product's warranty or inhibit efforts by F5 Customer Support to service or troubleshoot the altered product.
F5 Hardware Engineering and Testing teams have spent significant time and effort to ensure that all hardware components and modules sold by F5 have been tested and approved to work with our platforms to the specifications outlined in the product platform guides. Only parts tested in this manner and purchased from F5 are supported in our platforms.
To purchase add-on hardware components for your BIG-IP platform, contact your F5 Reseller or F5 Sales Representative for specifications and pricing.
You can use one of the following commands to view which ports have modules installed and the module vendor name:
BIG-IP versions 10.0.0 and later
bigpipe interface all vendor
The following command output displays that management 1.1 through 1.16 are directly connected and therefore have no module to probe. Interfaces 2.1, 2.2 and 2.4 contain F5 branded SFPs. Interface 2.3 does not forward traffic as the installed module is a third party unsupported prohibited module:
INTERFACE 1.1 - Vendor: none
INTERFACE 1.2 - Vendor: none
INTERFACE 1.3 - Vendor: none
INTERFACE 1.4 - Vendor: none
INTERFACE 1.5 - Vendor: none
INTERFACE 1.6 - Vendor: none
INTERFACE 1.7 - Vendor: none
INTERFACE 1.8 - Vendor: none
INTERFACE 1.9 - Vendor: none
INTERFACE 1.10 - Vendor: none
INTERFACE 1.11 - Vendor: none
INTERFACE 1.12 - Vendor: none
INTERFACE 1.13 - Vendor: none
INTERFACE 1.14 - Vendor: none
INTERFACE 1.15 - Vendor: none
INTERFACE 1.16 - Vendor: none
INTERFACE 2.1 - Vendor: F5 NETWORKS INC
INTERFACE 2.2 - Vendor: F5 NETWORKS INC
INTERFACE 2.3 - FINISAR CORP
INTERFACE 2.4 - Vendor: F5 NETWORKS INC
BIG-IP versions 9.4.0 through 9.4.8
guishell -c "select NAME,VENDOR_NAME from interface where name like '%'"
The following command output displays that management 1.1 through 1.16 are directly connected and therefore have no module to probe. Management 2.1 and 2.2 contain F5 branded SFPs, while 2.3 and 2.4 contain no modules.
--------------------------
| NAME | VENDOR_NAME |
--------------------------
| mgmt | |
| 1.10 | |
| 1.11 | |
| 1.12 | |
| 1.13 | |
| 1.14 | |
| 1.15 | |
| 1.16 | |
| 1.9 | |
| 2.1 | F5 NETWORKS INC |
| 2.2 | F5 NETWORKS INC |
| 1.1 | |
| 1.2 | |
| 1.3 | |
| 1.4 | |
| 1.5 | |
| 1.6 | |
| 1.7 | |
| 1.8 | |
| 2.3 | |
| 2.4 | |
--------------------------
21 rows 0.184s (mcpj: 0.018s, hsql: 0.157s, format: 0.009s)
The following command will only display the ports that allow modules and the vendor names of the modules installed:
guishell -c "select NAME,VENDOR_NAME from interface where SFP_MEDIA='true' and STATUS='1'"
In the command output, 2.3 does not forward traffic as the installed module is a third party unsupported prohibited module:
--------------------------
| NAME | VENDOR_NAME |
--------------------------
| 2.1 | F5 NETWORKS INC |
| 2.2 | F5 NETWORKS INC |
| 2.3 | FINISAR CORP |
| 2.4 | F5 NETWORKS INC |
--------------------------
4 rows 0.188s (mcpj: 0.018s, hsql: 0.161s, format: 0.009s)
General Solution
Original Publication Date: 12/12/2007
Updated Date: 08/10/2011
F5 policies strictly prohibit the use of third-party hardware components with F5 products. For example, third-party power supplies, memory modules, hard disk drives and XFP / SFP optical components are not supported for use with F5 products, and may invalidate the product's warranty or inhibit efforts by F5 Customer Support to service or troubleshoot the altered product.
F5 Hardware Engineering and Testing teams have spent significant time and effort to ensure that all hardware components and modules sold by F5 have been tested and approved to work with our platforms to the specifications outlined in the product platform guides. Only parts tested in this manner and purchased from F5 are supported in our platforms.
To purchase add-on hardware components for your BIG-IP platform, contact your F5 Reseller or F5 Sales Representative for specifications and pricing.
You can use one of the following commands to view which ports have modules installed and the module vendor name:
BIG-IP versions 10.0.0 and later
bigpipe interface all vendor
The following command output displays that management 1.1 through 1.16 are directly connected and therefore have no module to probe. Interfaces 2.1, 2.2 and 2.4 contain F5 branded SFPs. Interface 2.3 does not forward traffic as the installed module is a third party unsupported prohibited module:
INTERFACE 1.1 - Vendor: none
INTERFACE 1.2 - Vendor: none
INTERFACE 1.3 - Vendor: none
INTERFACE 1.4 - Vendor: none
INTERFACE 1.5 - Vendor: none
INTERFACE 1.6 - Vendor: none
INTERFACE 1.7 - Vendor: none
INTERFACE 1.8 - Vendor: none
INTERFACE 1.9 - Vendor: none
INTERFACE 1.10 - Vendor: none
INTERFACE 1.11 - Vendor: none
INTERFACE 1.12 - Vendor: none
INTERFACE 1.13 - Vendor: none
INTERFACE 1.14 - Vendor: none
INTERFACE 1.15 - Vendor: none
INTERFACE 1.16 - Vendor: none
INTERFACE 2.1 - Vendor: F5 NETWORKS INC
INTERFACE 2.2 - Vendor: F5 NETWORKS INC
INTERFACE 2.3 - FINISAR CORP
INTERFACE 2.4 - Vendor: F5 NETWORKS INC
BIG-IP versions 9.4.0 through 9.4.8
guishell -c "select NAME,VENDOR_NAME from interface where name like '%'"
The following command output displays that management 1.1 through 1.16 are directly connected and therefore have no module to probe. Management 2.1 and 2.2 contain F5 branded SFPs, while 2.3 and 2.4 contain no modules.
--------------------------
| NAME | VENDOR_NAME |
--------------------------
| mgmt | |
| 1.10 | |
| 1.11 | |
| 1.12 | |
| 1.13 | |
| 1.14 | |
| 1.15 | |
| 1.16 | |
| 1.9 | |
| 2.1 | F5 NETWORKS INC |
| 2.2 | F5 NETWORKS INC |
| 1.1 | |
| 1.2 | |
| 1.3 | |
| 1.4 | |
| 1.5 | |
| 1.6 | |
| 1.7 | |
| 1.8 | |
| 2.3 | |
| 2.4 | |
--------------------------
21 rows 0.184s (mcpj: 0.018s, hsql: 0.157s, format: 0.009s)
The following command will only display the ports that allow modules and the vendor names of the modules installed:
guishell -c "select NAME,VENDOR_NAME from interface where SFP_MEDIA='true' and STATUS='1'"
In the command output, 2.3 does not forward traffic as the installed module is a third party unsupported prohibited module:
--------------------------
| NAME | VENDOR_NAME |
--------------------------
| 2.1 | F5 NETWORKS INC |
| 2.2 | F5 NETWORKS INC |
| 2.3 | FINISAR CORP |
| 2.4 | F5 NETWORKS INC |
--------------------------
4 rows 0.188s (mcpj: 0.018s, hsql: 0.161s, format: 0.009s)
相关文章推荐
- linux学习笔记_如何查看系统模块[转载]
- 如何安装nginx第三方模块
- 如何在Eclipse中查看第三方库的代码
- 如何查看系统模块
- 如何在Eclipse中查看Android源码或者第三方组件包源码
- 如何安装nginx第三方模块
- android 编程时,如何在Eclipse中查看Android源码或者第三方组件包源码
- 如何查看Drupal网站使用的模块
- 如何查看 Apache 模块是否正常
- 如何查看PYTHON的安装位置以及安装第三方库的位置
- iOS如何查看工程里添加的第三方静态库(.a或.framework)中发送的网络请求
- 如何查看Oracle Apps的版本信息以及模块信息
- python中如何用dis模块来查看py的汇编代码?
- 如何查看LINUX下的一个USB设备使用的驱动模块
- Yum/RPM安装的Nginx如何添加第三方模块(LuaJIT)
- 如何在Eclipse中查看Android源码或者第三方组件包源码
- 如何查看gpio 使用状态,以及被那些模块request
- python 如何安装第三方模块module
- 如何查看 Apache 模块是否正常
- 如何高效通过网络搜索Python第三方功能模块