IBM刀片服务器管理模块恢复出厂默认值实战
2011-10-21 10:25
513 查看
IBM刀片服务器管理模块恢复出厂默认值实战
IBM官方文档如下:
Resetting the management module back to factory defaults
The BladeCenter management module has a reset button with which you can reset the module and return it to the factory defaults. This reset button is below the management module connectors, near the MAC address.Use a straightened paper clip or a similar item to access it. The reset button has two uses:
Reset the network configuration: Press and hold the reset button for 3 seconds or less.
Reset the entire management module (including user IDs and passwords) to the factory defaults. This requires a sequence of presses and releases:
a. Press and hold the reset button for 5 seconds.
b. Release the button and wait 5 seconds.
c. Press and hold the button for another 10 seconds.
Note that this sequence should be as precise as possible to ensure success: 5 in, 5 out, 10 in. After you do a full factory defaults reset in this way, the default user ID and password will be in effect: USERID (all caps) and PASSW0RD (a zero, not the letter O).
After the network configuration has been reset, you can access the Web interface to reconfigure it. To do this, you will need to know the management module's IP address. This can be done as follows:
The management module defaults to using DHCP. The host name will be MMxxxxxxx, where xxxxxxx is the MAC address of the management module. This number is printed below the reset button.
If no DHCP server is found, the management module uses a default IP address of 192.168.70.125 with subnet mask 255.255.255.0. The host name will be MMxxxxxxx.
实际操作:
1 按住reset 3秒会发现管理模块会重启,但是网络依然没有恢复
2 按住reset 5秒,放开5秒,在按5秒,依然没有恢复到出厂默认值
昨天折腾了一天问题依旧,昨天将刀片关机断电,今天重新加电,发现竟然恢复了出厂默认值,无言了。
总结:第一 按照IBM官方文档操作,第二,断电在加电重启。
IBM官方文档如下:
Resetting the management module back to factory defaults
The BladeCenter management module has a reset button with which you can reset the module and return it to the factory defaults. This reset button is below the management module connectors, near the MAC address.Use a straightened paper clip or a similar item to access it. The reset button has two uses:
Reset the network configuration: Press and hold the reset button for 3 seconds or less.
Reset the entire management module (including user IDs and passwords) to the factory defaults. This requires a sequence of presses and releases:
a. Press and hold the reset button for 5 seconds.
b. Release the button and wait 5 seconds.
c. Press and hold the button for another 10 seconds.
Note that this sequence should be as precise as possible to ensure success: 5 in, 5 out, 10 in. After you do a full factory defaults reset in this way, the default user ID and password will be in effect: USERID (all caps) and PASSW0RD (a zero, not the letter O).
After the network configuration has been reset, you can access the Web interface to reconfigure it. To do this, you will need to know the management module's IP address. This can be done as follows:
The management module defaults to using DHCP. The host name will be MMxxxxxxx, where xxxxxxx is the MAC address of the management module. This number is printed below the reset button.
If no DHCP server is found, the management module uses a default IP address of 192.168.70.125 with subnet mask 255.255.255.0. The host name will be MMxxxxxxx.
实际操作:
1 按住reset 3秒会发现管理模块会重启,但是网络依然没有恢复
2 按住reset 5秒,放开5秒,在按5秒,依然没有恢复到出厂默认值
昨天折腾了一天问题依旧,昨天将刀片关机断电,今天重新加电,发现竟然恢复了出厂默认值,无言了。
总结:第一 按照IBM官方文档操作,第二,断电在加电重启。
相关文章推荐
- 通过 Shell 和 Expect 脚本实现对 IBM 刀片服务器高级管理模块固件的大量升级
- HP C7000刀片服务器实战4:VC模块介绍
- HP C7000刀片服务器实战5:VC模块配置
- Windows+Server+2008服务器配置及管理实战详解
- HP刀片服务器C7000-Cisco网络模块配置指南
- [原创实践]IBM thinkpad T61制作和使用recovery光盘进行出厂系统恢复
- 一次多层架构实战后记--机构管理模块
- IBM刀片交换机模块32R1860链路冗余配置实例 shangxl@dc
- 推荐:IBM Lotus Domino 8.5 服务器管理入门手册(适用初学者)
- IBM BladeCenter 解决方案 基于 POWER™ 的刀片服务器平台
- IBM Flex System刀片服务器做虚拟化(刀片网络交换机调试部分)
- IBM刀片服务器配置IDE RAID的方法
- 投石问路 IBM于12月出货GPU刀片服务器(1) - 51CTO.COM
- VMware ESX Server 服务器数据恢复实战--攻破VMFS文件系统
- 实战Puppet 集中配置管理系统(2)——apache与nginx模块配置 推荐
- 实战3--设计管理模块, 第一步: 设计实体类和表
- IBM Lotus Domino 8.5 服务器管理入门手册
- 【IBM Tivoli Identity Manager 学习文档】10 TIM的Account默认值管理
- asp.net mvc+jquery easyui开发实战教程之网站后台管理系统开发3-登录模块开发
- Nodejs服务器管理模块forever