获取网络状态
2011-08-25 18:05
519 查看
点击打开链接
Linux_stat.c
view
plain
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <linux/if.h>
#include <linux/sockios.h>
#include <linux/ethtool.h>
int get_netlink_status(const char *if_name);
int main()
{
if(getuid() != 0)
{
fprintf(stderr, "Netlink Status Check Need Root Power./n");
return 1;
}
printf("Net link status: %d/n", get_netlink_status("eth0"));
return 0;
}
// if_name like "ath0", "eth0". Notice: call this function
// need root privilege.
// return value:
// -1 -- error , details can check errno
// 1 -- interface link up
// 0 -- interface link down.
int get_netlink_status(const char *if_name)
{
int skfd;
struct ifreq ifr;
struct ethtool_value edata;
edata.cmd = ETHTOOL_GLINK;
edata.data = 0;
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, if_name, sizeof(ifr.ifr_name) - 1);
ifr.ifr_data = (char *) &edata;
if (( skfd = socket( AF_INET, SOCK_DGRAM, 0 )) < 0)
return -1;
if(ioctl( skfd, SIOCETHTOOL, &ifr ) == -1)
{
close(skfd);
return -1;
}
close(skfd);
return edata.data;
}
在linux下使用ifconfigl命令能很方便的查看网卡与网线是否连通,运行ifconfig eth0命令大致输出如下:
其中的RUNNING就表示网卡与网线正常链接,拔掉网线再运行此命令就会发现RUNNING不在了。
我的目的是用C语言来实现程序,而linux系统提供了popen/pclose进程管道让C和shell很方便的交互,不过使用的时候要注意设置权限, 以免造成安全隐患。废话不多说,看下面C代码结合shell命令检测网卡与网线连通状况:
netstat.c
下面是编译运行程序的输出结果(正常返回1,断开返回-1):
# cc netstat.c
# ./a.out
NetStat = 1
Linux_stat.c
view
plain
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <linux/if.h>
#include <linux/sockios.h>
#include <linux/ethtool.h>
int get_netlink_status(const char *if_name);
int main()
{
if(getuid() != 0)
{
fprintf(stderr, "Netlink Status Check Need Root Power./n");
return 1;
}
printf("Net link status: %d/n", get_netlink_status("eth0"));
return 0;
}
// if_name like "ath0", "eth0". Notice: call this function
// need root privilege.
// return value:
// -1 -- error , details can check errno
// 1 -- interface link up
// 0 -- interface link down.
int get_netlink_status(const char *if_name)
{
int skfd;
struct ifreq ifr;
struct ethtool_value edata;
edata.cmd = ETHTOOL_GLINK;
edata.data = 0;
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, if_name, sizeof(ifr.ifr_name) - 1);
ifr.ifr_data = (char *) &edata;
if (( skfd = socket( AF_INET, SOCK_DGRAM, 0 )) < 0)
return -1;
if(ioctl( skfd, SIOCETHTOOL, &ifr ) == -1)
{
close(skfd);
return -1;
}
close(skfd);
return edata.data;
}
在linux下使用ifconfigl命令能很方便的查看网卡与网线是否连通,运行ifconfig eth0命令大致输出如下:
# ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:25:35:68:CC:D6 inet addr:192.168.1.168 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::215:c5ff:fe18:ccd6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:130722 errors:0 dropped:0 overruns:0 frame:0 TX packets:112560 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:104371099 (99.5 MiB) TX bytes:20518584 (19.5 MiB) Interrupt:16 |
我的目的是用C语言来实现程序,而linux系统提供了popen/pclose进程管道让C和shell很方便的交互,不过使用的时候要注意设置权限, 以免造成安全隐患。废话不多说,看下面C代码结合shell命令检测网卡与网线连通状况:
netstat.c
#include <unistd.h> #include <stdlib.h> #include <stdio.h> #include <string.h> /********************************************************************** * 函数名称: GetNetStat * 功能描述: 检测网络链接是否断开 * 输入参数: * 输出参数: 无 * 返 回 值: 正常链接1,断开返回-1 * 其它说明: 本程序需要超级用户权限才能成功调用ifconfig命令 * 修改日期 版本号 修改人 修改内容 * --------------------------------------------------------------------- * 2010/04/02 V1.0 eden_mgqw ***********************************************************************/ int GetNetStat( ) { char buffer[BUFSIZ]; FILE *read_fp; int chars_read; int ret; memset( buffer, 0, BUFSIZ ); read_fp = popen("ifconfig eth0 | grep RUNNING", "r"); if ( read_fp != NULL ) { chars_read = fread(buffer, sizeof(char), BUFSIZ-1, read_fp); if (chars_read > 0) { ret = 1; } else { ret = -1; } pclose(read_fp); } else { ret = -1; } return ret; } int main() { int i=0; i = GetNetStat(); printf( "/nNetStat = %d/n", i ); return 0; } |
# cc netstat.c
# ./a.out
NetStat = 1
相关文章推荐
- Android 获取网络状态的工具类
- Android如何获取网络连接状态(3G/Wifi)及怎样调用网络配置界面
- iOS实时获取网络状态之RealReachability
- linux 下获取当前网络连接状态的两种方法
- Android编程获取网络连接状态(3G/Wifi)及调用网络配置界面
- ios下获取所有实体/虚拟网卡的信息,并以此判断设备所处的网络状态
- Android编程获取网络连接状态(3G/Wifi)及调用网络配置界面
- ios获取当前的网络状态, 获取当前连接的wifi名字
- iOS 获取当前网络状态(转载)
- 获取网络状态,区分2G3G4GWIFI等,非reachability
- Android编程 获取网络连接状态 及调用网络配置界面
- Android编程获取网络连接状态(3G/Wifi)及调用网络配置界面
- Android如何获取当前手机的网络状态
- 获取网络状态,区分2G3G4GWIFI等,非reachability
- Android 广播BroadcastReceiver静态/动态注册,获取系统电量广播【开机广播】,获取网络状态广播,Timer的使用简介
- Delphi XE5 android 获取网络状态
- Python获取CPU使用率、内存使用率、网络使用状态
- Android端如何获取手机当前的网络状态,比如wifi还是3G, 还是2G, 电信还是联通,还是移动
- c#实时获取当前网络状态(转)
- android编程获取网络连接状态以及调用网络配置界面