同学的ok 6410的输出信息

Uncompressing Linux............................................................................................................................................................... done, booting the kernel.

Linux version 2.6.28.6 (root@jkeqiang-desktop) (gcc version 4.2.2) #232 Wed Jan 19 17:37:51 CST 2011

CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f

CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Machine: SMDK6410

Memory policy: ECC disabled, Data cache writeback

CPU S3C6410 (id 0x36410101)

S3C24XX Clocks, (c) 2004 Simtec Electronics

S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000

S3C64XX: HCLKx2=266000000, HCLK=133000000, PCLK=66500000

div1: 00000555

mout_apll: source is fout_apll (1), rate is 532000000

mout_epll: source is fout_epll (1), rate is 24000000

mout_mpll: source is mpll (1), rate is 532000000

mmc_bus: source is dout_mpll (1), rate is 44333333

mmc_bus: source is dout_mpll (1), rate is 44333333

mmc_bus: source is dout_mpll (1), rate is 44333333

usb-host-bus: source is mout_epll (0), rate is 24000000

uclk1: source is dout_mpll (1), rate is 66500000

spi-bus: source is mout_epll (0), rate is 24000000

spi-bus: source is mout_epll (0), rate is 24000000



音频总线？

audio-bus0: source is mout_epll (0), rate is 24000000

audio-bus1: source is mout_epll (0), rate is 24000000

audio-bus2: source is mout_epll (0), rate is 24000000

irda-bus: source is mout_epll (0), rate is 24000000



s3c64xx: 15728640 bytes SDRAM reserved for fimc at 0x5073b000

s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5163b000

s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x51e3b000

s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x5263b000

s3c64xx: 8388608 bytes SDRAM reserved for jpeg at 0x52c3b000

s3c64xx: 8388608 bytes SDRAM reserved for cmm at 0x5343b000

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024



cramfs根文件系统放在了/dev/mtdblock2下。

Kernel command line: root=/dev/mtdblock2 rootfstype=cramfs console=ttySAC0,115200



PID hash table entries: 1024 (order: 10, 4096 bytes)

Console: colour dummy device 80x30

初始化串口4：

s3c24xx_serial_init_ports: initialising ports=4...

console [ttySAC0] enabled





Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 256MB = 256MB total

Memory: 200064KB available (4600K code, 527K data, 148K init)

SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Calibrating delay loop... 530.84 BogoMIPS (lpj=1327104)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

net_namespace: 316 bytes

NET: Registered protocol family 16

S3C6410: Initialising architecture

S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics

Total 32 DMA channels will be initialized.

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

cfg80211: Using static regulatory domain info

cfg80211: Regulatory domain: US

(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

cfg80211: Calling CRDA for country: US

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 5, 163840 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP reno registered

NET: Registered protocol family 1



这个是指FPE，6410也需要这个么？这个是个硬件么？

NetWinder Floating Point Emulator V0.97 (double precision)



安装yaffs文件系统

yaffs Jan 19 2011 17:35:30 Installing.

msgmni has been set to 391

alg: No test for stdrng (krng)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)



S3C_LCD clock got enabled :: 133.000 Mhz

LCD TYPE :: LTE480WV will be initialized

Window[0] - FB1: map_video_memory: clear ff000000:0007f800

FB1: map_video_memory: dma=5f180000 cpu=ff000000 size=0007f800

Window[0] - FB2: map_video_memory: clear ff03fc00:0003fc00

FB2: map_video_memory: dma=5f1bfc00 cpu=ff03fc00 size=0003fc00

[DEBUG]logo_lines 0, vc->vc_bottom 34



logo不适用当前屏幕：

fbcon_init: disable boot-logo (boot-logo bigger than screen).



现在应该把控制台转向帧缓冲设备了吧。

Console: switching to colour frame buffer device 60x34

fb0: s3cfb frame buffer device

Window[1] - FB1: map_video_memory: clear ff080000:0007f800

FB1: map_video_memory: dma=5f200000 cpu=ff080000 size=0007f800

Window[1] - FB2: map_video_memory: clear ff0bfc00:0003fc00

FB2: map_video_memory: dma=5f23fc00 cpu=ff0bfc00 size=0003fc00

fb1: s3cfb frame buffer device

Window[2] - FB1: map_video_memory: clear ff100000:0003fc00

FB1: map_video_memory: dma=5f140000 cpu=ff100000 size=0003fc00

fb2: s3cfb frame buffer device

Window[3] - FB1: map_video_memory: clear ff140000:0003fc00

FB1: map_video_memory: dma=5f280000 cpu=ff140000 size=0003fc00

fb3: s3cfb frame buffer device

enter s3c6410_leds_init

leds initialized

s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10

s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10

s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10

s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10

brd: module loaded

loop: module loaded

PPP generic driver version 2.4.2

dm9000 Ethernet Driver

eth0: con201 Invalid ethernet MAC address. using default config, Please set using ifconfig

eth0: dm9000 at f7b00300,f7b00304 IRQ 108 MAC: 00:e0:4a:bc:15:e7

usbcore: registered new interface driver asix

usbcore: registered new interface driver cdc_ether

usbcore: registered new interface driver net1080

usbcore: registered new interface driver rndis_host

usbcore: registered new interface driver cdc_subset

usbcore: registered new interface driver zaurus

usbcore: registered new interface driver zd1211rw

usbcore: registered new interface driver rndis_wlan

usbcore: registered new interface driver zd1201

libertas_sdio: Libertas SDIO driver

libertas_sdio: Copyright Pierre Ossman

usbcore: registered new interface driver lbtf_usb

Linux video capture interface: v2.00

s3c-fimc: controller 0 registered successfully

s3c-fimc: controller 1 registered successfully

printk ov965x_init

s3c-fimc: info ov965x_init

S3C6400 MFC Driver, (c) 2007 Samsung Electronics

S3C6400 MFC Driver, (c) 2007 Samsung Electronics

S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics

S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics

S3C6410 TV encoder Driver init OK.

S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics

S3C6410 TV scaler Driver init OK.

S3C Rotator Driver, (c) 2008 Samsung Electronics

s3c_rotator_probe called

s3c_rotator_probe success

S3C JPEG Driver, (c) 2007 Samsung Electronics

s3c_g2d_probe called

s3c_g2d_probe Success

S3C G2D Init : Done

S3C G3D Driver, (c) 2007-2009 Samsung Electronics

s3c_g3d version : 0x1050000

S3C G3D Init : Done

S3C CMM Driver, (c) 2008 Samsung Electronics

Driver 'sd' needs updating - please use bus_type methods

S3C NAND Driver, (c) 2008 Samsung Electronics

select s3c_nand_oob_mlc_128

S3C NAND Driver is using hardware ECC.

NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)

Creating 4 MTD partitions on "NAND 2GiB 3,3V 8-bit":

0x00000000-0x00040000 : "Bootloader"

0x00040000-0x00400000 : "Kernel"

0x00400000-0x05400000 : "Rootfs"

0x05400000-0x80000000 : "File System"

Samsung SoC SPI Driver loaded for SPI-0

Max,Min-Speed [33250000, 129882]Hz

Irq=80 IOmem=[0x7f00bfff-0x7f00b000] DMA=[Rx-33, Tx-34]

Samsung SoC SPI Driver loaded for SPI-1

Max,Min-Speed [33250000, 129882]Hz

Irq=81 IOmem=[0x7f00cfff-0x7f00c000] DMA=[Rx-35, Tx-36]

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1

s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics

s3c-udc : version 15 March 2009 (DMA Mode)

mice: PS/2 mouse device common for all mice

gpio keys driver.

input: gpio-keys as /class/input/input0

S3C Touchscreen driver, (c) 2008 Samsung Electronics

S3C TouchScreen got loaded successfully : 12 bits

input: S3C TouchScreen as /class/input/input1

S3C24XX RTC, (c) 2004,2006 Simtec Electronics

s3c2410_rtc: tick irq 34, alarm irq 92

s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling

s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0

i2c /dev entries driver

s3c2440-i2c s3c2440-i2c: slave address 0x10

s3c2440-i2c s3c2440-i2c: bus frequency set to 377 KHz

[OV965X]ov965x_attach_adapter.

[CAM]s3c_fimc_register_camera,cam->id=0

parent clock for camera: 266.000 MHz, divisor: 11

[CAM]RESET CAM.[CAM]Reset and init reg!1cam->client=0

[CAM]Reset and init reg!1

[CAM]Reset and init reg!3

s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (44333333 Hz)

mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA

sdhci: card inserted.

s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)

s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (44333333 Hz)

mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA

usbcore: registered new interface driver usbhid

usbhid: v2.6:USB HID core driver

Advanced Linux Sound Architecture Driver Version 1.0.18rc3.

ASoC version 0.13.2

WM9713/WM9714 SoC Audio Codec 0.15

playback: 1, capture : 1

asoc: AC97 HiFi <-> s3c64xx-ac97 mapping ok

[WM9713]Open speaker volume.

ALSA device list:

#0: SMDK6400 (WM9713)

TCP cubic registered

can: controller area network core (rev 20081130 abi 8)

NET: Registered protocol family 29

can: raw protocol (rev 20081130)

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

ieee80211: 802.11 data/management/control stack, git-1.1.13

ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>



看到VFP了。这个是硬件还是软件呢？

VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

s3c2410-rtc s3c2410-rtc: setting system clock to 2000-04-21 15:07:44 UTC (956329664)

mtd->size = 5000000 blocks = a0

cheaking bad block...............

................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................VFS: Mounted root (cramfs filesystem) readonly. 挂载carmfs作为根文件系统

Freeing init memory: 148K

mmc0: new high speed SD card at address b368

mmcblk0: mmc0:b368 MSD 1.85 GiB

mmcblk0: p1

*************************************

http://www.witech.com.cn

*************************************

mkdir: cannot create directory '/mnt/disk': File exists



yaffs放在了mtdblock3中。

yaffs: dev is 32505859 name is "mtdblock3"

yaffs: passed flags ""

yaffs: Attempting MTD mount on 31.3, "mtdblock3"

block 1865 is bad

block 1867 is bad

block 2027 is bad

block 2754 is bad

yaffs_read_super: isCheckpointed 0



这是在什么地方做了一个cp的命令。

cp: cannot stat '/mnt/disk/pointercal': No such file or directory

Try to bring eth0 interface up......eth0: link down

Done



Starting Qtopia, please waiting...

touch...



Please press Enter to activate this console.

[root@OK6410 /]# usb 1-2: new full speed USB device using s3c2410-ohci and address 2

usb 1-2: device descriptor read/64, error -62

usb 1-2: device descriptor read/64, error -62

usb 1-2: new full speed USB device using s3c2410-ohci and address 3

usb 1-2: device descriptor read/64, error -62

usb 1-2: device descriptor read/64, error -62

usb 1-2: new full speed USB device using s3c2410-ohci and address 4

usb 1-2: device not accepting address 4, error -62

usb 1-2: new full speed USB device using s3c2410-ohci and address 5

usb 1-2: device not accepting address 5, error -62

hub 1-0:1.0: unable to enumerate USB device on port 2



[root@OK6410 /]#