9 Steps to Install and Configure PostgreSQL from Source on Linux

Similar to mySQL, postgreSQL is very famous and feature packedfree and open source database.

Earlier we’ve discussed several installations including LAMP stack installation, Apache2 installation from source, PHP5 installation from source and mySQL installation.

In this article, let us review how to install postgreSQL databaseon Linux from source code.

Step 1: Download postgreSQL source code

From the postgreSQL download site, choose the mirror site that is located in your country.

# wget http://wwwmaster.postgresql.org/redir/198/f/source/v8.3.7/postgresql-8.3.7.tar.gz[/code] 

Step 2: Install postgreSQL
# tar xvfz postgresql-8.3.7.tar.gz

# cd postgresql-8.3.7

# ./configure
checking for sgmlspl... no
configure: creating ./config.status
config.status: creating GNUmakefile
config.status: creating src/Makefile.global
config.status: creating src/include/pg_config.h
config.status: creating src/interfaces/ecpg/include/ecpg_config.h
config.status: linking ./src/backend/port/tas/dummy.s to src/backend/port/tas.s
config.status: linking ./src/backend/port/dynloader/linux.c to src/backend/port/dynloader.c
config.status: linking ./src/backend/port/sysv_sema.c to src/backend/port/pg_sema.c
config.status: linking ./src/backend/port/sysv_shmem.c to src/backend/port/pg_shmem.c
config.status: linking ./src/backend/port/dynloader/linux.h to src/include/dynloader.h
config.status: linking ./src/include/port/linux.h to src/include/pg_config_os.h
config.status: linking ./src/makefiles/Makefile.linux to src/Makefile.port

# make
make[3]: Leaving directory `/usr/save/postgresql-8.3.7/contrib/spi'
rm -rf ./testtablespace
mkdir ./testtablespace
make[2]: Leaving directory `/usr/save/postgresql-8.3.7/src/test/regress'
make[1]: Leaving directory `/usr/save/postgresql-8.3.7/src'
make -C config all
make[1]: Entering directory `/usr/save/postgresql-8.3.7/config'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/save/postgresql-8.3.7/config'
All of PostgreSQL successfully made. Ready to install.

# make install
make -C test/regress install
make[2]: Entering directory `/usr/save/postgresql-8.3.7/src/test/regress'
/bin/sh http://www.cnblogs.com/../config/install-sh -c  pg_regress '/usr/local/pgsql/lib/pgxs/src/test/regress/pg_regress'
make[2]: Leaving directory `/usr/save/postgresql-8.3.7/src/test/regress'
make[1]: Leaving directory `/usr/save/postgresql-8.3.7/src'
make -C config install
make[1]: Entering directory `/usr/save/postgresql-8.3.7/config'
mkdir -p -- /usr/local/pgsql/lib/pgxs/config
/bin/sh ../config/install-sh -c -m 755 ./install-sh '/usr/local/pgsql/lib/pgxs/config/install-sh'
/bin/sh ../config/install-sh -c -m 755 ./mkinstalldirs '/usr/local/pgsql/lib/pgxs/config/mkinstalldirs'
make[1]: Leaving directory `/usr/save/postgresql-8.3.7/config'
PostgreSQL installation complete.



PostgreSQL ./configure options
Following are various options that can be passed to the ./configure:

–prefix=PREFIX install architecture-independent files in PREFIX. Default installation location is /usr/local/pgsql

–enable-integer-datetimes  enable 64-bit integer date/time support

–enable-nls[=LANGUAGES]  enable Native Language Support

–disable-shared         do not build shared libraries

–disable-rpath           do not embed shared library search path in executables

–disable-spinlocks    do not use spinlocks

–enable-debug           build with debugging symbols (-g)

–enable-profiling       build with profiling enabled

–enable-dtrace           build with DTrace support

–enable-depend         turn on automatic dependency tracking

–enable-cassert         enable assertion checks (for debugging)

–enable-thread-safety  make client libraries thread-safe

–enable-thread-safety-force  force thread-safety despite thread test failure

–disable-largefile       omit support for large files

–with-docdir=DIR      install the documentation in DIR [PREFIX/doc]

–without-docdir         do not install the documentation

–with-includes=DIRS  look for additional header files in DIRS

–with-libraries=DIRS  look for additional libraries in DIRS

–with-libs=DIRS         alternative spelling of –with-libraries

–with-pgport=PORTNUM   change default port number [5432]

–with-tcl                     build Tcl modules (PL/Tcl)

–with-tclconfig=DIR   tclConfig.sh is in DIR

–with-perl                   build Perl modules (PL/Perl)

–with-python              build Python modules (PL/Python)

–with-gssapi               build with GSSAPI support

–with-krb5                  build with Kerberos 5 support

–with-krb-srvnam=NAME  default service principal name in Kerberos [postgres]

–with-pam                  build with PAM support

–with-ldap                  build with LDAP support

–with-bonjour            build with Bonjour support

–with-openssl            build with OpenSSL support

–without-readline      do not use GNU Readline nor BSD Libedit for editing

–with-libedit-preferred  prefer BSD Libedit over GNU Readline

–with-ossp-uuid        use OSSP UUID library when building contrib/uuid-ossp

–with-libxml               build with XML support

–with-libxslt               use XSLT support when building contrib/xml2

–with-system-tzdata=DIR  use system time zone data in DIR

–without-zlib              do not use Zlib

–with-gnu-ld              assume the C compiler uses GNU ld [default=no]

PostgreSQL Installation Issue1:
You may encounter the following error message while performing ./configure during postgreSQL installation.

# ./configure
checking for -lreadline... no
checking for -ledit... no
configure: error: readline library not found
If you have readline already installed, see config.log for details on the
failure.  It is possible the compiler isn't looking in the proper directory.
Use --without-readline to disable readline support.



PostgreSQL Installation Solution1:
Install the readline-devel and libtermcap-devel to solve the above issue.

# rpm -ivh libtermcap-devel-2.0.8-46.1.i386.rpm readline-devel-5.1-1.1.i386.rpm
warning: libtermcap-devel-2.0.8-46.1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
Preparing...                ########################################### [100%]
1:libtermcap-devel       ########################################### [ 50%]
2:readline-devel         ########################################### [100%]



Step 3: Verify the postgreSQL directory structure
After the installation, make sure bin, doc, include, lib, man and share directories are created under the default /usr/local/pgsql directory as shown below.

# ls -l /usr/local/pgsql/
total 24
drwxr-xr-x 2 root root 4096 Apr  8 23:25 bin
drwxr-xr-x 3 root root 4096 Apr  8 23:25 doc
drwxr-xr-x 6 root root 4096 Apr  8 23:25 include
drwxr-xr-x 3 root root 4096 Apr  8 23:25 lib
drwxr-xr-x 4 root root 4096 Apr  8 23:25 man
drwxr-xr-x 5 root root 4096 Apr  8 23:25 share



Step 4: Create postgreSQL user account
# adduser postgres

# passwd postgres
Changing password for user postgres.
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully.



Step 5: Create postgreSQL data directory
Create the postgres data directory and make postgres user as the owner.

# mkdir /usr/local/pgsql/data

# chown postgres:postgres /usr/local/pgsql/data

# ls -ld /usr/local/pgsql/data
drwxr-xr-x 2 postgres postgres 4096 Apr  8 23:26 /usr/local/pgsql/data



Step 6: Initialize postgreSQL data directory
Before you can start creating any postgreSQL database, the empty data directory created in the above step should be initialized using the initdb command as shown below.

# su - postgres

# /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data/
The files belonging to this database system will be owned by user postgres
This user must also own the server process.

The database cluster will be initialized with locale en_US.UTF-8.
The default database encoding has accordingly been set to UTF8.
The default text search configuration will be set to "english".

fixing permissions on existing directory /usr/local/pgsql/data ... ok
creating subdirectories ... ok
selecting default max_connections ... 100
selecting default shared_buffers/max_fsm_pages ... 32MB/204800
creating configuration files ... ok
creating template1 database in /usr/local/pgsql/data/base/1 ... ok
initializing pg_authid ... ok
initializing dependencies ... ok
creating system views ... ok
loading system objects' descriptions ... ok
creating conversions ... ok
creating dictionaries ... ok
setting privileges on built-in objects ... ok
creating information schema ... ok
vacuuming database template1 ... ok
copying template1 to template0 ... ok
copying template1 to postgres ... ok

WARNING: enabling "trust" authentication for local connections
You can change this by editing pg_hba.conf or using the -A option the
next time you run initdb.

Success. You can now start the database server using:

/usr/local/pgsql/bin/postgres -D /usr/local/pgsql/data
or
/usr/local/pgsql/bin/pg_ctl -D /usr/local/pgsql/data -l logfile start



Step 7: Validate the postgreSQL data directory
Make sure all postgres DB configuration files (For example, postgresql.conf) are created under the data directory as shown below.

$ ls -l /usr/local/pgsql/data
total 64
drwx------ 5 postgres postgres  4096 Apr  8 23:29 base
drwx------ 2 postgres postgres  4096 Apr  8 23:29 global
drwx------ 2 postgres postgres  4096 Apr  8 23:29 pg_clog
-rw------- 1 postgres postgres  3429 Apr  8 23:29 pg_hba.conf
-rw------- 1 postgres postgres  1460 Apr  8 23:29 pg_ident.conf
drwx------ 4 postgres postgres  4096 Apr  8 23:29 pg_multixact
drwx------ 2 postgres postgres  4096 Apr  8 23:29 pg_subtrans
drwx------ 2 postgres postgres  4096 Apr  8 23:29 pg_tblspc
drwx------ 2 postgres postgres  4096 Apr  8 23:29 pg_twophase
-rw------- 1 postgres postgres     4 Apr  8 23:29 PG_VERSION
drwx------ 3 postgres postgres  4096 Apr  8 23:29 pg_xlog
-rw------- 1 postgres postgres 16592 Apr  8 23:29 postgresql.conf



Step 8: Start postgreSQL database
Use the postgres postmaster command to start the postgreSQL server in the background as shown below.

$ /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 &
[1] 2222

$ cat logfile
LOG:  database system was shut down at 2009-04-08 23:29:50 PDT
LOG:  autovacuum launcher started
LOG:  database system is ready to accept connections



Step 9: Create postgreSQL DB and test the installation
Create a test database and connect to it to make sure the installation was successful as shown below. Once you start using the database, take backups frequently as mentioned in how to backup and restore PostgreSQL article.

$ /usr/local/pgsql/bin/createdb test

$ /usr/local/pgsql/bin/psql test
Welcome to psql 8.3.7, the PostgreSQL interactive terminal.

Type:  \copyright for distribution terms
\h for help with SQL commands
\? for help with psql commands
\g or terminate with semicolon to execute query
\q to quit

test=#