SUSE linux 10sp2安装多路径软件

说明：存储为华赛的S5300，如果存储为IBM或其他厂商的话，操作方法不一样，请注意！

bmp1a:~ # uname -a

Linux bmp1a 2.6.16.60-0.21-smp #1 SMP Tue May 6 12:41:02 UTC 2008 x86_64 x86_64 x86_64 GNU/Linux

所以安装smp版本的多路径：

bmp1a:~ # rpm -ivh UltraPath-2.01.022.suse10_sp2.x86_64.smp.rpm

bmp1a:~ # reboot

检查多路径是否安装成功:

bmp1a:~ # rpm -qa | grep Ul

UltraPath-2.01.022-1

bmp1a:~ # lsmod |grep up

upVhba 180672 0

upUpper 340444 1 upVhba

scsi_mod 170936 11 mptctl,upVhba,qla2xxx,scsi_transport_fc,mptsas,mptscsih,scsi_transport_sas,libata,upUpper,sg,sd_mod

驱动已经加载，多路径软件安装成功后，有两个驱动存在upVhba、upUpper，表示驱动加载成功。

查看启动项是否更改正确：

bmp1a:~ # cat /boot/grub/menu.lst

# Modified by YaST2. Last modification on Fri Nov 4 10:34:23 UTC 2011

default 4

timeout 8

gfxmenu (hd0,8)/message

##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###

title SUSE Linux Enterprise Server 10 SP2

serial=1,9600n8

root (hd0,8)

kernel /vmlinuz-2.6.16.60-0.21-smp root=/dev/sda2 crashkernel=64M@16M console=ttyS0,9600 console=tty0 hde=noprobe hdg=noprobe auto resume=/dev/sda1 splash=silent showopts elevator=noop

initrd /initrd-2.6.16.60-0.21-smp

###Don't change this comment - YaST2 identifier: Original name: xen###

title XEN

serial=1,9600n8

root (hd0,8)

kernel /xen.gz

module /vmlinuz-2.6.16.60-0.21-xen root=/dev/sda2 crashkernel=64M@16M console=ttyS0,9600 console=tty0 hde=noprobe hdg=noprobe auto resume=/dev/sda1 splash=silent showopts elevator=noop

module /initrd-2.6.16.60-0.21-xen

###Don't change this comment - YaST2 identifier: Original name: failsafe###

title Failsafe -- SUSE Linux Enterprise Server 10 SP2

serial=1,9600n8

root (hd0,8)

kernel /vmlinuz-2.6.16.60-0.21-smp root=/dev/sda2 crashkernel=64M@16M console=ttyS0,9600 console=tty0 showopts ide=nodma apm=off acpi=off noresume edd=off 3 elevator=noop

initrd /initrd-2.6.16.60-0.21-smp

###Don't change this comment - YaST2 identifier: Original name: LOCAL RESCUE###

title LOCAL RESCUE

root (hd0,8)

kernel /vmlinuz-2.6.16.60-0.21-smp root=/dev/sda2 hde=noprobe hdg=noprobe resume=/dev/sda1 splash=silent showopts init=/sbin/sulogin

initrd /initrd-2.6.16.60-0.21-smp

title Linux with UltraPath

serial=1,9600n8

root (hd0,8)

kernel /vmlinuz-2.6.16.60-0.21-smp root=/dev/sda2 crashkernel=64M@16M console=ttyS0,9600 console=tty0 hde=noprobe hdg=noprobe auto resume=/dev/sda1 splash=silent showopts elevator=noop

initrd /mpp-2.6.16.60-0.21-smp.img

说明：default 后面对应参数表示默认是从第几个启动项启动，对应找准启动项名称是以“title Linux with UltraPath”打头，表示启动项已经被修改正确

扫描设备：

bmp1a:~ # hot_add

Starting new devices re-scan...

delete LUN not mapped or mapping changed...

scan qla2 HBA host /sys/class/scsi_host/host4...

no new device found

scan qla2 HBA host /sys/class/scsi_host/host3...

no new device found

scan mptsas HBA host /sys/class/scsi_host/host2...

no new device found

run /usr/sbin/upadm start busscan...

scan mpp virtual host /sys/class/scsi_host/host5...

no new virtual device found

wait for syncing device reference count...

/usr/sbin/hot_add is completed.

bmp1a:~ # lsscsi |grep sd

[2:1:0:0] disk LSILOGIC Logical Volume 3000 /dev/sda

[5:0:0:0] disk up updisk 1 /dev/sdb

[5:0:0:1] disk up updisk 1
/dev/sdc

[5:0:0:2] disk up updisk 1
/dev/sdd

bmp1a:~ # fdisk -l

Disk /dev/sda: 73.2 GB, 73272393728 bytes

255 heads, 63 sectors/track, 8908 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sda1 1 1045 8393931 82 Linux swap / Solaris

/dev/sda2 1046 2351 10490445 83 Linux

/dev/sda3 2352 8908 52669102+ f W95 Ext'd (LBA)

/dev/sda5 2352 3004 5245191 83 Linux

/dev/sda6 3005 5615 20972826 83 Linux

/dev/sda7 5616 6268 5245191 83 Linux

/dev/sda8 6269 6921 5245191 83 Linux

/dev/sda9 6922 7052 1052226 83 Linux

/dev/sda10 7053 7705 5245191 83 Linux

/dev/sda11 7706 7967 2104483+ 83 Linux

Disk /dev/sdb: 64.4 GB, 64424509440 bytes

64 heads, 32 sectors/track, 61440 cylinders

Units = cylinders of 2048 * 512 = 1048576 bytes

Disk /dev/sdb doesn't contain a valid partition table

Disk /dev/sdc: 107.3 GB, 107373133824 bytes

255 heads, 63 sectors/track, 13054 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdc doesn't contain a valid partition table

Disk /dev/sdd: 128.8 GB, 128849018880 bytes

255 heads, 63 sectors/track, 15665 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdd doesn't contain a valid partition table

附加：

卸载多路径

如果不再使用多路径，可以将多路径卸载，卸载前请停止业务。

去激活所有虚拟盘上的VG。

1） 卸载LV的挂载点；

2） 查询虚拟盘上的VG状态是否为active状态；去激活虚拟盘上的VG

3） 卸载多路径

# rpm –qa |grep Ul 或者rpm –qa |grep Up

查询得到安装的多路径软件包名

# rpm –e 包名

卸载成功

4） 重启主机

# reboot